TTools for MSFS Forum

Is possible to have AI planes fly a specific route between two airports.For example, take-off, turn left to 270 degrees fly direct to Yoo NDB then direct destination.

Hi all, 2 quick questions about AI traffic.1) How come even at quiet airports, aircraft just appear at the gate rather than arrive (land) in the usual way? This seems to be for certain aircraft only. For example, I have never had a Virgin A340-600 actually land at EGLL or any other airport. They just appear at the gate - even if there was a gate for it to taxi to after arrival. Is there a setting I need to adjust?2) If I go to certain times during the day (usually around 03:00), about 30 AI aircraft are all in the air very close together. Has anybody else experienced this and knows how to correct it?Apologies if these questions have been covered before.Cheers,

i downloaded the WoAI Installer v.2.04 for downloading AI Traffics/Aircrafts into FSX. But when i attemped to install the files, (afer i clicked the "agree" button of the policy, and i popped out a window saying error. i attached 3 pictures which is my procedure of installing the AI Traffics. Is there any solution that can help me to solve this situation? Fell free to tell me or discuss together. Many Thanks. =]p.s. I'm a FSX flyer.Jason @ VHHH

HelloI have got problem with World of AI traffic. I have instaled .net framework 2.0 but I have got still a problem. Some of airlines works good like British airways, Iberia, Amierican airlines that planes are everyware but some are not like KLM, SAS, Air France or Alitalia. I mede airport bigger but still I see for example at Paris CDG airport only two or tree airf france planes. The same problem is on every airport like Amstedam or Milan. What is wrong??

Hello All, Sorry if this is a long post.I am making an enquiry to see if any one is interested in furthering the development of TrafficViewBoard (TVB) to make it compatable with FSX.I have attempted to contact the author of this super freeware ai timetable program, but have had no success. The user forum is also closed.Naturally, any modifications to the program would need to be credited with the original author.There is a similar freeware program called AI Timetable (AITT) by Genex Software, but I have never been able to get this to work as it should, both in FS9 and FSX.I found the 2 distinct advantages with this application were that it would sit on TOP of the flightsi…

Have the Ameriflight, DHL North America and Kitty Hawk Aircargo plans all been pulled from AVSIM? I was trying to reinstall traffic for PDX and need these plans. Does anyone out there have them that could send them to me? Thanks.Regards,[email protected]

Hi Guys and Gals,I hope someone in FS-land can help me before I go completely mad!.I bought Traffic Board when it was first released and kept with updates for FS2004 when it was released etc.I have just changed my computer and having trouble getting traffic board up and running and now discovered it is no longer on sale and that all lines of communication and support has been cancelled leaving me with no-one to ask for help.I'm pretty annoyed that i buy a shareware product then am left high and dry.If anyone can help please get in touch (directly would be easier for me) and I'll give you more details of the problems I'm having....Thanks in advanceAdrianadybear@btinternet.…

I am trying to create some AI Plans and I have heard of a Utility that will check and verify the plans for errors or issues like excessive hold times. I searched both MRAI Companion and TTools/Companion and nothing comes up except for Flight Plans that have been checked with this Utility. Thanks, ahead.Jim

Hi AllIm in the process of creating a new scenery for Newcastle Airport using EZ Scenery and have spent the last week creating a reasonably accurate Afcad2 for it.Just a question to see if anyoen could give me some advise.Newcastle has one runway 07/25. The 07 end is closest to the terminals and as such is normally where flight departs from. As far as i can remember the last time i flew into Newcastle we came in over the North Sea and landed on 25. This would mean in effect that there is take off from 07 and landing on 25. Ive been reading through the posts to find out if it possible to replicate this in Afcad2. At present 07 is used for both landing and takeoff, despite…

Hi Gang,I'm trying to work out weather it is AES or myself that seems to have done something with the default ATC in FS9.I made a back up copy of my traffic bgl file first, then used it to alter some aircraft landing and taking off parameters.I changed a few of the boring standard AI planes for a few of the payware ones I have.but now I can't seem to get the ATC window to open.I have the three boxes checked in the fs menu, and still it won't work.so, do you think this is AES which I have just removed, or something to do with my AI things.I did read up on several tutorials,and the AI do perform flawlessly, and I used AFCAD and TTools to do it.any thoughts would be most wel…

Hi!I would be grateful if somebody can direct me to a website or another useful source where I can get a summary list of all (!) the airlines in the world.Thanks in advance...Rustamhttp://www.precisionmanuals.com/images/forum/747400.jpg

Hello friends,I am facing a strange problem with TTool2.0 & AFCAD. The TTool is not compiling the flies (Aircraft, Airport & Flightplan). Decompilation is fine, but when click for compiling, the tool closes with the (message as attached) The path is C:Program FilesMicrosoft GamesFlight Simulator 9SceneryWorldsceneryFor rechacking, I installed in C: Program Files / TTool .... but no good news I have reinstalled windows as well, but problem still exists. Yes, after reinstallation of windows, one time it was complied.AFCAD is also creating same kind problem, when I click to open it doesn

Hello,I have good deal of excellent quality taffic models like Ai Aardvark sitting on my hd and want to substitute them in for MyTraffic acft keeping the MyTraffic flight plans.Before, with packages like PAI I used to simply decompile the traffic.bgl and sub in the acft lines and then compile again. Worked.With MyTraffic, the TTools can't depict the traffic.bgl files although they are there (in the world/scenery folder).Any suggestions?ThxIL76

when will TTools be compatible for FSX???if it already is could someone tell me where to get it???

