C90 GTX King Air HD Series for FSX | P3D

Is there somewhere I can find the Climb settings for this bird? The performance tables give you the Cruise settings but there aren't any for the Climb. I'm looking for either exact RPM & Torque/ITT numbers or a range of numbers to use. I've only managed to complete one full flight and that was because it was only about 25 miles and I leveled off around 4,000 feet. All of my other flights, I'm losing an engine before I get to 10,000 feet, and I'm pulling power back, and nothing is Red or in the Red.

Hi, I am looking at buying this plane and I just want to know if it’s working well in P3D v5.3? Pierre

I purchased the Carenado King Air GTX and each time I do a flight the batteries go dead. The generators are working as expected. If you shut down you cannot restart due to dead batteries.

Think this plane is pretty well done! Enjoying it! Anybody going to take the plunge of getting the Flt 1 GTN 750 to work with it? They would work well together... Thanks in advance. Its a great bird!

I have made some modifications to the C90GTX. See description below. PM me for a link if you would like to try it. Also include an email address for subsequent updates. V1.0 (Dec 22, 2017) Changes: 1. Added TO/GA button to VC autopilot panel. 2. FDE changes to reduce abruptness in flight controls and power levers. 3. Updated engine start sequence with XMLTools. 4. Contact point changes. 5. Upgraded performance to match factory C90GTX. 6. Corrected AUTOFEATHER arming function. 7. Corrected starter/generator logic. 8. Reduced instrument panel glare at night. 9. Added Raymar's clickspots to EFIS bezel (same as Cessna CJ2 but not marked…

I've just got myself a copy of this one and the King Air, but have some issues. For some reason the frame rate cuts right back to about 1 and the building database starts at around 12% and slowly creeps to about 16% after a very long time.

Hello, my Gear horn silence button does not work and even with the gear down it does not stop. Some can help me with this issue? Thanks.

Hi all, I am not hearing any click sounds when I flip switches. Is this just me? Thanks, Bill

Hello all, Can anyway direct me to the switch that turns on the Secondary HSI on the C90? On the Hawker 850, the switch is underneath it from memory, but nothing on the C90? Thank you!

Hello...I'm trying to figure out how to work the avionics on the C90 GTX. I also have the Saitek ProFlight controls and radio panels. I finally figured out how select and enter the VOR 1 frequency on the main panel display but I can't get the ILS panel (the small one in the cockpit middle) to work. The ADF frequency is also very cumbersome to set and I don't see any ADF bearing display. The HSI compass settings also don't seem to work right -- if you ROSE to ARC you can't go back to ROSE. Also, how do you get the flight plan entry to work? The manuals are some help but the programmers don't seem to have implemented everything properly. If you know how to use this s…

Hi, Is the weather radar actually functional in the C90 GTX (and the B200)? If so, does it need to use any special weather engine, such as Active Sky? I use Opus FSX for P3DV3 and Rex Sky Force for weather in P3DV4, but can not get the weather radar to function in the C90 GTX or the B200. In the C90 GTX I have tried all map formats, all ranges, checked the CMeteoXml.dll is present and in the dll.xml file, but still no luck with weather. Cheers,

Hi Dear Guys, Planning to purchase the GTX for FSX. Before my final decision I would have some questions: 1. With the modifications by the talented "whamil77", what about the turboprop engine behaviour? Is it close to real, I mean you have to gradulally increase throttle during climb untill reaching ITT limit? Or it is still the incorrect basic FSX stuff? (If somebody would send me a picture taken during cruise around FL 220-240 I could check the engine indications.) 2. How close are the performance numbers to RW? 3. Is whamil77 mods are for FSX, too? 3. Any other personal opinion. 4. Sytems modelling? As you can see from my quest…

Hi,everyone! I just installed the C90 GTX to my new P3D V4. But when I want to play it. The game stopped working and I don't know the reason. I have FSX:SE in my computer with a C90GTX installed too. Is that the reason?

