777 Immersion Support

I try to install 777 immersion. When I click direct install I found " You need to have at least one compatible simulator installed to use this product" My sim P3D v.4, I have FSUIPC v.5 full version register complete . help me please

Hello all After reinstalling p3d, I obviously couldn't do without the package of the 777. I noticed now that, even with the stock theme from fsfx, I don't get any volumetric light. Any tips on what might be the problem? Vkr Victor

Hello Guys, as i am owning a 777 Homecockpit and before flew the PMDG 777, i wanted to check if the 777 Immersion is possible to install also with other AC? It asks me to install PMDG before it is able to install it into the SIM. Greetins

Hi Guys, I have made a new installation of my FSXSE and no I'm missing some Volumetric lights in my PMDG 777 after installing Immersion Pack I can't see the landing, Runway, Taxi and Winglights in my FSX All other effects e.g Beacon, strobes etc are ok Dx10Scenery Fixer have no effect I can see the missing lights for one second not more... Where is the mistake??? Thanks for your help guys...

i installed it ,but the effects seems doesn't work.But for my precipitfx,it works

Hello, today I noticed a strange effect that produced odd square on the ground. I'll attach a picture that explain the issue. I hope someone can help me, thx! N.B. I have this issue only with this package. Best, Giacomo

hi bought both Immersion and Precipitfx see that it add's a lot of effects files in the sim but i see nothing in the simulator a friend that bought it says that it must change also the smokesystem of the cfg but in mine it has nothing changed any help? thanks

Hi all I have purchased ChasePlane, PrecipitFX and 777 Immersion (PMDG) last night and I am happy with the result of ChasePlane and PrecipitFX. However 777 Immersion is not working, here is the list my system config and what I have done. Graphic card: Ati HD6970M (Driver updated to the newest version) System: Prepar3D 3.4.14 Add-on PMDG 777 Active Sky Next 2016 FTX Global & Vector REX 4 Textures & Cloud REX World Airport PrecipitFX ChasePlane FS2Crew I have tried: 1) Update / reinstall graphic card driver 2) Set the Special effect to medium / high 3) Reinstall FSUIPC 4.959 4) Tried in different weather 5) Reinstall 777 immersion …

PMDG 777-300ER Im on FL350 Close to OMDB MACH .850 and GS 573. when i look on the wings i have a Condensation effect!? It say i have a patch installed for this issue reales date Feb 23, 2016.

Hi, i just want to say that using my Immersion in the T7 makes my SLI jump from 60% to 85-90% in external view over desert and without clouds in FL360. Looking in the direction of the rear makes it jumb. Using as always only 4XMSAA inside P3D. I never noticed this perfermance issue with other versions. Driver is 353.30 Thanks Michael Moe w10 64bit 2 x GTX 970 in SLI

Hi The 777 immersion user manual states that in order for effects to appear the engines need to be turned on. For most of the effects yes i understand. However, Does this mean that if my engines are off and the aircraft is parked at a gate the raindrops effect will not work even if the wx is rainy outside or is there any exception to just this effect? Checking on this as i experienced the same where i did not see any raindrops effect while parked at the gate and engines were shut off. Hope someone could help Thanks

The following failure dialog suggests I contact support... "Stripe error: Your card was declined." Let me know the solution either via forum reply or by email. This order is for the Triple 7 Immersion package. Thanks, Keith 1085341

This is by far the most convoluted and uneccessarily complex install i have ever seen. When I try to install I get "ERROR Could not extract file! VFXCentral.exe" when the file has ALREADY been extracted and of course you have no live support no phone number and no live support just a cop-out forum i did not pay you to wade through a forum FIX the PRODUCT I down loaded the file 5 times and unzipped 5 time with the same result

Hi there been enjoying your product for while, however i have been getting random incidents were the contrails split up vertically some going up and some going down. Havent been able to find any help on the forum.

I have just purchased the 777 immersion package and I have noticed that all the effects for the engines are reversed. If I throttle up the just left engine, the jet wash, vortex and condensation effects appear for the right engine (which is at idle). If I throttle up just the right engine then the left engine displays all the effects. I have PrecipitFX and the 737 immersion package also installed and I checked on the 737 and the effects on that aircraft appear correctly and not reversed.

THe VFX center is telling me that FSUIPC is not installed properly. I have removed and reinstalled so much that i dont know whats what but i am still getting the error message saying that it is not installed properly. Is there a possiblity of teamviewer or something because everything was fine before today.

Hello, I have a problem with my 777 immersion product. For example, while on cruise, I can see the contrails from the package but also the default one. Is there any possibility to completely remove the old effects to apply the newest? Thanks and good flights!

Hi, I have a problem with FSX with 777 immersion Jan 20,2016 updates , I got no wing condensation/engine condensation after installing VFX Central, every thing was working fine before. Many Thanks.

Hi Keven, I am not sure how to determine whether the program is running. I have started the PMDG 777-300ER engines on the active runway, so had expected to be able to start 777 Immersion. If I start it, I cannot see it in the Windows 10 Task Manager. If I restart it, I receive the error message 'Application cannot be started. Contact the application vendor. The .log file I receive contains the text 'Error creating the Web Proxy specified in the 'system.net/defaultProxy' configuration section. The requested service provider could not be loaded or initialized.' I am running .NET Framework MVC 4 Runtime version 4.0.40804.0 Any ideas?

I have special effects settings to high, and I have uninstalled and reinstalled with no luck. Thank you.

Hello all Whenever I'm on the ground and it's raining in my sim, this problem occurs where raindrops fall from my aircraft but they glow black and I don't know if it's supposed to be like this, I've only ever had this problem when using the 777 immersion package, if anyone could help. It would be much appreciated. - James Here's a screenshot of what the problem is below

Good day, noticed that when i taxi in wet weather with the T7, the wet tire tracks don't linger like they do on the 737. You don't see the wet tire marks for a distance behind the plane as you taxi. Is this something that would be update to match the NGX? Besides that, great products. Hopefully when the 74 Big Bird comes out, there would be an immersion for that.

Hello FSFX, I'm not sure if this is an immersion issue - P3D issue - or even a scenery issue....Or heck! it may not even be an issue at all (LOL!) Is this the way the lights are supposed to look? I think it looks kind of wrong....Are they suppose to be illuminating the ground? First 20 seconds of the video & then on rotate, have a look at my landing/runway turnoff lights Pointers?

Sorry for the poor video quality. My right contrail always flashes creating very unplesant effect for my eyes. Also I get this vertical line that moves pretty fast. I tried DX10 fixer and no difference. Anybody got any idea what to do with it? It's pretty ugly so to speak :( https://www.youtube.com/watch?v=YopTaRD8HLI&feature=youtu.be

When starting the right engine, both the runway turnoff lights briefly flash. I recently reinstalled the 777 with the new update and confirmed without 777 immersion installed it does not flash. As soon as I reinstalled 777 immersion, the flash during start came back. Only seems to happen when starting the right engine.