Voice Control Version

Hello. After doing all the preflight checks with the program in "normal"mode, that is, just talking naturally to the FO the way one would, when it is time to start the engines,I like to go to HS (Headset) mode. Is it possible that when I am in HS mode that the program could be in "Mute" mode,and the only way for further coms would be to have to press a PTT button {key stroke" and hold it down to take the program out of mute? The way I have it now is the soft mute button is the same as my VOX ATC PTT button. That way when I press PTT vor Vox ATC and am talking to them ,FS2 Crew is placed in soft mute mode at the same time. This works just fine,but I would like to have…

Hello. Is it possible to adjust the volume of one or two sound files using my sound editing program? The reason I ask is,I have my rear speakers quite a bit louder than the front ones,and when the F/A knocks on the cockpit door to give me some tea,I all but jump out of my seat. I can certainly turn the volume down on the rear speakers,and this solves the problem,but it of course changes everything else too. I have looked all over for these sound files but can't find them. Thanks for a great program. Dennis

Hey Bryan with the new up comming update in the iFly world I'd like to see a new feature. I love the Pre-flight from cold and dark I would love to have a preflight for the 2nd or greater flight of the day when your not cold and dark.Just to let you know I never had an issue with the FA button on the Over Head panel when pushed like others. Thank you for you wonderful art work!

Bryan with Wilco Evolution released and PMDG NGX release imminent will the iFly be updated to incorporate any 'additional' features found in these other versions?

Hi Bryan,My FS2CREW / iFly has been nice and stable for a long time, but today twice it crashed FSX upon loading, and I got a window saying "Please contact FS2CREW, Error Code 0x80070001".So that's what I am doing....Peter/SAS1376

Does not repeat the flaps 25 but all others, FS9.1 Windows 7 64 bit. The FO does not read back flaps 25 when called but does set the flaps 25.

Hi, I can;t seem to get the soft mute function to work. I've set Backspace as my PTT button in fsuipc and SB4 and gone into the fs2crew folder and chnged the fs2_Main=Backspace and it doesn;t do anything, the FO hears all commands and acts on them. Do I need to reboot after the change? Does backspace need to be all caps? Any advice would be great.thanks,Grant

Hi all! I have a problem!When I select "Run PF" from the CFG panel all the things go right, until the FO comes back in the cockpit after the external airplane check. What happens? The center part of the Primary flight display (the attitude indicator ) suddenly disappears leaving only a black space, the speed indicator and the digital altimeter. Same things happens to the map display just above the CDU. Further, after the take off the autopilot doesn't work, remaining switched off.Any solutions?Hope it's all clear :)Thank you very much!Bye.

Hi all, I'm having a problem with the voice control, if i reply to the F/O running a check list with "Check" it interacts with windows itself and closes Flight sim down :-) i'm new to this voice control and i have followed the Win 7 voice set up as the manual say's any idea'sThanks allJust a note this isn't a CTD as windows voice shows "closing FS9"

Hi,i have a problem with the FSX iFly Version. Everything works fine, except for the FA and RA voices in the preflight phase. Those, when the Stewardess is asking to start the boarding or the ramp agent is telling me that everything is finished. I can hear them, but they are very silent, hard to hear. They react on my answer right(for example "yes" to the stewardess). What is a bit strange is, that the Cabin Announcements work fine, they are loud.Another strange thing : i press the flight attendant button and ask for a tea, the stewardess is silent all the conversation, except the "anytime", after i said thank you. Anyone an idea what might be wrong?Situation: - FO Voice …

Hi,Just moved over fro pmdg to iflypro and had to get ifly voice commander too.Anyways the program is superb,just the one issue and only with ifly737 not the738, asthe title sais the fo dosnt turn taxi light on.Any ideassteve

