FS2CREW: FLY BY WIRE A32NX PROJECT

I have an issue at takeoff After the Before Takeoff checklist down to the line and below the line, after having received Takeoff clearance, I line up on the runway. I announce Ready? received the answer from FO Ready I announce Takeoff, push the throttle to FLX MCT. FO announce 100knots and just after is asking to stop the plane and check list assist gives me these options: Lets Taxi back to the runway Lets taxy back to the Gate Flaps 1 What am I doing wrong? Thanks for the help Maurizio

is ti possible to temporary disable fs2crew from starting at launch of msfs? i.e. when I want to fly vfr routes.

When I had first installed FS2Crew, when starting the automation the gateway (if available) would approach the A320. "Let's get started" I had upgraded by drive and reinstall everything. All works well with flows except the gateway no longer auto connects. Any ideas?

Hi! I'm getting my mic stuck on vPilot and I am suspecting it has to do with FS2Crew...Has anyone experenced this or do you think its related to Fs2Crew? Any help would be really appreciated!

Just a feature request for shorter pre-flight events. I enjoy the FO setting up the electricity and going for his walk-around, but I use PACX for all the boarding stuff, so I always end up muting the cabin and just forwarding through the rest of the PFE flows once the FO gets back on board. I would love an option to have the PFE flows end after the FO returns.

Hello Bryan Since installing the latest beta, for both PBE and FBW, I get an "ERROR! - configuration system failed to initialize" error message that pops up every time I start FBW. Any ideas? On a side note, I cannot launch the application from inside MSFS. I get a "Warning: External FS2Crew Command Centre program not running. Cmd Centre now inop. Probable EXE.xml corruption problem. See FS2Crew Support Forum." The thing is , Command Centre (the red plane nose) does launch on MSFS startup without any problems. If I Launch the program (PBE or FBW) from outside the sim, it connects and works. I have always had this issues since the start. I have uninstall…

Hi, could you make it possible to manually adjust the boarding time (so only the door closing part is affected)? I use PACX and it determines how long it takes to load passengers depending on the number of passengers. I would like to be able to push a button to close doors when PACX boarding ends. Usually, PACX boarding takes 10-15 minutes longer than FS2Crew boarding. I would assume this is also of interest to SLC users. Two ways I can think of making this work: - Add an option for infinite PFE time. Essentially, the time between the end of boarding and the event just before extends indefinitely until the user commands end of boarding. I'd assume this woul…

Have been wanting to inform you about this since beta-1 but didn't get to it, sorry about that. I have FBW on my secondary monitor. Now when I minimize the main display to the taskbar and then bring it back again to the secondary display, 99% of the time FBW's display is broken, displayed incompletely. Hitting the Info icon or any other icon in the top bar a few times gradually repairs it, even hovering over the lowest part of FBW's screen can help here as well. Are you aware of this undocumented feature or can the culprit be at my contraption?

Now, with the FO switches the "No Smoking/No electronic devices to ON" and he does not switch it to Off. I use the Experimental version, not the Dev version (may be here lies the problem). It would be good if he would set that to "Auto", and keep it like this for all the flight. Another improvement, which somebody else already suggested, would be to switch the brightness of all screens to 50%, as part of the PFE flow. And perhaps also turning on the panel lights, at least when the system time is nighttime... Amazing app, couldn't live without it now, so keep doing the great work!

If you just installed the latest PBE public beta that includes VR support, and you're finding that the VR subpanel is not opening in FBW anymore, re-install FBW: https://downloads.fs2crew.com/fs2crew_downloads/public_betas/fs2crew_msfs_public_betas.zip

Hi @byork. Thank you for finally releasing a great mod! While I am learning its ins and outs it immediately caught my attention that it is not VR-friendly and I fly exclusively in VR. First feature that I really missed is ability to bind the PTT button to my joystick button. It is really uncomfortable to try finding a letter key with the helmet on. Do you plan to add that capability to utilize joystick buttons along with the keyboard buttons? Second, there just has to be a way to display the list of currently applicable voice commands in-sim (it could be a tab in the top menu as you can open it and then move in the 3d space). I know you said it is needed to memorize the v…

so bought the a32nx one and pushback express. Still on the learning curve 🙂 but managed to arrive I think till I take off and climb. After I do the take off and climb checklist it still remains there so I dont know if I missed anything or how to trigger the descent than or what comes after, Forgot to mention that I run both in VR. UPDATE: Sorted....needed to say below the line to continue which did not show up in the panel 🙂 am totally enjoying this 🙂 hope to see it on the CRJ soon as the FBW creates me stutters in VR Moreover, hope that in the future we have a moving copilot like what I have in xplane and the toliss a320.

