FA50 EX FSX | P3D

Hello.... i just bought Carenado Falcon 50 today but cant flight with they navigation system because too poor.. i send msg to Ramon but he doesnt answer, so someone could please send me the mod for i can fly with this fantastic bird...

I'm reworking the panel to integrate a GTN750, this is a WIP. There is much to be done (PFD, AP, APU, FMS, Aircraft.cfg & FLTINFO Gauge) Will also fix some FMS errors so people can choose to fly GTN or FMS Linked pics are not hi res. I'm back at work and IMHO not ready yet to share. (Please give me a few days) Thanks

Does it come with a Lite version for a better frame rate ? Couldn't get a single reply on my previous post enquiring about frame rates or stutters. Makes it hard to decide as to whether to buy Carenado's latest and expensive (for Carenado) offering. Cheers

Question to those guys using Falcon50 with RamonB´s GTN mod. Is one willing to send me the mod, because RamonB does not react to my email request for that file. Thank you Peter

Anyone else who got this problem when the aircraft is passing FL160 and up, the fps drops dramaticly from 50-60 fps down to 15-20 fps until descend and under FL160 everything suddenly go back to high fps just like that? I've reinstalled the FA50, tried with older Nvidia drivers but nothing helps and this problem started recently. The Cessna 560XLS had the same problem but it went better after reinstalling. I use RXP GTN on both aircrafts. Other planes like the PMDG 737 or Aerosoft Airbus series doesn't act like that when flying. Even the Beech Premier stays ok with the RXP GTN addon during the whole flight.

Hello, I just wanted to give you my opinion about this aircraft I bought two weeks ago. I did about 25-30 flight with it... And sorry, but carenado really did a very very poor add-on !! I have nothing to say about the textures, they're perfect, but the navigation is just horrible !!! I noticed a lot of problems, they are not all listed but here are the major ones : ● The DCT function don't work properly. The plane will turn to align itself on the route between the chosen point and the previous point. It looks exactly like the basic GPS, it's not realistic at all. ● When you want to do a direct, the wayepoint at the top of the page is hidden by dashes, …

I am trying to run the F50 in P3DV4.5 and this is what I get when displaying the Virtual Cockpit....anyone have any idea of what is going on here. Other Carenado planes work OK? https://www.flickr.com/photos/189610751@N08/shares/75Bvf7 I had a hell of a time trying to get a picture in here....don't know if the link will work or not.

Could someone explain to me how to do an ILS approach in the FA50 EX for FSX? I'm familiar with ILS in other aircraft, to include Boeing systems. But I'm having trouble finding information on ILS in this model.

Loud warning sound ... clicking sound ..... I can't identify what the problem is, so I can' t stop it .... has anyone else encountered it ?

I am new to the carenado falcon 50. I have been able to program the FMC without any issues. In todays flight I made it all the way to the final airport for landing. I set the NAV radio to the correct freq. for the ILS approach. The signal was received. However when I press the APPR button, it does not turn on (engage). Also was unable to set the CRS, but I assume that is because I can't figure out how to select the APPR function. What might I be missing? Thanks, Jim

Hey guys, Just a quick one, is there a way to change the fuel and weight units over to Kg's instead of Lb's? I can't seem to find a way to do it. It's alien for a British pilot to work in Lb's! Thanks in advance Sean

Hi, gents! At FL450 I have this annouing sound CABIN! CABIN! CABIN!...non-stop. I do not know how to turn it off or that to do to silence it. Help me, please. Here is an Overhead and Panel screenshots of this flight https://prnt.sc/m7ge0u https://prnt.sc/m7gec2

Hi All: Does anyone have a good fix for the mow famous Navigraph-related very low FPS? After the latest install of the Falcon I am getting frame rates at start up below 1. I have googled it and checked the Carenado support page and cannot find anything definitive that works. Thoughts? Thanks Rick

So far my flights with the Falcon are going well with the exception of the waypoints sequencing display in the MFD. The AP track the entered flight plan but the waypoints sequencing display in the top of the MFD is most of the time lagging and does not reflect the WPT's still to go. So, there is a discrepancy between the flight plan in the FMS and the MFD. My installation might be corrupted but before to do a full re-install I wanted to know if this issue has been already adressed. Thanks Jean Pierre

Greetings Fellow Falcon50 EX-ers!! I am looking for good examples of where one might set the Bearing source different from the Nav source. I am currently setting both as the "GPS " Or "VOR1" ( For ILS approaches). I could use some help understanding the difference between the two. In G1000 cockpits for example( Phenom300) , I can set NAV1 and NAV 2 and see the "Green single arrow" or "Green double arrow" on the PFD and use it as guidance from nearby VORs and STiILL be flying in GPS mode ( magenta) So what is the Bearing source in FA50ex and how do i use it properly? best regards Hari

The default lighting is great but just thought it was a bit bright so I made this with FSLSpotlights the Ambient blue is a separate set of lights so It can be turned on and off

Hello the Shift keys for the popup windows dont work for that plane, Any advice?

