Voice Control Version

Capts, To make FS2Crew iFly 737 work in P3D V3, you need to do this: 1. Re-install the iFly aircraft. 2. Install this update from iFly. http://ifly.flight1.net/forums/forum_posts.asp?TID=14899&FID=13&PR=3&title=revised-file-updates-26-aug-2016-0300z 3. Run the P3D V3 iFly Config Manager and enable FS2Crew. 4. Manually copy the FS2Crew .gau file from here: Main P3D Folder\FS2Crew2010\Versions\IFly737\Gauges\ And copy it to the main "Gauges" folder in the P3D V3 directory. That's it!

Attention FS2Crew iFly 737 users: NOTAM: 22 January 2014 Version 2+ of FS2Crew for the iFly 737 NGX is ready! Important: THIS UPDATE IS NOT BUILT INTO THE MAIN INSTALLER. THE INFORMATION IN THIS THREAD SUPERCEDES ANY ASSOCIATED INFORMATION IN THE MAIN OPS PDF MANUAL (ESPECIALLY WITH RESPECT TO 'BUTTON VERSION' JOYSTICK AND KEYBOARD ASSIGNMENTS). Download link: http://fs2crew.com/cart/Updates/FS2CrewIFlyV2.zip Change Log Version 2.4 (FSX Button Control Only): 1. Updates the FSX Button Control only. Corrects problem associated with pre-flight sounds playing during Securing flow. Change Log Version 2.3: 1…

SPECIAL NOTAM - 16 JULY 2011FS2Crew is proud to announce that the FSX Version of FS2Crew for the iFly 737NG has been released for sales!!!Now you can run the most advanced 737 crew simulation ever created in FSX!Click here for more information!A special new 'bundle' version is also available for those who want the Voice and Button control versions together at a reduced price!A special coupon code is available that gives 25 percent off the purchase price. The code is: FSX737Notes:1. The installer also includes the FS9 version. The FS9 (Voice) Version has been updated to V1.1. (To get 1.1, you'll need to download the complete package again and re-install).2. Please ensure y…

Hi, I know this is a legacy product, but was wondering if the following could be clarified... The manual states that the Transition Level should be set in the DES FORECASTS page of the FMC. However it appears that the Transition Level call during descent takes it's value from the Transition Altitude value in the PERF INIT page instead. Is this correct? I did see a very old post suggesting the correct value couldn't be read from the aircraft (iFly SDK limitation?), but was wondering if this was still the case for the final version? The workaround suggested was to change the PERF INIT page value mid-flight, but I don't believe that page is accessible once in …

Hi I'me having a problem with Hard Mute not used it before now that I am going to be using UGCX I set up the key d to trigger the Hard Mute but it's not turning the Hard Mute on

This is the first problem I've had with FS2crew. I have PMDG 777 installed with FS2crew. Also have iFly 737 installed with FS2crew. Everything was working perfectly. I installed Aerosoft A318-319/320-321 Pro and FS2crew. Now I can't get any panels to open up on any of these aircraft. All the panels are installed, they do show in the panel CFG file and under vehicle-instrument panel on the tool bar. When I push the N button on the key board, the green band says that FS2crew has started. No panels show up. I'm unable to bring up any panel using the drop menu on the tool bar. I've uninstalled and re-installed FS2crew as well as the aircraft. Still have the same problem. …

Hi, Have been using FS Crew (Voice Edition)since 2011 with my Ifly 737. Have taken a week away from my computer and when restarted the flight Sim, the Voice button on the bar does not come on even after pressing it. The speech recognition is set to US English. The FO does not carry out their functions, though the time clock does run down from 30 mins. Have included the Speech Engine Log. Any ideas? Current Task: Creating the Critical Section Object..., SUCCEEDED! [Unknown Operating System] Microsoft Flight Simulator X Current Task: Creating the ISpRecognizer object..., SUCCEEDED! Microsoft Speech Recognizer 8.0 for Windows (English - UK) Curr…

Hello Support, After purchasing bundle package FS2Crew iFly, version 1.2 (8 July 2011), I installed the version Voice in my FS9. Then I installed the update version 2.3. These are my flight system requirements: Intel Core i7-920 (4 x 2.666 GHz) - 6144 MB RAM with a graphics card: 2 x XFX Nvidia Geforce GTX 295 (1792MB), Windows XP 64bit (gaming edition), Flight Simulator 9.1, iFly 737 version 3.2.2 Before starting my FS9 I first started the iFly config tool and for all aircraft models enabled the voice. At the 1st flight I was doing all right with a CTD at approach of an airport, with the popup message out of memory. This should not really happen with 6GB o…

I have been using FS2Crew on mi iFly 737NG for about 2years with no problems at all. Recently, the program has stopped responding to my voice commands (requests for checklists and operational cmmands-raise/lower gear, lower/raise flaps, heading, altitude settings, etc.). I know my microphone is working as I am able to communicate on Vpilot and the Voice Control option is set in the iFly config manager. FO still prepares flight deck in preflight (when PF button pushed) and announces "Cabin Secure" before takeoff, "10,000 '" and "Transition altitude" and he just announced "Center fuel pumps going off". He just ignores me.

