Zimmerbz

I found another issue with Pop Out Manager that I was hoping to get some guidance. I was able to get all my pop outs working on their panels but after a few flights, I realized they weren't fitting exactly how I wanted them. I decided to create a new profile and get that how I wanted (so i thought) yesterday. I went into a flight today and started to pop them out per my set up and half of the panels failed. I then noticed that my previous profile is gone... I can't find it in the app. I tried creating a new one today and would get them failing on pop out again. When I tried to do it without the pop out manager, the pop outs would disappear. Thoughts?

thanks

Can I use FSUIPC for just that binding and everything else in MSFS since it is already set up?

Can anyone tell me how to properly bind the Throttletek spolier lever? It is the only lever on the throttle I have not been able to get working in the Fenix. In 2020, I had it bound correctly to FSLabs but with the Fenix, I can't get it to bind in 2020 or 2024. I can arm the spoiler, but when I move the lever, it "twitches" for lack of better description. The arming and disarming just goes up and down. Any thoughts?

Thanks. Do you know how to remove the white title bars on the pop out? I thought there was a tab in the settings but I do t see it. Copilot seems to think I have the lite version but I didn’t see multiple versions to download

I was hoping I could get some help from you all. I asked copilot but that didn't help. I've recently been popping out panels and putting them on other displays for my home/desktop cockpit. I was doing it without any help from pop out manager until I ran into an issue. I somehow "lost" my Fenix ND on the captain side. When I do alt - right click nothing happens and it disappears. I did some reading and it seems that it is because it is going to an old location that isn't there anymore. My short fix is that I drag the ND from the first officer over to my side. The issue is, I have to use the FO FCU buttons. I tried using Pop Up Manager and thought that would be a fix, but that was the only display that kept failing when popping out. Any suggestions on a fix? If you need more info, let me know. Thanks

I didn't know that was an option. I'll check that out. Thanks

Right now I have Active Sky on with Atmos Core flying from KDTW-KORD. There are storms all in the vicinity of chicago but I don't see any storm clouds. It is one layer of overcast. Is that a MSFS/AS fault or are my setting off?

My specs are below. I run MSFS 2024 and currently have driver 591.86 installed. I was messing around and asked copilot based on my specs, what Nvidia driver should I be using and they said that the 3080ti's best choice for smoothness, etc would be 566.14. What do you all think about that? Am i doing a disservice using 591.x or is that better? Intel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State Drive

So you guys are using a weather preset for Atmos Core and running Active Sky and don't have conflicts? What about weather force? What do you mean by "typical weather"? Are these weather presets or the other ones?

It has been a while since I have looked into my weather set up so I figured I'd check here to see what the latest is. I currently own Active Sky, Rex Atmos Core, and Rex Weather force. I haven't run Weather Force in a very long time. Currently, i run live weather in Active Sky and then turn on Atmos Core but don't pick a weather setting in Atmos Core. Is there a scenario where I should be using Active Sky along with Atmos Core but selecting the weather tab in Atmos? Could I use AS, Weather Force and Atmos Core together? Any settings in any of these I should be using vs. not? I have found that my current set up the clouds are visually lacking and I was looking to better improve my weather. I fly IFR only. Let me know what you all see out there and what works best. If there are any other addons i should look into, let me know. Thanks!

Question... I use Atmos Core and Active sky but have always tuned the weather in Atmos core off. Does it enhance Active Sky or cause issues with weather when running both?

I too would love to hear if something is out there. I had some great sounding packs for P3D back in the day but haven't seen any for MSFS

Thanks everyone! I'll try all of the reccomendations

I did these suggestions and found that when it is smooth, it is smoother than ever before. However, It will go into spurts of stutters that some out of nowhere that are really bad. I gotta figure this out! The stutters seem to come when accelerating and turning

Do you pop out displays onto an iPad? I find that my performance is great until I do that. I use Spacedesk

Also frame gen can work with a 3080ti right? How can I be sure?

I’ll give this all a try. Is there anything in the Fenix app that I can change that would help with using pop outs on different displays?

When I change settings I usually go to the most congested area to use that as a benchmark. It might not be the best idea but I always feel like if i can get something somewhat smooth in the worst areas I should be good. I'll turn my display in the display settings to 30hz instead of 60 and see if that makes any difference. I can also turn Frame Gen back on. As a last resort I can try using AutoFPS again. I thought i had it on but apparently I didn't. I do recall like what you were saying, it made dense cities sparse which defeats the purpose but might also be inevitable. Thanks I'm open to any other suggestions because I really like this setup but need a little bit smoother of an experience!

Are there any alternatives to that to accomplish the same thing?

I will also mention that as a test at a heavy INIbuilds JFK without the pop outs and displays as I mentioned, I am at 30 FPS. Once i turn on Spacedesk and pop the panels out to the other displays, it does down to 15-30 fps at idle on the runway

looks like 60 hz

Currently I fly the Fenix in MSFS 2024 along with deskline MCDU and FCU from Skalarki. I recently decided to use my iPad for my ND and PFD as well as a secondary monitor for my EFB. My main display is an ultrawide 49" curved Samsung. I fly with PSXT and Real Traffic or Vatsim and fly into and out of 3rd party airport. This setup looks great but I've noticed on approach and when on the ground in general, i get lots of stuttering. I am also using Active Sky and Rex Atmos Core. My Nvidia Settings are as follows: V-sync on in Nvidia, off in MSFS Max frame rate 50 Low Latency On Power - Prefer Max Performance In the Sim I have these settings: 5120x1440 - 100 Render Scale TAA (I found DLSS made it worse) Frame Generation Off (maybe turning it on?) TLOD 200 Objects LOD 100 Texture res Ultra Clouds High Aniosotopic 16x Cockpit refresh low Since I am primarily looking out of the cockpit and on my ipad, what are some settings I should change in order to get a smoother experience? I'm not too technical so hopefully this makes sense. Maybe what I am trying to do isn't realistic but i thought I'd try here. I'm open to trying anything, but wasn't sure where to start. Thanks! These are my specs: ntel Core i7 12700K (5.0GHz Max Boost Clock) 12-Core CPU 32GB G.Skill Performance DDR4 SDRAM 3600MHz Graphics Processor:12GB Nvidia GeForce RTX 3080 Ti, GDDR6x System 2TB Western Digital, NVMe M.2 Solid State

V-Sync yes

I just started using Spacedesk to pop out some panels on my ipad with the Fenix. I have always used the desktop line Skalarki MCDU and FCU. Now that I have incorporated Spacedesk, my MCDU does not align with my push buttons on the MCDU. It is almost like the display got smushed down a bit. I can't seem to figure out how to fix it. Any ideas? Thanks