LINDA Downloads

Hello I'm trying to setup a button so when you press it keeps it on so when you press it again it turns off, how do you make that possilble in Linda? Kind Regards would love if someone can help Benedict

Hey all, id like to know if you are using the pmdg 737 for msfs as well as the cdu2 fmc with screen as well as mcp combo v1? Currently using fbw and unfortunately the knobs are not in sync hdg & spd. Im thinking about purchasing a payware planes if my 2 peices of hardware are compatible

Does anyone have these 2 pieces of equipment working? Im having lots of issues with fbw and may make the jump to pmdg. Ive owned them in the past and things worked well. The best experience for cdu 2 and mcp combo was with the leveld 767. Before making the plunge as money is involved for pmdg, id like to hear more about success stories. Its very limited for mcp 1 and the cdu 2 with screen. Thank you

Good day folks! Here's a module for the BBS A340. I haven't tested if all the functions in the module work, but those that I have tested worked fine. I added as many buttons as I felt necessary, feel free to come with suggestions and of course, report if there's something not working. Link: https://drive.google.com/file/d/1GgdkL58-gzoj5wkQcf59lYXFjg2eWACo/view?usp=sharing (awaiting AVSIM Library link) Installation: Unzip in your LINDA/aircrafts folder and you should be good to go. Tested on P3D V5 (yes, V5 and not V4) so it should work on V4 (same installer). IIRC when I attempted this in V3 the code for the buttons may have been the same, so try …

Hi, I have worked up a very basic LINDA module for the CS767 for my own use. Since no current module exists for the CS767, I thought it might be of some use to folks out there. Here it is. It was kind of fun to figure out how everything works behind the scenes. I hope that this module enhances your enjoyment of the CS767. If you would like to request that I add a particular command or feature for you, I would be happy to consider doing it, however, since I currently work two full-time jobs, do not expect a quick turn-around. Best, Matthew Smith

Probably interesting for some of you... I just started maintaining an LINDA aircraft module for the FlyByWireSim A32nx (A320 NEO / A20N) in MSFS. You can find it at https://github.com/joeherwig/A32nx-LINDA-aircraft-module Even though it requires the FSUIPC LVar WASM Module and at least FSUIPC 7.1.0f (the "f" is important!) it might probably help some of you to make use of your great devices and home cockpits. I'd be glad, if some of you would join the development. Just fork the repo and send me a pull request with your changes. Joe

Attached is a version 1.0 of a module for the Aerosoft CRJ for MSFS. It is very basic for now but has many functions including, I think, most of the common switch functions that people are looking for. I will continue to iterate and add more features as time goes on. The latest version of FSUIPC is required and you must activate the WASM module within FSUIPC. This module would not have been possible without the great work being done by the FSUIPC team to add the WASM module and give us access into LVARs in MSFS. Thanks also to the FBW team paved the way with their A32NX module which was the first to use the WASM module in FSUIPC 7. Here it is. Please f…

Aerosoft CRJ 700/900 and Pro Module v1.8b This module provides support for the Aerosoft CRJ-700/900 and new CRJ Pro. . Any issues or bugs found should be reported on the LINDA Support sub-forum. This module works with both the original Aerosoft CRJ-700/900 and new CRJ Pro releases. It is important to delete the existing Aerosoft CRJ-700-900_vX.X beta folders after installing this full version of the module. Your existing configurations should be copied from the /linda-cfg/aircrafts/Aerosoft CRJ-700-900.... folder to the new /linda/cfg/aircrafts/Aerosoft CRJ. Download CRJ module Functions include - see enclosed functions.txt file for a full list of fun…

This module is for the Aerosoft A3xx Professional series (covering the A318, A319, A320, A321 and the new A330). Many functions used on the old Aerosoft Airbus A318/319/320/321 have been renamed. Additionally, those functions unique to the new A330 have the prefix A33_. NOTE: Users who have installed the Aerosoft A330 beta module should delete: /linda/aircrafts/Aerosoft A330 Pro /linda-cfg/aircrafts/Aerosoft A330 Pro Changes: v1.9 Fix for VRi MCP Combo Flight Information display v1.8 Fix for various code errors v1.7 Fix error in v1.6 that stopped LINDA working v1.6 Adds APU Batter…

I started editing the exisiting module and got a lot more functions ready. Download is here : CS B757 v0.1 Dec 2019

