RXP General Forum

It is now 22:30 CET Feb. 27 2024 and RealityXP still not updating GTN 750 for P3D v6.1 Patch 3 (6.1.11).

Since Feb. 14 still waiting for an update to RealityXP 750/650 (FltSim) 2.7.8, which as almost always happens with a new update to Prepar3D V6.

How do I go back to the IAF (initial approach fix) using the FPL in the GNS?

Using LNM's "Multiexport Flight Plan Options..." facility I saved an .FPL file in the "C:\ProgramData\Garmin\GNS Trainer Data\GNS" folder. I then successfully imported it in GNS 530, but the flight plan does not show up in the FPL menu or in the NAV screen. What am I missing?

Hi im using FSX and carenado Pa31 Navajo and to use the GPS command I programmed my Honeycomb Bravo buttons and it works well. now I installed the RXP gns530 and it works well but I’m not able to use my Bravo buttons. i did read the manual and they mention to go in Settings Panel / use gps simulator command. problem is that I can’t find that menu. they also mention to hold the shift key and right click on the gps device edge to open the menu but I only get the window to undock or lock window.. any idea? Paul

Looks like Little Navmap can export flight plans to the GNS. Is there another source for aircraft performance profiles for P3D? The one at the Little Navmap website has only a few available. Thank you.

I own both the RXP GNS750 for FSX/P3D as well as the X-Plane 11 & 12 versions, bought them a long time ago. I recently had my hard drive fail where I had the installers for them so I lost them. Until now I've always used those original installers or an update file I had laying around to reinstall. Now I lost all those and I cannot find where to download them from. I checked the website and I don't see a way to download it anywhere. I would greatly appreciate some help. Please can someone tell me where to get the installers? Thanks

For the last 24 hours I've tried repeatedly unsuccessfully to make a purchase. This is a disturbing product. (1) there is no contact available if you have any issue. (2) it took me hours to figure out how to download their installer and then more hours in order to get "the coupon" (3) then you have to sign up, it will NOT accept any password combination I provide. (4) It seemed to take over my computer, insisting that I log into Windows 10 in my computer and then had to use the MSN hotmail. and even then, i still cannot get to make a purchase. Did the developers ever attempt to make a purcahse on their own site? Thanks to Re…

Hi I am new to X-Plane and I am interested in upgrading the panel on the Cessna 172 with a GTN 650. I would like to know if the Reality XP GTN 650 software is compatible with Mac computers. Thank you.

On 26 September 2021, I attempted to purchase Reality XP Garmin GTN750/650 bundled Coupon for 50% special discount (for me, Reality XP P3dv5, XP GTN 750/GTN 650, 50%. The Flight1 E-Commerce site rejected the coupon because I did not have an Order Number and I couldn't get an Order Number without the purchase, so I purchased the GTN 750 without the coupon, I was given an Order Number but not the 50% discount. I then purchased the 2nd bundle product, Reality XP GTN 650, I provided the Order Number for the Reality GTN 750 and received the 50% discount for the GTN 650 BUT not GTN 750 already purchased. Remember, I had the bundle coupon but Flight 1 E-Commerce rejected it w…

Hi, I fly two aircraft. 1. Flysimware F50 which locks onto the RXP GTN 750 course without fail. My other aircraft is the Carenado B120 which used to behave exactly as the F50. Following problems unrelated to either Carenado nor RXP, I've had to do some uninstalling/re-installing. Now, the B120 heads over to the GPS course as before, but then turns onto a reciprocal heading and proceeds in exactly the opposite direction. I'm an old guy who now likes an easy aircraft to fly, hence the liking for this particular B120. Since it behaved well in the past, I'm puzzled as to why this behaviour makes it useless for me now. I'm hoping for help here, as I woudn'…

Having switched off the local firewall etc, tested the server connection, creating a Flight1 account and entering my details I was unable to get a Paypal screen to pop. Tried 3 different browsers...same. So I used a credit card which popped a screen saying connecting to server and then immediately disappeared so I was unable to read anything else. I'm now present with the Click Here For Secure Purchase button again.....which I don't want to press in case I get billed twice. Anyone else had something similar? All suggestions welcomed.

Hi , Assuming that your incoming G600/G500 gauge will also use the Garmin trainer as a base , will it have the SVT function implemented ? if so that would be the perfect training solution coupled with your GTN , also do you have a shedule for the release ? thanks a lot .