Hello, I noticed that on the -700 the FO is setting the Engine Start Switches to CONTINIOUS for T/O (before Taxi) and for landing (as I think is the correct way to do). On the -800 he is setting the Engine Start Switches to AUTO for T/O and LDG He also doesnt correct me if i read back "Continous" even if Auto is selected Are there different procedures between -700 and 800, or is this a bug? I did some searching and I think it should be on CONT on all models?! Win7-64 pro, FS9.1, Ifly 3.2.something, FS2CrewVoice latest update thanks Stefan

Hello everyone, First of all, what a nice product FS2Crew, it takes some time to learn, but now, i cant fly without. I'm using it nearly a year without problems. This week foor the first time a flight from EBBR (Brussels) to EHAM (Amsterdam) start descending, FSX freezes without saying why, a second time, a third time, problem persists! Using latest version 2.3 voice.... but, i happens the moment you say descent cheklist. I just just skipped this item and went direct to Approach cheklist....found it! Everything works normal. Found on the net that it could be that de airport is very low, indeed Amsterdam EHAM 13 feet. The readback of the FO provokes the cra…

Hi I would like to know if the Ifly 737ng fs2crew works in p3d 2.5. I have used the well known fsx to p3d migraton tool with other addons in the past. I would love to use fs2crew. thx Lee

Ok, I have searched the forums and I did not see anything about my problem so it might just be a configuration on my end. I fly on Vatsim and I use vPilot to connect to their servers. I just downloaded the iFly 737NG Series as well. I have not flown the 737NG on Vatsim yet because I have been learning the FMC and Nav operations. When I used any other plane (CRJ700) on Vatsim and connected with vPilot I didn't have any communication problems thru my microphone, the controllers heard me clearly. I installed FS2Crew for less workload in the 737NG (Which is Awesome BTW!!). FS2Crew works fine by itself and the speech recognition works great and recognizes me clearly wh…

Hi Bryan, I enjoy the Voice Control version a lot and I think it is a brilliant add-on. But I have problems getting the voice recognition to understand specific words, Whenever I say 'OK', it is interpreted as 'open'. I have tried many pronounciations, but always the same. It never understands 'OK'. I also have problems with 'You're cleared to disconnect and go to hand signals'. I have gone through the setup and voice training several times, and on two different PC's but it does not help. Any suggestions ? Peter

Hi Tried posting this in the Botton control forum but got no reponse I have the button control version I bought for FS9 version of IFly 737. Will this work on the FSX version if I install it? Thanks Stephen

The manual "suggests" there is actually a flight tutorial included... but there isn't - just a bunch of Appendices with "Flows". Is there a proper tutorial showing the user the complete procedure from start to finish - together with Actions and Voice Commands relevant to those actions... in the correct order ? Heck, I can't even find a decent one on Youtube ! Even the older button versions had decent tutorials - such as the ATR for example. I realise that all the checklists and voice commands are actually in the "manual", but it is fragmented and hardly constitutes a "Tutorial". One starts on Page 43 for actions, then down to page 50-odd to see what the FO…

Hey all! We all know 90%+ of forum posts are from those of us having some sort of difficulty. I'm wondering how many who lurk here have had absolutely no problems with installation and/or the UI and would truly miss FS2Crew if it... were gone. I'm beginning a home cockpit build that'll be based with the iFly B737 and would love to include FS2Crew! I'm looking for positive feedback. Looks like one heck of a breakthrough here! Tkx! Doug

Hello, I have the problem where my FSX gives a CTD when decending into EHRD. It happens at the moment, when I have called for the decent checlist, and it wants to read the Landing altitude. EHRD is below sealevel, but so is EHAM. But it doesn't crash when I arrive into EHAM. I have installed the latest 2.2a update.

Hi All, It is I, pain number 1, I was recently given a FS2Crew disc for FS9 for the iFly 737NG, I am operating XP and FS2004 on an elderly laptop, I loaded the FS2crew and then updated it to the new version V2 (was that a mistake?) then I installed SAPI which I obtained from the microsoft website, great, I started FS9 and loaded IFly737 in windowed mode (which I hate!) and then checked in the FS9/views menu all the panels all are there and all work except the main control panel which causes black screen, then after a pause FS9 crashes and a message appears inviting me to report the failure, the same thing happens if I click on the centre of the Stby. horizon. I've ju…

Hi, I'm wondering if it is possible to have the FO react to my voice commands while on the ground. I'm thinking about commands to set up the panels, e.g. set speed, set altitude, heading, et cetera. It appears that these commands are not working until airborne. I know it is quite possible to tune these dials myself while on the ground, but am suffering from tendinitis so I am trying to avoid as much as possible fiddling with the mouse. Thanks.

Although I have downloaded and installed FS2crew when selecting the ifly 737NG configuration manager and ticking Voice control I get a message 'FS2crew voice control is not installed' Any help would be much appreciated regards Brian

I'm using Voice vers 2.2, for FS9, while flying the 737BBJ I heard Flight Attendant announcements about closing window shades and another later about keeping the isle clear, while in flight. I never hear those in the other passenger planes 736,737 or 738. I just wondered if that's correct?

Hello, I'm upgrade iFly to version 3.2 and when i'm starting Fs2Crew the software is crash with error: Invalid XGS Patch. Please contact FS2Crew. Error code 0x80070057 I'm trying reinstall Fs2Crew but this not work :( Please help - Piotr.

i have just got it to work the ifly737ng but when i go on to the apron they is nothing there only a shadow and the wheels can you help. thank you

Hi, I bought the FS2Crew Voice Commander Version for the IFLY 737 (FS9 version) a few days ago.Everything works fine so far but I'm not able to get the FS2CREW voices on my USB Headset (Sennheiser PC 36). I have set everything as stated in the manual. I've set the USB headset as my headset audio device in the FS2CREW config panel, I've activeted "HS" in the FS2CREW main window but all sounds and voices only come over my main speakers, which are connected to a Creative Fatality Gamer soundcard.There are no other audio devices installed on my computer. The onboard soundcard is also deactivated in BIOS. I am running Windows 7 Professional 64Bit. I would be happy for any advi…