Just bought this bird and I probably shouldn't have, but it looked so nice. I have the standard AP/FMS issues with the Phenom 300, and I should have stayed away. Anyways, I bought this the other day and have been unable to fly it since. I have Track IR, and the first crash happened when I turned my head too quick. The game crashed out and I had a "your computer ran out of memory" error. I have 32 GB of RAM, and while I understand something about FSX maxes the vram out at 4gbs, I have not had any other issues with any other planes. I am running with ORBX scenery (Global, Vector, North America, NA Alaska/Canada, and Lights, along with the freeware Airports, lib…

Hey everyone, Perhaps this issue has been talked about, but I'm not seeing anything in this forum related to Flight Plan importing. I use SimBrief to create all of my flight plans. I have a .PLN file exported to use with P3D, but can't figure out how to import that data into the FMS built into the Carenado FA 50 EX. Is there any way to do this, or am I going to have to manually enter the flight plan information?

Hi all: I have noticed that the cockpit flood light does not seem to be working on my system, FSX Gold Boxed. When I click the button or the knob the floodlight flashes and everything is illuminated for a second, then the illumination disappears although the light fixture looks to be on. Anyone else? Thanks Rick

Hi Ramon I STILL can't not pop out the panel. As indicated below I think that I followed RAMON procedures but may be I am not doing the right thing to get the panel to come up. I GET THE MDF PANEL LOCATION BLACK. --WHEN I CLICK ON THE MDF TEMPLATE SIDE KEYS ...THE MDF SCREEN REMAINS BLACK, SAME WHEN I DO IT ON THE VEHICLE-KEYBOARD-INSTRUMENT PANEL .I ALSO TRY TO CLICK ON THE MDF BEZEL BUT ALL I GET IS THE FMS ON THE SIDE I ALSO TRIED BOTH 'AIRCRAFT.CFG' THE ORIGINAL ONE AND THE ONE THAT CAME ON THE ZIP DOWNLOAD BUT AFTER THE REQUIRED CHANGES ...STILL THE SAME PROBLEM...BLACK MDF PANEL. ANY IDEAS OR SUGGESTIONS WILL BE VERY MUCH …

Hi, happy With this airplane. Lots of good stuff, but if you compare it With pmdg you will get dissapointet. It cost 1/3 of pmdg Aircrafts(t7), so you should know there will be some bugs…. After Reading manual and some trying, i am now able to perform a realistic flight. Dont make to early complaints about a Product, if you havent tried to learn it from the start.... Happy flghts, B

As you might already be familiar with from the other aircraft, in this thread I'll be presenting my work on the Falcon. All repaints can be downloaded at https://edrm-repaints.com/aircraft.php?id=fa50. Before that I just gotta complain about this developer again, though. Their ignorance toward the repainting community is just staggering. The Falcon is a prime example of this again. Not just turns a straight line on the texture into a shaky one as smooth as the surface of the Pacific Ocean on a windy day when viewed in sim (we're accustomed to that by now), but they have seriously mapped both outbord engines to one piece of texture! This is a new height of incompete…

A few I'm painting: jk7693 by JanKees Blom, on Flickr jk8290 by JanKees Blom, on Flickr jk8268 by JanKees Blom, on Flickr but the distortions are driving me nuts, so don't count on many more...

I wonder if anyone else has experienced a problem with the ADF selector? I use the adjacent LSK key to highlight the ADF frequency and the outer knob to highlight the individual digit but the inner knob will not change the number. These knobs however work fine for selecting the numbers for the COM/NAV frequencies but just won't do it for the ADF. I have redownloaded and reinstalled the Falcon 50 in case the installation/download was corrupt but the issue persists. I know as an ADF user I'm a bit of a dinosaur but I sometimes like the challenge ADF navigation can provide! Bill