Hi, I've just installed Carenado - C90 GTX King Air HD v1.2, and when I run the airplane... Navigraph database never load. I always see a 0% and consequently the FMC don't work, they always display loading database. Why is this happening? Cheers

I have the latest version of 3Dv4. I downloaded the Carenado C90 GTX and F406 HD. Both are transparent from the inside out. You can see the instruments and the tarmac at the same time. Should a new release do that? I bought the Carenado DO228 at the same time it works great. The stock aircraft are fine. My Aerosoft Twin Otter is fine.

I had the old Carenado C90 and was wondering if the add-on paints from this aircraft will work on the C90GTX King Air FSX. I have put in Bert's MOD for the GTN750 and have been having fun flying it around. Personally I am not a big fan of the Pro Line 21 and the FMS. Thanks Bigsky10

So I bought this aircraft this morning and things did not go well. Install went seemingly smoothly but when I loaded the aircraft a dialogue box appeared Carenado/Navigraph labels and told me it would take some "minutes" to build the database. 4 hours later with the status bar at 75%, Windows 7 Pro crashed. So I uninstalled the C90 GTX and reinstalled using the tip in another thread concerning the radio button and browsing to the install location. So all went seemingly ok again and this time the dreaded dialogue box was not in evidence and the aircraft seemingly loaded ok but with frame rates of 0.5-1.0. Not good. So I exited the sim and checked the properties/security ch…

Hello,, wondering if someone can help me on this. During pre-flight prep, I've got both engines at N1 up in the 70s. After takeoff, while climbing, the N1 starts to drop rapidly, and it feels like I'm losing power. My altitude starts dropping, and things start slipping away. I'm sure I'm missing something with the engine configuration, but looking thru the Carenado docs, I'm not finding anything, nor where my mistake might be. Thoughts? Ideas? Are there are good startup/flight checklists out there for the GTX? I've located one for the C90B, but not certain if it applies. Any help surely appreciated. Mike

Just curious to hear if anyone has the Carenado C90 GTX (BE1100Xv1.2) working in P3D4 (Hotfix 1). I've got mine installed into \Documents\Prepar3D v4 Add-ons\Carenado. Everything seems to work fine except the Navigation Data never loads. It's always at 0%. I have checked Carenado support for a solution, but I haven't found the fix yet. I'm on a Windows 10 PC, i7 @ 3.6 ghz, GTX 970, 32 GB RAM. If I have left any info out, please let me know. Any advise would be greatly appreciated. Thanks, Steve

I'm currently using the C-90HD with GTN 750 installed. All is fine except I receive no navigation sounds from VOR, and Loc. Thiis the only aircraft I have experienced this problem with. Others with same installs work fine. All sound settings are ok. Has me beat. Any suggestions welcomed. Bob

Hi! Does anybody know if it`s possible to, while enroute, read the total distance remaining of the flight plan in the Carenado C90 Gtx`s FMS? I can see on one of the perf pages the total distance, but that doesn`t change during flight. I also know I can get a resyme of the next 3 or 4 waypoints on the middle flight instrument display, but I would like to see the remaining distance to the destination. I can of course calculate it on my own, but would have thought this is a standard feature in the FMS... Regards J

Where can I find some for use with P3dV4? Many thanks. Dave

Hi ,I was wondering if it's possible to save and or load flight plans into the mfd on this aircraft .I have tried to save a flight in progress ,only to load it later and find the mfd blank and no way of saving or loading flight plans . Any help is much appreciated .

The v4 installer for the C90GTX is up on the Carenado site.

One thing I've noticed about both FSX (and P3D also) is how outdated the airport and navigation data are -- for example Coronado Airport (K4AC) in Albuquerque is long gone and the Sunport (KABQ) no longer has Rwy 35/17, Double Eagle (KAEG) now has a control tower, radio frequencies have changed, and so on. I've used this to update nav data in FSX/P3D https://www.aero.sors.fr/navaids3.html Here's my question. Some aircraft have appear to have nav instrumentation problems (VORs out of position, radials misoriented) and some don't. Which data actually come with an aircraft (like the Carenado version of the C90GTX) and what does not? What's the best way to m…