777 Immersion Support Latest Topicshttps://dev.avsim.com/forums/forum/729-777-immersion-support/777 Immersion Support Latest TopicsenImmersion Manager not working....https://dev.avsim.com/forums/topic/614249-immersion-manager-not-working/ Hello guys, I apologize if the topic already was brought up, I just need help getting access to my Immersion Manger for the T7. It starts when I click it, prompting to run as administrator, when I click yes, an airplane icon shows up on the icon tray and would disappear when i would try to click on it. I verified the files from Orbx and reinstalled multiple times, I even submitted a ticket, unfortunately they won't get back to me until Monday and by then the wife would be home. If anyone can help or put me in the right "heading" I'll greatly appreciate it.

]]>614249Sat, 29 Jan 2022 22:20:11 +0000777 immersionhttps://dev.avsim.com/forums/topic/608206-777-immersion/ Hi recently I buy the 777 from immersion, but I dont find it in game, when I go to add-ons It appears but I dont find un vehicles

 

plz help me 

]]>608206Sun, 03 Oct 2021 15:50:03 +0000777 Immersion V2 for previous customers?https://dev.avsim.com/forums/topic/600287-777-immersion-v2-for-previous-customers/ Hi,

Thank you for bringing the 777 Immersion to P3Dv5. However I don't see any option for previous owners to use this update. What is the upgrade path ?

]]>600287Tue, 11 May 2021 16:20:13 +0000Set of immersion and default contrailshttps://dev.avsim.com/forums/topic/556258-set-of-immersion-and-default-contrails/ Hello. I think I've got both contrails. In the center of back part of contrails there are flat contrails as seen in the photo.

03862351e3a6da7808f54830752d82be9bcce6ae

]]>556258Tue, 25 Jun 2019 10:00:37 +0000Unable to find PMDG 777https://dev.avsim.com/forums/topic/462035-unable-to-find-pmdg-777/After clean installation of Prepar3d V2.5 and PMDG 777, then there is pop-up said "Unable to Find PMDG 777". PMDG 777 fly flawlessly on my P3D V2.5 and cannot understand why it unable to detect. Hopefully some tweak and trick from all you guys as I'm hate to start install all over again...

 

 

Thanks

]]>462035Thu, 12 Feb 2015 13:55:26 +0000Disconnected...Load the simulator with a supported aircraft.https://dev.avsim.com/forums/topic/543923-disconnectedload-the-simulator-with-a-supported-aircraft/ Hi,

I have the immersion packs for the PMDG 737,747 and 777 and when I check the addons Immersion it says Disconnected....Load the simulator with a supported aircraft.

Today after weeks of this I flew the 747 F and noticed it was working, but with the other aircraft the same Disconnected message when I click on addons within the sim.

I have it mapped to the right p3dv4 path and ive checked that all options are green for p3dv4.

Any help appreciated.

Cheers.

]]>543923Sat, 20 Oct 2018 09:56:27 +0000Getting rid of wing condensation at cruisehttps://dev.avsim.com/forums/topic/543163-getting-rid-of-wing-condensation-at-cruise/ Hi,

is it possible to get rid of the overwing condensation effect during cruise? I do like this effect, but not half of the time in the cruise segment of flight while being slightly above FL300.

Whenever I take a plane (in real life), I look out of the window and at the wings, but I never ever noticed this effect during cruise. It seems to happen just a tad too often.

Regards, Lars

]]>543163Fri, 05 Oct 2018 15:43:43 +0000Immersion PMDG 777 wing condensation issuehttps://dev.avsim.com/forums/topic/537771-immersion-pmdg-777-wing-condensation-issue/ I just bought the immersion pack and when I tested it the condensation on the wings was doing weird. The condensation is not lined up with the wings while taking off.

(it is more clearly on photo)

Is anyone albe to help me out with this?

 

]]>537771Thu, 14 Jun 2018 19:55:22 +0000unable to installhttps://dev.avsim.com/forums/topic/535410-unable-to-install/ I need some help please trying to install the 777 immersion. I get an error "Unable to find the Smoke System in Aircraft.cfg." anyone has experienced this before????

