Voice Control Version

This has happened a couple of times now. When I begin a flight, I am able to breeze through the preflight checklist, before start checklist, taxi checklist etc. However when I say 'runway entry procedure' I get NO RESPONSE what's so ever. My mic is fine and I've checked the panel to ensure the FO isn't going through any other flows (which it isn't) but for some odd reason he won't repsond whatsoever. I then try to skip that part and go to the 'takeoff' announcement but I get the same result...nothing.Any advice.

byork prejudice. Checklists do not get visually after takeoff from the bar I have to manually activate FS2CREW to pass the step. the flap does not end up with I get the call, FSX version. purchase through simmarket. everything goes well then great project sincere compliments.

Hi,i have a question. I have installed the Sp 1.1. But i have the following issue:http://ifly.flight1.net/forums/forum_posts.asp?TID=3426&title=doors-open-lightIt seems that it is alway when i use the pushback function. Steve means this is fixed in the version. Do i something wrong? It is on every second flight. Best regards Christian

Just a quick question is there away that you could have the last 12 min of the PF button opps with the FO doing anything? This would not be the first flight of the day but I like the agents asking to board and FA giving the load sheets and stuff like that. I know you can dial down the time with the arrow.

Finally I found some time starting to explore the new iFly 737NG for FSX together with FS2Crew Voice and both products are great and the combination is even better!!I have one problem though I've seen on all flights I've done so far, when I get to step 4 in the Before Taxi section on page 46 in the manual and call "Before Taxi Checklist" the FO won't respond. I've checked I'm in the right mode and that the green bar shows what I say is understood correctly. The only way I found to get around this problem is to manually advance to the next mode using the arrow and then go back and call for the "Before Taxi Checklist" a second time and then it works just fine.Any idea what …

Hello Bryan,it is defintely a problem for me, had it now for the fourth time!At the last time it happened after engine start. I started voice commander with the before start checklist (not from the begining because I wanted to see if I can reproduce the problem). The last thing I did was to disconnect from the ground crew. Then I switched on A/TH and ordered Flaps 5 and nothing happened. After that I said "set flaps five" and the window changed to FO action and nothing happens. As you can see in the log the FO got it wrong (set flaps five speed).Here is the CVR logSim Clock (16:53:59) - Captain: before start procedureSim Clock (16:55:31) - Captain: before start checklistS…

First great work ! I love your product it worth every penny !For some reason I'm getting CTD when flying the 700 model and fs2crew.I've tested B737-800 with fs2crew all ok 5+ hour flight.Trying to fly it with the 737-700 I get CTD when preforming a checklist... can be b.start checklist or after start checklist...Tested the 737-700 with no Fs2crew all went smooth...Any idea ???

This has happened 3 times once on the groun twice in flight as the FO is doing his thing I push F10 to bring up knee board and the FS9 CTD it only happens when the FO is talking. Using W7 64 Bit. I can learn not to press F10 until he is done I guess. I have the package deal of FSCrew Voice and Button thank you!

A heads up...Do not "re-size" the FS2Crew Panels.It can result in weird behavior or a CTD.You can still drag the panel around, but do not re-size them.In the next update, I'm going to "lock" the FS2Crew panels so they can't be resized.Cheers,

Hi guys,I'm an avid FS2Crew products user and very familiar with the voice editions since I pretty much own all of them. I have a little problem with the iFly one on FSX that I cannot seem to sort out. Basically, everything is working perfectly, beside one little thing. The AP HDG gets stuck to whatever value is there, let's say 317 and there's no way to move it from there or, for better saying, you can change the number, but it immediately gets right back to where it was.In other instances/aircraft with the same issue, turning the Voice off and then back on would work and solve the problem, but not with the iFly. Any ideas ??Thanks for all your help and the great quality…

Hello, what actions are in "B. START PROC ' expected? Thank you, Greetings André

Hello All,I am using the vistalizator, fs2004 and and i have some words on checklist that i am unable to due it. I know that i can say next or check but for example for take-off i cannot say.Only on the Pre flight checklist i have to say 3 ou 4 next or check to go to the next item.Words like auto and on it´s not recognize, on the screen is saying off on that green line. For example when I'm announcing take-off will say on the green line gear down.The rest of the flight or checklist i don´t know yet.The version of fs2crew is 1.1Any sugestions?Thank you

Hi,Is is possible to disable the green on screen text bar, I can't fighure out how?Tony

