LINDA Downloads

Having big time to make Linda work, beside other issue not related to this thread, I am trying to download the Aircraft Module for PMDG 737ngx, I found many links and I believe the latest is since 2022. All these links point to awginfosys.net/blablablafilenamebla which always return as 404. How or where to download these modules? Thank you for your time! Alessandro Montanari EDDN

LINDA 3.1.1 provides compatibility with the new Prepar3D v4 (P3Dv4) 64-bit flight simulator and all existing 32-bit flight simulators (FSX, FSX-SE and P3Dv3.4). It should installed into the Flt Sim's module folder. Each adult Sim requires its own installation. This version adds the new GSX Library for working with the FSDT GSX2 add-on (lib-GSX.lua v1.3). This release requires a registered version FSUIPC5 5.153 or later to work with P3Dv4. FSUIPC4 4.974 or later is required for other 32-bit Flt Sims (FSX, FSX-SE or P3Dv3.4). LINDA WILL NOT FUNCTION WITH OLDER VERSIONS OF FSUIPC. IT IS NOT COMPATIBLE WITH P3Dv5 OR FSUIPC6. This release provides full support f…

LINDA 3.3.5 provides compatibility with the new Prepar3D v5 (P3Dv5) 64-bit flight simulator and FSUIPC6 6.1.7 or later. It can also be used with Prepar3D v4.x using FSUIPC6. This update contains ONE fix that not all users will need. See note below. This release requires a registered version FSUIPC6 6.1.7 or later to work. It is no longer compatible with FSUIPC5 or FSUIPC4 and all existing 32-bit flight simulators (FSX, FSX-SE and P3Dv3.4) - use LINDA 3.1.1 instead Changes This release maintains internal changes to support development and distribution. This version provides compatibility with the VRInsight CDU2 and CDU3 panels. Special thanks go to Nicolas…

This release provides compatibility for the Microsoft Flight Simulator (MSFS) 2020 and the formal release of FSUIPC7 7.3.6 or later. This update contains ONE fix that not all users will need. See note below ****************************************************************** IMPORTANT NOTICE This release addresses an issue some users have experienced with an error caused by an unexpected symbol found when loading certain configuration file (config-sys.lua and config-hid.lua). The previous fix referred to Language Support and UTF-8. The release may cause some initial errors when LINDA is loaded. Users should check the fsuipc7.log (in LINDA Console) for errors like:…

LINDA provides a number of modules for controlling various FSX/P3D aircraft. These are not compatible for use with MSFS2020. Due to the expiry of the old LINDA domain several modules are currently not available. There are a limited number of MSFS-specific modules available in beta form at this time. These are marked as such in the title. The following modules are currently available (those in bold are recently reinstated/updated): A2A B17G A2A Bonanza 35b A2A C172 A2A Cessna 182 Skylane A2A Piper PA28 Cherokee A2A P51 Mustang A2A Piper Comanche 250 A2A L049 Constellation A2A Spitfire A2A T6 Texan …

Hello, in this little tutorial we try to explain how to install a LINDA module. (not all steps are 100% valid for older modules. But the main handling remains the same) This tutorial IS NOT about installation of LINDA. That means at this step, LINDA and FSUIPC etc. is already installed, tested and running! 1) Download First step is to download the files. We provide DropBox links, which will lead to the DropBox site with further download instructions. The files you download are ZIP or RAR Archives. You need one of the countless (freeware) tools to unpack them or WIN10 has one built in. 2) Folder structur…

Please, in this forum no requests for new modules etc. You can discuss or ask in the repective module threads, but please do not open new threads here! We just want to avoid any mess in this part of the forum so that people could find their modules and information easily. Thanks for your understanding!

Hi, Anyone has a working module for this aircraft? I tried to understand how to make a module but no luck at all.