]]>535410Sun, 22 Apr 2018 00:26:51 +0000Wing vortice issue PMDG 777https://dev.avsim.com/forums/topic/534350-wing-vortice-issue-pmdg-777/ 2yggat.png

Goodday,

I have an issue with my wing voritce at the PMDG 777.

Can you help me?

 

Greetz,

Jeffrey Jacobs

]]>534350Sat, 31 Mar 2018 13:27:20 +0000777 Immersion Pack Effect issuehttps://dev.avsim.com/forums/topic/527863-777-immersion-pack-effect-issue/ Hi! I‘ve recently purchased 777 Immersion and PrecipitFX pack but I‘m having issues with it. As you can see from the pictures engines look weird. How can I fix this? Thanks.G9Q0MN.jpg

z0vBoO.jpg

 

]]>527863Thu, 04 Jan 2018 18:47:37 +0000After Updating for P3Dv4.2 777 Immersionhttps://dev.avsim.com/forums/topic/531269-after-updating%C2%A0for-p3dv42-777-immersion/ Hello

 

After Updating for P3Dv4.2 777 Immersion looks very strange see attachement.

https://ibb.co/cJ74an

https://ibb.co/hHpp87

I do not have this issue before updating, is there anyone else has this issue?

]]>531269Wed, 14 Feb 2018 11:51:23 +0000Please Install PMDG 777 Before launching this installerhttps://dev.avsim.com/forums/topic/491269-please-install-pmdg-777-before-launching-this-installer/Hello!

I've got something going on here. 

I want to install the 777 Immersion, but then an error message pops up saying: Please Install PMDG 777 Before launching this installer. 

Is this because i have FSX running on an external harddrive? 

Help would be appreciated

]]>491269Mon, 04 Jul 2016 21:24:59 +0000Getting error when applying 777 immersion in P3D v4https://dev.avsim.com/forums/topic/522628-getting-error-when-applying-777-immersion-in-p3d-v4/ I get this pop-up error when I try to install 777 Immersion:

Installation Error: System.InvalidOperationException: Collection was modified; enumeration operation may not execute.
   at System.ThrowHelper.ThrowInvalidOperationException(ExceptionResource resource)
   at System.Collections.Generic.List`1.Enumerator.MoveNextRare()
   at System.Collections.Generic.List`1.Enumerator.MoveNext()
   at A.c.A(Boolean )
   at VFXCentral.MainWindow.A(Object , DoWorkEventArgs )
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)

 

 

]]>522628Sun, 22 Oct 2017 15:57:25 +0000Effects on ground?https://dev.avsim.com/forums/topic/522441-effects-on-ground/ Hy sir Keven do u know whats going on here in p3dv4.1?

2017-10-20_10-40-39-905.png

]]>522441Fri, 20 Oct 2017 09:02:26 +0000Wing condensation at cruisehttps://dev.avsim.com/forums/topic/521883-wing-condensation-at-cruise/ Have never been to tropical areas of the world, but is it normal to be in cruise over the Middle East/Asia and wing condensation is coming over the wings? At FL350 TAT -12C over the Indian Ocean.

]]>521883Fri, 13 Oct 2017 20:41:28 +0000777 Immersion in P3D v4.1https://dev.avsim.com/forums/topic/521731-777-immersion-in-p3d-v41/ Hi,

I noticed the wing condensation not working properly in P3D v4.1. If you're not already on it here's what I see:2017-10-11_16-19-35-418.thumb.jpg.f90609

The wing condensation starts on top of the inner wing but tilts down towards the outer wing, somehow looks like a strange cloud that flies along with the wing.

Thanks for fixing in advance :biggrin:

]]>521731Wed, 11 Oct 2017 23:27:04 +0000FSFX two Accounts - Buy in the wrong profilehttps://dev.avsim.com/forums/topic/520231-fsfx-two-accounts-buy-in-the-wrong-profile/  

Good day, I bought 737 and 777 immersion yesterday. Now I have two profiles on VFX Central.

