FS2CREW: QUALITYWINGS 787

Problem: Where are the manuals? Solution: http://www.support.fs2crew.com/help/manuals/#pageid=quality_wings_787 Please read the manuals! Everything you need is in the manuals 🙂 Problem: Where is the FS2Crew Config Manager to enable FS2Crew? Solution: Unlike other FS2Crew's, this version of FS2Crew does not use a stand-alone Config Manager. You need to "enable" FS2Crew via the 787's LEFT FMC, not the right one. This is how the FS2Crew entries get added to the 787's panel.cfg file. After you've done that, you need to shutdown FSX/ P3D, then re-load FSX/P3D for the changes to take effect. This procedure is documente…

FS2Crew for the Quality Wings 787 has been released! If you've ever owned an FS2Crew before (which is everyone basically 🙂 ), use coupon code NEW787 to get 5 Euros off! Please taxi to our 787 product info page to download and purchase! This 787 version of FS2Crew supports FSX, P3D V4 and P3D V5! Important: You must have Service Pack 3 for the 787 from Quality Wings. Quality Wings released SP3 on May 20th, 2020. CHANGE LOG: To install: Login to your FS2Crew account, click "Completed Orders", re-download and re-install. You do not need to uninstall the previous version. …

787 Capts, Show your support FS2Crew and the Quality Wings 787! Get a forum banner here! http://www.support.fs2crew.com/help/manuals/default.aspx#pageid=quality_wings_787

My FS2C doesn't recognize vspeeds (in button control captain says 000 for all speed entries) and FO calls v1 at 110 knots even if they are in fmc FO doesn't also open the ECL after his preflight flow completed, but he does close it after preflight checklist completed

QW 787 is 1.4 Installed fs2crew and started receiving OOMs. Uninstalled FS2crew (bought at Flight1 3 days ago - should be latest?) to try a fresh install. After running fs2crew uninstaller I started FSX and pressed the N key. The main panel opened? How do I uninstall the correct way? Parenthetically I installed fs2crew and used revo to uninstall with the same result. It removed folders and reg entries. Specs: i5, 16gb ram, 3050 video (8gb) I also tried freeing memory while inside FSX - memory usage never got past 45%, same number as before OOMs began. Thank you in advance.

Have a logitech headphone usb connection. With the mike up and out of the way the interface connection is disconnected. Have to go into CFG and reconnect by first doing button control then back to voice interface and it does then reconnect. Used to not have to do this, not sure if this is a logitech update issue or something else. The headphones are working correctly and on startup with the mike up then put down the connection is there until I put them back up again. I do it when I don't need the mic and keep out any unnecessary background noises.

Hi Bryan, Is there a voice command available for having the Copilot select Speed Intervene for controlling the speed (IAS) on the MCP and if so what is it? I looked in the 787 FS2Crew manuals both installed with the product and online but could not see anything. thanks Mark

hi, According to the FS2Crew manual/tutorial for the QW787 for the Before Taxi Checklist after the flight controls check the FO asks about ground equipment and the PF is supposed to respond with "Removed" or "Clear" but I find there is no response to "Removed" and only saying "Clear" works in order to complete this specific checklist. Can you confirm that "Removed" is not an expected response or if this is a small bug?

Hi 🙂 for some reason the FO is not operating the ECL. i have not changed anything and it was working fine.. he does clicks buttons on the overhead and lower flaps down but he will not open the checklist and even if i open it he is not ticking anything. however he is closing it tried reinstalling both (cleaned all files) any solution to this problem? thank you very much

Hello, with the newest version of the QW787 and FS2Crew in P3Dv5, I always get a call "check your flaps" when trying to do the landing checklist, even though the flaps already are at 30. Best regards Adrian

I have the Voice button of fs2crew of late i have notice when using the button side of fs2crew it doesnt respond when i push the primary or secondary keys no response at all or move onto the next command. Im not sure whats going on.