Hi all,I noticed some strange things happening to my AI traffic. I have quite a few new FP's, downloaded here from Avsim, and I have removed the fixed arrival time (@ symbol) from these plans because I had trouble with that earlier.The plans are recompiled by Vanderlei Martinelli's Traffic Manager (which includes Traffic Tools). Actually, the plans do work fine, when I open MS TrafficToolbox, I see all aicraft appear as they should do according to the FP's. However, after appearing, after a short while, many large airplanes and some small ones dissapear before landing. It's not happening all the time and not only with certain models, but it happens very often.AIA Boeing 7…

I'm not sure if this is the right place, but here is my problem. I just started exploring this concept of making airport parking spoats and modifying runways. Pretty neat stuff but my exploration was cut quite short. I cannot even operate AFCAD at all. I open the program and click open airport. The program starts loading all airports but stops after 2 lines. Finally I get the dreaded program is not responding. Turns out that I get hung application message when I view the all too common error report. I'm not sure what the problem is, and I am no computer wiz. If anyone has come accross this problem before and knows a fix, any enlightenment would be greatly appreciated.v/rT…

i want to compile my custom realworld schedules for my realistic airport for fsx using trafficdatabasebuilder. i downloaded the fs2004 plans and converted them to fsx format using a utility; but this silly application just wont compile because it finds many remote untouched airports overparked or with not large enough bays. man!, i cant manually go on adding parking to these hundreds of airports just to make this stupid thing compile them successfuly.is there any other way out from this? ideas please!

hey guys am not sure if am supposed to be here I do need some help.I install scenery for puerto Rico but the ia traffic is still using the default taxiway..any help would be appreciated..Ron

many must be knowing that 2-3 months back very detailed fedex ai flightplans were loaded into the library, it has been years since someone uploaded good ones for this carrier. but call it bad luck, they have been removed from there. i need to download them again.anybody having them please let me know, post the link if you find them anywhere else on the net

Some of you might be interested in these. If you would like to get some information from these let me know and I will do what I can to get the information to you. Some are quick reference tables for just Houston and I will denote that on the list. Air Florida Jan 80 Feb 81Allegheny Oct 78 Feb 79American Jan 81 Houston onlyBraniff Oct 78British Cal Oct 80Continental Sep 80Delta Oct 78 Houston only Dec 80 Houston only Eastern Sep 78 Jan 80 Jan 81 Houston only Frontier May 80 Sep 80 Dec 80 Houston onlyHughes Air Jan 80 Houston onlyMetro Air Aug 78National Nov 78 Houston onlyNorth Central Dec 78 NW Orient Oct 78 June 80 Jan 81Ozark Jan 79 Feb 80 Aug 80 …

Hi folks!I downloaded the AI Flight Creator 1.7.4 to make own flightplans.I have the following problem:The program does not show me any available aircraft textures,nor does it give me the airport codes to choose.I think it does not get the informations from the FS9.Any help?Alex from LSZH

helloI have been looking for a real Traffic tooli wat to add real traffic just like the real ife traffic and real routes, real times... everything is realis there kinda thing?Paywares okfreewares okand not to like manualy add them I want it like PAI but real and niceby the way, is PAI real with real routes and airlines?

Hello all,I have been trying using AI Flight Creator to add one AI plane that flies from KAPF to KEYW three times a day. I have tried making 3 separate pairs of legs. (eg: KAPF-KEYW-KAPF in the morning, afternoon and night). I have tried making one big flightplan, eg: KAPF-KEYW-KAPF-KEYW-KAPF-KEYW-KAPF, all with correct arival & departure times but I end up with sometimes 7-8 copies of this ac on the ground? I'm really tearing my hair out... this is my first attempt at making some original traffic. Well, if anyone, Tom Gibson, Reggie Fields, any kind soul could point me in the right direction?Thanks all,Tosh:-grr

Hello,I am having trouble finding *any* UPS flight plans for AI anywhere on the net. I find this odd considering how big UPS is! All I see is World of AI's package. But I just want the flight plans...Anyone know how to obtain a flight schedule for UPS so that I can make my own?RhettAMD 3700+ (@2310 mhz), eVGA 7800GT 256 (Guru3D 93.71), ASUS A8N-E, PC Power 510 SLI, 2 GB Corsair XMS 2.5-3-3-8 (1T), WD 250 gig 7200 rpm SATA2, CoolerMaster Praetorian case

I read in the Ttools readme that ai aircraft will only use the runways that atc tells them to. For instance at LAX the wind was 240@10, and like most of the time at LAX the 25's and 26's were the optimal runways yet all my AI traffic was coming in over the ocean and landing and taking off on the 7's and 6's. Anyway to make these guys use the right runways? Thanks.