Once a***.***el@gmx.de and a***.***el@icloud.com

I have bought the immersion on ****@gmx.de and not on ***@icloud.com. Property but this not yet activated.

Can I now override the immersion somehow on the other profile?

I would not again 50 € spend. On the other profile I can not use this because I fly only with the ***@icloud.com email.

The support has not yet answered me. I hope you guys have tips.

 

Many Thanks

]]>520231Tue, 19 Sep 2017 13:52:45 +0000Default contrails too?https://dev.avsim.com/forums/topic/518809-default-contrails-too/ Hi all,

It looks like i have 2 sets of contrails showing ( default & immersion ) does anyone know why this might be and if there is something i need to do that i may of missed. 

]]>518809Wed, 30 Aug 2017 19:41:39 +0000P3Dv4 777 no condensationhttps://dev.avsim.com/forums/topic/514672-p3dv4-777-no-condensation/ Hello all!

First of all, thank you for updating the 777 Immersion Pack so fast for the PMDG T7.

I just have a little problem, I do not see any condensations. 

I tried it during foggy conditions (Dewpoint and Temperature were the same, i think it was 11°C), but no condensations in the engines and no condensations on the wings appeared.

All the other effects like the wheel spray on wet runways, etc. works perfect.

Is this still a bug or is there something wrong with my installation?
Thank you in advance!

Kind regards

Matthias

 

]]>514672Tue, 11 Jul 2017 19:50:54 +0000[Update] 777 Immersion Updated for P3Dv4https://dev.avsim.com/forums/topic/515241-update-777-immersion-updated-for-p3dv4/ 5.jpg

Good evening folks!

Yesterday night, we published a comprehensive update to 777 Immersion. In addition to P3Dv4 support, we also revamped the volumetric lighting for the landing lights, taxi lights and runway turnoffs. This update has been rolled out for FSX, FSX:SE and older versions of Prepar3D free of charge to existing customers. Prepar3D v4 users are not required to have Dynamic Lighting enabled to see volumetric lighting effects. See the result in screenshots below!

To update 777 Immersion, simply go in VFXCentral and press DIRECT INSTALL or MODIFY/UNINSTALL to enable the effects in P3Dv4.

See the result in screenshots below!

5.jpg

2.jpg

3.jpg

1.jpg

Regards,
Keven

 

]]>515241Mon, 17 Jul 2017 19:35:41 +0000P3D v4: Volumetric light vs dynamic lighthttps://dev.avsim.com/forums/topic/514668-p3d-v4-volumetric-light-vs-dynamic-light/ Hello,

 

as the immersion 777 is P3D v4 ready now, I wanted to ask if the FSFX lights are also then dynamic lights?

Or do I loose the dynamic light ability when I install their volumetric lights?

 

many thanks

]]>514668Tue, 11 Jul 2017 18:14:38 +0000Immersion package for 777 (in Prepar3D V4)?https://dev.avsim.com/forums/topic/512198-immersion-package-for-777-in-prepar3d-v4/ Hi all,

Was wondering - does the PMDG 777 Immersion Package work with Prepar3D V4?
The reason I'm asking is since Lockheed-Martin has re-worked the lighting engine within Prepar3D V4, would there be any issues with the immersion packages? 

I guess this question also goes for the PMDG 737NGX, when it's released for Prepar3D V4?

]]>512198Sat, 10 Jun 2017 07:27:08 +0000immersion 777 for pd3 v4https://dev.avsim.com/forums/topic/514548-immersion-777-for-pd3-v4/ I try install the new version for the pmdg 777 but got a message "unable to find smoke system in aircraft.cfg" any help how to get around this. thanks.

Leslie

]]>514548Mon, 10 Jul 2017 02:54:49 +0000Immersion error after PMDG update.https://dev.avsim.com/forums/topic/514054-immersion-error-after-pmdg-update/ I fired up FSX:SE today and encountered an error message when VFX central started up. The 777 Immersion product is not working anymore and will not install.

 

 

]]>514054Sun, 02 Jul 2017 23:29:51 +0000