I did not see any replies if you have a license for use on an AATD. We are a non-profit building an AATD and would like a commercial license for use with our Realsimgear GTN 650. Thanks for any reply. Rob

I have updated my computer from Windows 10 Pro to Windows 11 Pro by doing a clean install. After going through all the trouble researching, downloading, ticket-submitting, etc. I was finally able to get RXP's GTN 750 to work, but... I must have missed a step because the smaller 625, 635 and 650 choices in the plugin dropdown are now greyed out. The 750 is fine. the smaller navigator is greyed out. They used to work fine... What did I miss. Thanks a lot,

Hi, am wondering if anyone has a panel.cfg which has the Reality XP GNS 750 (FSX) integrated into the Just Flight C152 aircraft's Virtual Cockpit? There is no 2D cockpit with this aircraft. I am using the Just Flight C152 in FSX Accelerator and I have purchased and installed both the Just FLight C152 and the Reality XP GNS 750 but I only have the knowledge to set the Reality XP GNS 750 as a pop-up window, I would love to see it within the Virtual cockpit setup of this aircraft. Any Help much appreciated. Kind Regards

Hi I am having real difficulties installing the Reality XP GNS 750 on to my Windows 7 operating system computer. The issue seems to be will windows. Net framework. I have disabled my McAfee firewall and real time scanning while trying to carry out the installation but it is suggesting that the installation is not compatible with Net.Framwork version 4.5.2. I searched for this component in order to de-install it but it is not on my system, it goes under the name of Windows KB(2828152). Next, I de-installed the Net.Framwork 4.8 and restarted the computer then the Garmin Trainer installer asked for it to installed as it was needed, this was done, however, the…

Hello, How can I avoid errors detected? After A2A C182 startup the following unrecoverable error detected: 23/08/05 19:01:44.632 15240 - ] # rxpGnsSim64.dll version 2.4.23.0 23/08/05 19:01:44.632 15240 INFO ] 23/08/05 19:01:45.367 15240 INFO ] using: C:\ProgramData\Reality XP\Common\GnsTrainer\dbfiles\worldwide.bin 23/08/05 19:01:45.403 15240 INFO ] using: C:\ProgramData\Reality XP\Common\GnsTrainer\dbfiles\worldwide.bin 23/08/05 19:01:45.416 11580 INFO ] G530.1 - TRAINER 3300 23/08/05 19:01:45.418 11580 INFO ] C:\Program Files (x86)\Garmin\GNS Trainer\GNS\G530SIM.exe 23/08/05 19:01:45.420 11580 INFO ] C:\ProgramData\G…

Solved. Suricata was blocking the connection.

Hi This is an inquiry about the GTN 750 model I want to apply this model to my own development simulation, not to simulation like P3D or XPLANE, do you provide SDK or API? Thanks for your help :)

Hi, I have tried to reach out through the website but seems like the form is not working unfortunately. Is that possible to let me know the commercial licence for gtn750 for xplane? We will be building a basic simulator that we may rent it out to pilots to practice, and we are thinking gtn750 would be a good solution for gps requirements. Many thanks

Reality XP home page states "Now compatible with Prepar3D v6 and X-Plane 12". How does one go about getting the now compatible version?

After loading RXP in P3D v5.4 Windows 10 Pro successfully, I clicked the window to selection an aircraft. I placed the 530 on the windshield to the left. I click OK and what came up was the 530 with the entire Garmin 295 superimposed on the 530's screen in its entirety and an error message: F1GNS Error Incompatible 64-bit simulator version I don't know why this has happened since the install went perfectly? What did I do wrong, something missing or is P3D v5.4 incompatible with Reality XP. When you chose the P3D version in XP, there are no subdivisions to select. For example…

"A monitor program has been found running in your system. Please, unload it from memory and restart your system." What monitor system? Where is it located? How to fix this?

I'm addressing the manufacturer! After replacing my SSD and installing XPLANE 11, I discovered that the GNS 530 software manufacturer had banned me, believing that I was using a pirated version. I had to reinstall the software after downloading it from my Flight 1 account. I've tried to install and reinstall it several times, and although the plugin is visible, the GNS 530 screen remains black when executed. What is the solution to remedy this, thank you.