Here you can download the module version 1.2 for the A2A P40 (I'm a bit suprised as I thought, that I have uploaded already a module. But can't find it. Anyway here is it now as requested) http://www.awginfosys.net/LINDA/Downloads/A2A_P40_v1_2.zip To install the module: Download and expand the zip file into a suitable accessible location (ie. desktop). Open LINDA and ensure that the aircraft selector is not Sync-ed to Sim and --Aircrafts-- is displayed. Click on the Maintenance option. Under Import Aircraft Module click on Select Source Folder and locate the folder AA2A_P40_v1_2.zip. Click on Select. …

Here is the LINDA module for the Nemeth Designs Skycrane S-64 (module v.1.02) made by Michael Henrik Larsen LINDA module for Nemeth Skycrane S-64 updated to v. 1.02: Nemeth Skycrane S64 v1.02 Installation notes can be found in the zip file. Update v 1.01 -> v 1.02: - Sea Snorkel Toggle added (Extend/Retract). - Position Lights Toggle added (On - Flash - Off). - Anti Collision Lights Toggle added (On - Flash - Off). - Strobe Lights added. - Mirror Lights added. - White and Red Dome Light corrected. - All Doors Toggle added. - N1 Levers Off-Idle Toggle added. - Sounds added for: Parking Brake Nose …

This module provides functionality to operate the Quality Wings 787 using LINDA. It provides functions for most of the Overhead panel, MCP (Captain/Left) and pedestal. Note: This module includes a FSUIPC mouse macro file QW787.MCRO. This is installed in the main /modules folder. The ND Plan/Map Menu knob functionality is not fully stable and cannot be synchronised with mouse selection of the ND Map/Plan/Menu buttons. A reset function has been added to reset flags. Users are recommended to use the mouse for ND mode selection. Beta v0.7 fixes an issue with the Both Runway Turn Off lights. adds extra delays for Landing Light operation. …

This is a new module for the MilViz B350i KingAir. Note: This is a first Beta Version of the LINDA module! It does not contain all switches and is not meant to be complete. But most of the important ones are in, already (about 200 already). But I wanted to share it already, so that you could start with it. Expect a new version not earlier then the coming SP of MilViz for the B350, where they hopefully fix a lot of bugs then. Download: MilViz_B350i_v1_0 beta To install the module: Download and expand the zip file into a suitable accessible location (ie. desktop). Open LINDA and ensure that the aircraft sel…

Hi, I just made myself a LINDA module for CS757, only the part for what I need: eg the autopilot part. Module features: All Switchs/knobs/buttons on MCP panel AP, AT quick disconnect button GA button Landing gear level off Download: https://library.avsim.net/esearch.php?DLID=215585 Release Notes: All Lvar for CS757 can be found at CS757's SDK manual(vol.6), you are free to modifly and reupload based on this module. All buttons/knobs are not animated, might be CS's limitation.

Here you can download the module for the new Leonardo Maddog X module 1-3 (Maddog released 2018) Installation: Extract the archive and simply place anything inside the Leonardo_MaddogX_v1_3 folder into your Modules folder. If you are an MCP Combo user you can rename the *.default file to *.lua inside the linda-cfg\aircrafts\Leonardo MaddogX folder to get a pre-configuration for the Combo Note: MCP Combo users: If you use rotaries, dials etc. in the VC, the displays are not synced any more! Or in other words: the sync is just one-directional, NOT two-directional (only MCP to VC, not back)! (sorry, thats for technical reaso…

Ok, here is the awaited module for the VERTX DA62 Module version 1.2 simply unzip the content into your modules folder. If you need a default configuration and in case you install this module the first time, please rename the files in the folder Modules\linda-cfg\aircrafts\VertxDA42 from *.default to *.lua Special note for MCP Combo users: I have set up the settings knobs of the PFD and MFD (lower right knobs) in the following way: PFD lower right knob is the MINS knob on the MCP Combo MFD lower right knob is the ND Mode knob (APP;VOR;MAP;PLN) on the MCP Combo Pressing the FPV button on the MCP Combo is switching between bi…

Hello, i finished up my first LINDA module. It is for Cera Sims Bell 212/412. It has basic features for engine start, light control and door control. It is now possible to start the Bell 212/412 completely via joystick and/or switch controls. All necessary switches are working to get from cold and dark to ready to fly. No need for mouse clicks anymore. I did not hold on to the standard operating procedures discribed in the manual. v 1.2 Module features - Not available at this time - toggles now working - toggle standby attitude indicator - toggel anticolission light seperatly - toggle position light seperately - toggle fuel…