Hi, i want to do a thru flight. But when i start a new Flight in FSPassengers, the Aircraft is cold and dark again. Can somebody help me with this Issue?Thomas

I use a second PC where I run FSInn and a few other programs. Because my FSINN VATSIM communications are on the 2nd pc, my headset is there also. Is there any way to be able to use the voice edition with this setup or would a second mic be required.?thanks,Sterling

Hello Brian,I must say this is a nice product ! I got the Voice+Button bundle, but have only tried the Voice version so far.I also have the Maddog Voice commander, and using my experience from that, I have managed to run the iFly version (almost) without reading the manual.It is really easy to use, works perfectly, and I wouldn't hesitate to recommend it to others.My only objection is that the female french FO is missing !!!! Must go back to the Maddog once in a while, as she probably has no license for the 737NG.Also, I am kind of missing the 'Hello Captain, how are you?' greeting.On of the fun new things is watching the FO slowly turn the dial, when you say 'Set FL370'…

Hello,It's my first time to use Fs2Crew.And there's problem before I start my experience on Fs2Crew. According to the manual，I have to make sure the language in windows speech recognition is English-US，however，My OS is win7 ultimate Chinese， where can i get the English Language Pack from Microsoft？ I have tried for hours but get nothing useful.any helpful reply about this is appreciated.

Hi Why does the FS2Crew stop responding on my voice ca. 3 min. after i start the PF?Ole D.

Hi guys, what's up ?i got a problem with the start-up sequence with IFly 737ng ( all models), because, after copilot test the ENGINE/ APU FIRE WARNING SYSTEM & EXTINGUISHERS, he don't set the position lights, and he don't set left forward fuel pump on.... he turn on APU before this...the right way would be if the co-pilot of (fs2crew) set left forward fuel pump on and then start APU...Please, if any people can help me, I shall be very grateful.

Hi,i have a little problems on short flight. For Example from EDDL nach EHLE. I climb to FL120. When i want to start the decent checklist in 90% comes a CTD. Is there anything else i must do bevor the Checklist? When i fly higher i have not the problem. Best regardsChristian

Bryan,I just wanted to drop by and say thanks for a wonderful product! I have flown my 10th FS2Crew iFly fsx flight today and it's just great! Fs2Crew has completely changed my simulator experience as I'm sure it has most others. On the PMDG forum and many others, the talk these days is the "immersion" factor. Let me tell ya, that as a professional pilot, this program is what adds the immersion factor for me! The voice commander edition for the Maddog is still my favorite FS2Crew release to date, but I think that's just because I have so many hours on that one. Anyways, just wanted to say great job and thank you.Matt

Hi Bryan,Now tried three seperate occasions to pushback from stand at London Gatwick.Once FS2Crew starts the push, well, quite simply, it never stops. Even pressing VOICE button fails to stop it!Any ideas?ThanksWillie G

Hi Bryan,since I installed the Version 1.1. for FS9, I had 2 CTD while reading a checklist. The first CTD occured while reading the "secure checklist" and the 2nd CTD occured while reading the "before start checklist". I made a clean install of the iFly SP2.1 last weekend and I made a clean install of fs2crew 1.1at the same time, too. I am running FS9 on a German Windows XP SP3 an I am using TrackIR4 and some Saitek stuff including the sst-software for programming the soft mute function. The windows event log only shows two errors every time, such a CTD occurs. But these errors are not explained in any manner. Just "error".Any idea?Best regardsStefan.

Hello BryanIs there a way for a Voice Command to the FO/PNF to turn off the taxi light just before I turn into the relevant parking bay/gate? I'd seen this feature in one of my other Voice Commander add-ons but cannot for the life of me get my FO/PNF to switch it off.All other aspects of the VC for this particular aircraft are excellent. Thank you for a great product.Makes flying a very complex aircraft like this one a joy.

Said it before, nice work on this one (again). Always a no-brainer to buy the FS2Crew voice titles. :smile:Since some titles already offer some eastereggs or smart comments like 'ok, Speedy Gonzales, why don't we close the doors first?' I'd like to suggest some landing comments from the FO or some cabin response.Doesn't have to be this release though, but I like the way the A2A B17 does this with a short 'that's how it's done' or 'maybe we should practice some more touch'n gos'.Or even some of those youtube-like comments over the PA when I've landed too hard. 'The Captain now bounces the plane back to the Gate, remain seated throughout the process' As said, such things co…