Hallo liebe Gemeinschaft, Welche Linda Version und wo finde ich diese muss ich für meinen Flight Simulator X 32bit FSUIPC 4 herrunterladen? Ich nutzte folgendes Flugzeug PMDG 737 NGX for FSX gibt es dafür schon ein geschriebenes Modul vielleicht für Die MCP Combo für Boing? Ich danke Euch für Eure Hilfe LG Markus

Good Morning Fiirst big thanks to ScotFlieger (Andrew) for this software Linda which is the best I known Many thanks also to Pete and Joe Downson you created the best addon a long time ago for flight simulators FSX And today MSFS2020 🙂 I would like to share a profile, I modified with an existing profile created by Andrew and Gunter for CRJ plane. I have only modify LVars. It is not perfect but it allows to recognize functions and attribute to yours joysticks I am not a soft programmeur so there are a lot of errors. But to test LVars I am using FSUIPC7 works perfectly. My material Oldest VR INSIGHT MCP COMBO 1 CDU2 (nice to add in Linda) CDU1 O…

The VRinsight profile for the PMDG 747 did not work in FSX. Looking for PMDG 747 v1.2 that was tested to work with LINDA v 1.1. I am getting back to my legacy flightsims which have better and smoother frame rates on an old Windows 7 PC that my newer rig. Joe

Hi folks, since the update from PMDg to the Operation Center 3 I have the problem that I can start the Linda software normally and also load the PMDG 777 (module 1.5a - Aug 2020) normally... But nothing happens in the cockpit. This means that I can program all switches (EFIS + Panel Switch + Landing Gear + Throttle ) via the Linda software... but it does not trigger any action in the cockpit. If I press the WXR button on my EFIS panel (from FlightsimPm)... I can see the action in the software (button for the assignment is displayed) but this is not implemented and displayed in the cockpit. And unfortunately this is the case with all buttons and switches...…

Hi all, I know the PMDG 777 hasn't been released long ago, but I wanted to create a thread and ask whether there will be a PMDG 777 Linda module at some point in the future, or whether you can perhaps use the one from the p3dv5. Or maybe someone has already got their combo panel working. many Greetings Seralia

Hi, The link to LINDA 4.1.5 is broken https://www.awginfosys.net/linda/downloads/LINDA_4_1_5_289.zip Is there any other link? Thanks Kiko

This is a new module for the PMDG NGXu (based on the current NGX module). Several variables have to be changed and GSX Service is disabled (due to recent GSX updates), but in the end, the module should be working flawless with your current NGX assignment. Download: PMDG_737_NGXu_v1_4 IMPORTANT! You need the latest FSUIPC version 5.153 or later for this module! This FSUIPC version contains updated NGXu offsets. IMPORTANT! The old NGX and the new NGXu will not work together if both modules are activated! Both addons can remain installed, but you have to make sure, that only one LINDA module is active! …

PMDG 747X Created by Capt. PERO Module Features Most controls are accessible (MCP, Lights, Electronic, etc.) Most of control have ON/OFF/TOGGLE actions available No more mouse macros needed HDG, SPD and ALT Display shows current values (not AP values) Display show FLAPS, GEAR movement and Autopilot Info (see Display) Requirements Please read the complete PDF Documentation >= LINDA v1.1 (tested) PMDG 747X Release notes All MCP functions are available and work with VRinsight MCP Display just shows current values Versionhistory 20111217 | v1.0 – Initial Release 2011…

Here you can download the LINDA aircraft module for the PMDG 777 (module version 1.3a). Version 1.5a adds missing VRi Combo MPC .default files. It is only applies to VRInsight MCP panel users. Installation notes: Download and unzip it and place the two folders into: */Microsoft Games/Microsoft Flight Simulator X/Modules Say "yes" if he'd like to overwrite anything Your current Combo settings wouldn't be overwritten, but you find in Modules/linda-cfg/aircrafts/PMDG 777 files named *.default. name them to *.lua to use them. Download PMDG 777 Module 1.5a 1.0 --> 1.1 ADIRU fix Display sync fix 1.1 to 1.2 …

Here you can download the module for the new Leonardo Maddog X module 1-3 (Maddog released 2018) Installation: Extract the archive and simply place anything inside the Leonardo_MaddogX_v1_3 folder into your Modules folder. If you are an MCP Combo user you can rename the *.default file to *.lua inside the linda-cfg\aircrafts\Leonardo MaddogX folder to get a pre-configuration for the Combo Note: MCP Combo users: If you use rotaries, dials etc. in the VC, the displays are not synced any more! Or in other words: the sync is just one-directional, NOT two-directional (only MCP to VC, not back)! (sorry, thats for technical reaso…

Hi, Many links are dead. I'm looking for the Majestic Dash 8 LINDA Module. Where to get the zip file please?