Hello I can not use the EU voice set (German) the still speaks in English. Although I have selected in the settings everywhere EU.

Hi, FS2Crew don´t understand my readback "XXX set" for the minimums during approach checklist (voice control). If I say "set and checked" it reads the minimums correct back as it was set in the MCDU. From the P3D version I remember there was a need to set the minimums in the approach settings. Is there something similary in the FBW version? Thanks, Holger

Hi all, how can I define hard and soft mute? Is it possible to link soft mute to a joystickbutton? Thanks and best regards, Holger

Good Day, I would like to buy FS2Crew for the A32nx. I am currently running the stable version of the NX. I have tried the development version without success. Can I use the stable version or do I need the other version. Any help on this would be great. CHeers, George Ingram

Voice recognition stopped working after i updated the 2 programs to the latest versions including the beta a32x version. I have tried everything remvoing the folders from community folder, uninstalling both and cmd centre and reinstalling both Removing audio drivers and restarting windows. Everything i have done including trying default fbw livery and i still dont get any voice working red light lights up in program showing joystick button pressed but 99% of the time doesnt work. Also keyboard voice activiation not working even though red light on interface when key pressed. I really need some help... ive not been able to use fs2 crew or pbe for a mont…

Hello only a suggestion ... It will be posibilty to do and option to auto mute de mic when passing certain time? I think it could be interesting this option, for people who use open mic and forgot to desactivate the mic like me. Thanks

Please how can i avoid to lost continusly my selected option in Fs2Crew A32NX?. Many times after i change my options, and after complete a flght, i find that when i start other flight (after restart or shutdown my computer) when i run fs2crew or some times pbe too, the program start like the first time. it didnt save my selected options It could be interesting to have a posibility to have an user profile config option. So it would be less problem when this happen. Thanks

Sorry posted this question in the other FS2crew forum. Should be in this one. Anyway, my FO always wants to set the pitch trim at 0 or 26% even though the MCDU has a value other than 26% after I start the engines. Am I missing another setting in the MCDU?

Hi Bryan, I use the Beta Version of FSCREW and all works well since the update was comming out yesterday. I fly with the voicecontrol and the Button 1 on the Thrustmaster Airbus stick was for speeking. When I use it, the micro goes red but FSCREW can´t here me. Only when I use the CursorI can speak to my copilot, then the Microgoes gre and it works. Roland

Hello, i have a question... is it possible to add a female pilot voice? Thank you in advance 🙂 Kind regards Sarah

I know this issue has been touched in other threads, but I consider it important enough for a thread of its own. I would really love to use open mic mode with a push-to-mute button; one I could also assign for VATSIM's push-to-talk button. That way, I would mute FS2CREW while talking to ATC and FS2CREW would listen to me when not talking to ATC. It would be like switching from intercom to transmit in a real plane and it would be so much more intuitive and realistic than having two separate PTT-buttons for ATC and CREW. Might be, I'm abit simple minded here, but that just confuses me. I really hope this option will make it into 1.1. Thanks in advance and aga…

Hi Fs2crew, I just purchased FBW project. I have problem with the connection to Fs2crew server. I live in China, I have vpn to bypass the restriction. But, can you guys give another solution to not use vpn all time? Because the vpn connection is not that stable.

Spoiler keep getting this message : WARNING : EXTERNAL FS2 CREW command center program not funning . cmd center now inop .probable PROBABLE EXE.xml corruption problem: when i try to launch application : ps have started msfs2020 and cold and dark at airport thanks for any help gary