Hi and thanks for an excellent product. Unfortunately I have some issues after updating QW to 1.4. I uninstalled fs2crew and downloaded fs2 crew again, but some features do not work. Fs2 crew would not set flaps, V1, V2 and Vr speeds are set two 000 and it is not possible to complete landing checklist etc. With regards Thor H

Just a Question for FS2CREW for the 787. When the co-pilot does his checks he turns off the right circulated fan and leave the other three alone. Is there a reason behind why he does this, as i got to turn around and turn it back on. Can someone explain this to me please. (Not a real life polit)

Hello all, I'm trying to use FS2Crew with button control in my QW787. My problem is, that I can't find clear instructions when to use the main button and when to use the secondary button. I went through the tutorials now for the 3rd time and gave it up after messing up the sequence. This time when at t+30 the FA asked me if ready to start boarding and I pressed the main button to find myself in the before start procedure. I had no chance to know that the secondary button was the right one... Best wishes, Rainer

Hi wanted to ask if the 787 version works with the new service pack thank you

Hello guys! Reading from some other posts, I understand it should be possible to actually access the loadsheet, when it’s delivered during ‘preflight events’. How is this actually done? Both via in-person delivery or ACARS? How do I ‘get to it’? Thank you in advance. B787 Driver

Hi; I just (25th Oct) purchased and installed FS2Crew which installed ok no issues. I loaded FSX selected QW787 and enabled FS2Crew and saved the config however, when I exited FSX it encountered an "unexpected error" and restarted nothing was saved. Tried it a few times enabling and disabling FS2Crew in the config menu and same issue. I decided to try something else. Ran FSX and selected QW787 this time I said "NO" to run "FS2Crew787QW32.GAU" and the FSX exited normally (didn't crash), obviously FS2Crew didn't run and nothing got saved. I tried a few variations and everything seems to point back to the .GAU not execution properly. i guess on exit it's tryi…

Hi Bryan, Hope your keeping well,just a quick idea for a future update.With the running the pre flight events the two options are domestic or international,i cant think of may 787 that are used on domestic routes.The idea is to change them to meduim haul or long haul,think it will just make it a little more realistic. With Thanks Gary Jones.

Hi Bryan, Hope your keeping well, nothing major just inquiring if there are any plans to change the FA safety announcement that refers to the upper deck With Thanks, Gary..

Hello, I have an issue with FS2CREW for the QW787 using voice control; the issue is that the FO won't execute any actions after the preflight checklist has been completed. All previous actions are performed fine, all my commands are being executed until I command the FO to execute the Before start procedure, from this point on the FO does not execute any actions anymore, neither any previous items like the preflight checklist. The system is however continuously picking up my voice commands perfectly (I can see commands in green bar). It almost seems like the FO went on a walkaround between preflight checklist and before start procedure and never returns again (I ha…

Hi, I am using Prepar3d V4, I have just purchased the Quality wings 787 today, installed it, followed instruction, and I am unable to select it in my library, as if it was never installed. How can I correct this? Thank you very much

The brake button on my joystick,#1 button works before take off, after landing no longer works only the rudder pedals. Makes for difficult taxi and parking at gate, not impossible of course. Does FS2 disable the button, didn't happen before.

Hi Bryan, Hope your keeping well.I am slowly transitioning to P3Dv4.5 from FSXSE and my latest purchase was the QW787. I set up a flight from LPPT to EGLL in the 787 frame rates on the ground where between 40 and 50,opened the FS2 crew panel and bang dropped straight down to 15 and wouldnt go any higher,closed the panel and back up to 40/50. After turning settings etc down in P3D still no help no navigraph charts and single monitor,so i exited P3D and unticked the HD displays in the QW dispatcher. Started P3D again same airports and opened up the panel and no frame rate drop.Just to let anyone know who may experience the same issue. …

Hey there, the fs2crew- activation via fmc doesnt work for me. No amber light, switching the button is not functional. Whats the way to make an manual entry for activation? Thanks for your help. Stefan

Good day Bryan thanks for the new software. Is there anyway to make the voices sound with more bass. I find that the voices are sharp and it sounds like they’re in a tin can or something. Thanks