This new module for the Milviz UH-1 Huey Redux has been kindly provided by Graham McNicol. It is released on an 'as-is' basis for those keen to fly the aircraft with LINDA. No default VRi MCP Combo configuration files are provided. Download: Milviz UH-1 Huey Redux v1.0 To install the module: Download and expand the zip file into a suitable accessible location (ie. desktop). Open LINDA and ensure that the aircraft selector is not Sync-ed to Sim and --Aircrafts-- is displayed. Click on the Maintenance option. Under Import Aircraft Module click on Select Source Folder and locate the folder Milviz_UH-1_Huey_Redux_v1_0. …

This new module for the Milviz DHC3 Otter has been kindly provided by Graham McNicol. It is released on an 'as-is' basis for those keen to fly the aircraft with LINDA. No default VRi MCP Combo configuration files are provided. Download: Milviz DHC3 Otter v1.0 To install the module: Download and expand the zip file into a suitable accessible location (ie. desktop). Open LINDA and ensure that the aircraft selector is not Sync-ed to Sim and --Aircrafts-- is displayed. Click on the Maintenance option. Under Import Aircraft Module click on Select Source Folder and locate the folder Milviz_DHC3_Otter_v1_0. Click on Selec…

Hello, here is the LINDA module for the PMDG 747 QOTSII PMDG 747 QOTSII 1_5 simply unzip the content into your modules folder. If you need a default configuration and in case you install this module the first time, please rename the files in the folder Modules\linda-cfg\aircrafts\PMDG 747 from *.default to *.lua THIS VERSION NEEDS THE CURRENT FSUIPC VERSION 4.963 or higher direct download link or link to "updated modules" section in the FSUIPC support forum Have fun! 1.5 OH_ENGINE_2_START fixed 748 ND range rotary improved 748 TCAS rotary adjusted 1.4 fixes and changes for 747-8 release Wipers added …

This new module for the Milviz DHC3 Turbo Otter has been kindly provided by Graham McNicol. It is released on an 'as-is' basis for those keen to fly the aircraft with LINDA. No default VRi MCP Combo configuration files are provided. v1.2->v1.3 Module structure improvement so only "DHC-3T Otter" is required to sync to all variants. v1.1->v1.2 All function names changed to be user-friendly. (This will require updating your switch assignments.) Modules for all variants-- wheels, skis, floats, and amphibian added Instrument Light dimmer added combination T&S and Comp switch added Cabin fan Hi-Lo and toggle switch …

Hello again, here you can download the module for the A2A Beech Bonanza V35B A2A_Beechcraft_35_Bonanza_v1_11 To install the module: Download and expand the zip file into a suitable accessible location (ie. desktop). Open LINDA and ensure that the aircraft selector is not Sync-ed to Sim and --Aircrafts-- is displayed. Click on the Maintenance option. Under Import Aircraft Module click on Select Source Folder and locate the folder A2A Bonanza. Click on Select. Click on Install/Overwrite Module button. Open your Flt Sim and click on Sync To Sim (ensure A2A Bonanza displayed and outlined in orange). …

This module for the A2A P51D. Download: A2A P51 Mustang v2.1 To install the module: Download and expand the zip file into a suitable accessible location (ie. desktop). Open LINDA and ensure that the aircraft selector is not Sync-ed to Sim and --Aircrafts-- is displayed. Click on the Maintenance option. Under Import Aircraft Module click on Select Source Folder and locate the folder WoP3_P51D_civ_v2_1. Click on Select. Click on Install/Overwrite Module button. Open your Flt Sim and click on Sync To Sim (ensure Aerosoft A3XX Pro displayed and outlined in orange). Enjoy. Details of available functions are con…

This is a LINDA module for the Aerosoft Catalina flying boat. Download: Aerosoft Catalina v1.3 To install the module: Download and expand the zip file into a suitable accessible location (ie. desktop). Open LINDA and ensure that the aircraft selector is not Sync-ed to Sim and --Aircrafts-- is displayed. Click on the Maintenance option. Under Import Aircraft Module click on Select Source Folder and locate the folder Aerosoft_Catalina_v1_3. Click on Select. Click on Install/Overwrite Module button. Open your Flt Sim and click on Sync To Sim (ensure Aerosoft Catalina displayed and outlined in orange). Enjoy. …