Majestic Dash 8 Q-400 Module version 2.6 Majestic Dash 8 LINDA module version 2.6 This update adds a specific preprogrammed configuration default file for the VRInsight Original MCP (config-mcp.default). Installation Notes: Download and unzip it and place the two folders into: */Microsoft Games/Microsoft Flight Simulator X/Modules or similar for P3D Say "yes" if he'd like to overwrite anything In the folder Modules\linda-cfg\aircrafts\Majestic Dash 8 Q-400 you'll find 3 files. They contain MCP Combo default assignments for the Dash8. If you want to use them rename them from *.default to *.LUA I will…

This module is provides most of the important functions for buttons, knobs and switches for the FSLabs A319X, A320X, A321X and new A320SL and A321SL (Sharklet) variants. It has been tested with the LINDA 3.3, P3Dv5.3 HF1 and FSUIPC 6.1.7. This update adds partial implementation of the VRInsight Combo 2 MCP(Boeing) and FCU(Airbus) displays based on the latest FSL Hardware Interface information. It does not work with the original MCP1 panel. The following items are not implemented: Speed Managed Mode dot. Altitude Managed Mode dot. Vertical Speed input and display. Speed Mach input does not display correct mach number until released. FP…

This module has been developed for use with the Fenix Airbus A3200 running on MSFS 2020. The module requires use with LINDA 4.1.4 and FSUIPC7 7.3.6 or later. See Note below on Lvars. Due to delays with MSFS exposing Lvars to FSUIPC7 on start-up, it is strongly recommended that you start MSFS2020, load the Fenix A320 ready to fly and wait a minute before starting FSUIPC7 and LINDA. It is also recommended to click Restart LUA Engine as the last thing. A full list of functions is provided via the link below. Default configuration setup files are provided for all VRi MCP panels and CDU2/3. However, no testing has been possible on the MCP1 (Original) panel and n…

This module has been developed for use with the PMDG 737 running on MSFS 2022. The module requires use with LINDA 4.1.4 and FSUIPC7 7.3.3 or later. Due to delays with MSFS exposing Lvars to FSUIPC7 on start-up, it is strongly recommended that you start MSFS2020, load the PMDG 737 ready to fly and wait a minute before starting FSUIPC7 and LINDA. It is also recommended to click Restart LUA Engine as the last thing. Default configuration setup files are provided for all VRi MCP panels and CDU2/3. It has not been tested with the Original VRI MCP and no guarantees can be offered. Version 0.6 Beta provides significant functionality based on previous PMDG 73…

This module has been developed for use with the FlyByWire Airbus A32NX Neo running on MSFS 2022. Special thanks to Joe Herwig for his inspiration, initial design and project management for this work. The module requires use with LINDA 4.1.4 and FSUIPC7 7.3.2 or later. It can be used with the Stable (0.7.4), Development and Experimental version from FlyByWire (using the FlyByWire Installer). However, some features are only accessible via the latest Development and Experimental releases. See Note below on Lvars. Due to delays with MSFS exposing Lvars to FSUIPC7 on start-up, it is strongly recommended that you start MSFS2020, load the FBW A32NX ready to fly and wai…

Hello everyone, First of all I'm really sorry if my message is not posted in the right forum but I don't know where else to post it. I would like to know if LINDA can modify the display of the "communications" screen present on the VRInsight MCP Combo I (boeing). At present, the radio communications format is 122.80, but many frequencies have the 122.805 format. Is it possible to change the initial display to the second format? If this is not possible via LINDA, does anyone know if there is a solution? Thanks in advance for your help, Doc Translated with DeepL.com (free version)