September 6, 20214 yr Author Also I did not check anything else in the Nvidia control panel, only ticked the box adaptive refresh rate inside Prepar3D.
September 6, 20214 yr The only time I tried G-sync (in my Freesync monitor), I started getting DXGI_ERROR_DEVICE_RESET errors. Sadly I had to disable it. Maybe I did something wrong (for example, enable Gsync while having FPS locked at 30 in either NCP or RTSS), but this is the only way I've suceeded making P3D crash. Best regards, Luis Hernández Main rig: self built, AMD Ryzen 7 5700X3D (with SMT off and CO -50 mV), 2x16 GB DDR4-3200 RAM, Nvidia RTX 5060Ti 16GB, 256 GB M.2 SSD (OS+apps) + 2x1 TB SATA III SSD (sims) + 1 TB 7200 rpm HDD (storage), ID-Cooling SE-224-XTS air cooler, Viewsonic VX2458-MHD 1920x1080@120-144 Hz (G-sync compatible), Windows 11. Running P3D v5.4 (with v4.5 scenery objects as an additional library, just in case), FSX-SE, MSFS2020, MSFS2024 and even FS9. XP11 and 12 installed, just for curiosity. Mobile rig: ASUS Zenbook UM425QA (AMD Ryzen 7 5800H APU @3.2 GHz and boost disabled, 1 TB M.2 SSD, 16 GB RAM, Windows 11 Pro). Running FS9 there for airliner ops. FSX-SE also installed, just in case. Lossless Scaling in al my rigs. What a godsend... VKB Gladiator NXT Premium Left + GNX THQ as primary controllers. Xbox Series X|S wireless controller as standby/mobile.
September 6, 20214 yr Author 1 hour ago, Luis Hernandez said: The only time I tried G-sync (in my Freesync monitor), I started getting DXGI_ERROR_DEVICE_RESET errors. Sadly I had to disable it. Maybe I did something wrong (for example, enable Gsync while having FPS locked at 30 in either NCP or RTSS), but this is the only way I've suceeded making P3D crash. I have frame rate set to unlimited
September 6, 20214 yr 4 hours ago, Chapstick said: If you're on V5, try G-Sync on and VRR on in P3D (vsync and triple buffering off). Set the limit in CP to 36 (1/4 of 144hz). Leave your monitor at 144hz. do you leave vsnyc on or off in CP please ? many thanks
September 7, 20214 yr 7 hours ago, rob0203 said: I have frame rate set to unlimited I keep so in P3D. The limits are in either RTSS or NCP. Best regards, Luis Hernández Main rig: self built, AMD Ryzen 7 5700X3D (with SMT off and CO -50 mV), 2x16 GB DDR4-3200 RAM, Nvidia RTX 5060Ti 16GB, 256 GB M.2 SSD (OS+apps) + 2x1 TB SATA III SSD (sims) + 1 TB 7200 rpm HDD (storage), ID-Cooling SE-224-XTS air cooler, Viewsonic VX2458-MHD 1920x1080@120-144 Hz (G-sync compatible), Windows 11. Running P3D v5.4 (with v4.5 scenery objects as an additional library, just in case), FSX-SE, MSFS2020, MSFS2024 and even FS9. XP11 and 12 installed, just for curiosity. Mobile rig: ASUS Zenbook UM425QA (AMD Ryzen 7 5800H APU @3.2 GHz and boost disabled, 1 TB M.2 SSD, 16 GB RAM, Windows 11 Pro). Running FS9 there for airliner ops. FSX-SE also installed, just in case. Lossless Scaling in al my rigs. What a godsend... VKB Gladiator NXT Premium Left + GNX THQ as primary controllers. Xbox Series X|S wireless controller as standby/mobile.
September 7, 20214 yr Author 6 hours ago, fluffyflops said: do you leave vsnyc on or off in CP please ? many thanks Off
September 7, 20214 yr 10 hours ago, Chapstick said: If you're on V5, try G-Sync on and VRR on in P3D (vsync and triple buffering off). Set the limit in CP to 36 (1/4 of 144hz). Leave your monitor at 144hz. Thank you @Chapstick. I've done as you suggested: In P3D Display VSync: Off Triple Buffering: unchecked Variable Refresh Rate: Checked Target frame rate: Unlimited In Nvidia Control Panel G-Sync: Enabled for windowed and full screen mode On Manage 3D settings and for P3D: Max Frame Rate: 36 FPS Monitor Technology: G-SYNC This resulted in a very smooth flying experience. I don't know why others say that P3D can't take advantage of G-sync. Maybe they were talking about an earlier version. Again, thank you. David dv Win 10 Pro || i7-8700K || 32GB || ASUS Z370-P MB || NVIDIA GeForce GTX 1080 Ti 11Gb || 2 960 PRO 1TB, 840 EVO My Files in the AVSIM Library
September 7, 20214 yr 4 hours ago, rob0203 said: Off Thanks. 4 hours ago, David Vega said: Thank you @Chapstick. I've done as you suggested: In P3D Display VSync: Off Triple Buffering: unchecked Variable Refresh Rate: Checked Target frame rate: Unlimited In Nvidia Control Panel G-Sync: Enabled for windowed and full screen mode On Manage 3D settings and for P3D: Max Frame Rate: 36 FPS Monitor Technology: G-SYNC This resulted in a very smooth flying experience. I don't know why others say that P3D can't take advantage of G-sync. Maybe they were talking about an earlier version. Again, thank you. David Thanks.
September 7, 20214 yr which nvidia driver are you guys on ? ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS 2TB 980 Pro , MSFS 2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO . Phanteks P600s Case ,TCL QM8B 50" 120 Hz TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack) Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons
September 7, 20214 yr are you guys ticking the "disable full screen optimisation" on the p3d.exe preferences ?
September 7, 20214 yr 25 minutes ago, fluffyflops said: are you guys ticking the "disable full screen optimisation" on the p3d.exe preferences ? Yes
September 7, 20214 yr yes ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS 2TB 980 Pro , MSFS 2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO . Phanteks P600s Case ,TCL QM8B 50" 120 Hz TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack) Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons
September 7, 20214 yr 22 hours ago, CaptKornDog said: Strangest thing I've seen recently - seems I need to find a way to force G-sync to prioritize P3D over all other programs to control refresh rate. i feel your pain, I also have the same issue as you. I have to have chaseplane, google crome, also psxseecon minimised otherwise or the gsync goes nuts. if you can find a way to "force G-sync to prioritize P3D over all other programs to control refresh rate." id be very interested too. thanks.
Archived
This topic is now archived and is closed to further replies.