Hello,Perfect add on. I cant fly anymore without it.I have made many many many flights with iFly/Fs2crew for FS9.However the last week I had 2 CTD's.1) The first occured when I called the FO to set an altitude on the MCP while on the approach. Have in mind that, I was in circling procedure in the downwind (didnt select circling on the fs2crew menu-I never do :) ). I started the approach in the ILS and then exited the ILS approach at 1500 ft in order to do the circling. Also, during the ILS approach hitting HDG on the MCP didnt worked to exit the localiser (i dont know what the heck happens in the real thing), and I had to cycle ON and OFF the FD. I exited the ILS and whil…

Hello,after takeoff and when calling "gear up", i get a continuous looping for the F/O of "gear up". It usually disappears after the command "After Takeoff Checklist".The second problem i have is while in the landing phase and selecting Flap positions, quite often the F/O will select other flap positions, usually backwards eg. i call "Flaps 10", the F/O acknowledges and selects the flap, but a few seconds later the F/O, this time uncommanded calls Flaps 1 and selects it.Any ideas?Below is the CVR log.Apologies for the double thread, for some reason the last one just refused to let me cut and paste the CVR log.Cheers,AndySim Clock (05:03:02) - Captain: landingSim Clock (05…

Hello, i have a little problem regarding the Phase-Switch from Approach to Landing. I always have to do this manually. Can anyone tell me the Trigger for switching from Approach to Landing Phase? Perhaps i can solve the problem then... Greetings, Sebastian Beier

I'm not sure if this is specifically related to online flight, but this is when I noticed it. I flew from KMSP-KPHX on VATSIM using SquawkBox 4, and FSX. Everything was working perfectly during the startup/taxi/takeoff stage. There were no controllers online at that time and I had no problems. About 100 miles from my TOD, I got a call from Albuquerque Center to contact him as he was now online. I dialed him in and was told to "descend at pilots discretion" via the published STAR. As I was currently flying along at FL360, I had previously told the FO to set the dial to FL310 before being told to descend (per charts and FMC readouts), but after I was told to contact him. Th…

Ok, what do I need to do if I don't push the pre flight "Run PF" button? Can somone tell me what to do then to get the program going. I can't find it in the manual other than it is optional to push that button: So my question is, I dont push the button then what do I need to do not only for the FScrew program but for the 737 itself, do I load a different panel setting, what? I tried to move on without pushing the PF button but no timer, not sure I have the jet configured correct for the events that will take place. Any help would be appreciated or a page number in manual if I over looked it. Thanks,David Hawley

Been putting in quite a few flights and can safely say that this version is virtually perfect. Only have one small issue and a separate little niggle to ask about.The issue is that every single time upon touchdown, the FO announces that the "speedbrake NOT up". The problem lies with that fact that the speedbrake is in fact deployed each time so his report is incorrect. Spoilers are armed before the landing checklist and he accepts that they are armed during that checklist. I have the spoilers configured to a throttle axis through FSUIPC so suspect that there may be an issue somewhere here as I know the iFly spoilers are handled slightly differently to other addons.As for …

HiHope you can help resolve this one..I use dual monitors, and the product 'Actual Window Manager' which has some really nice features in terms of placing windows where I want them, i.e. sending the CDU to Monitor 2.I have FS2crew for Maddog and iFly. For the Maddog version everything is OK.For the iFly version, FSX crashes when I undock the FS2crew control panel. If AWM is unloaded/stopped, then I can undock the window just fine.So there seems to be a conflict between AWM and the iFly version of FS2crew ?Any ideas - suggestions or workarounds ?For now, I just leave the panel docked, but I would like to move it out of the way to Monitor 2. Otherwise, FS2crew for the iFly …

Hi, to you all, Two days ago I bought FS2Crew 2010 iFLy 737NG Voice Control.When I look to the manual and compare it with the mainpanel I have, there are two buttons missing. Looking into the forum, no one is mentioning, so it must be a problem at my side :-(As you can see below the SK and PWR button are missing in my FS2Crew. Does anyone can tell me what I can do to correct this please?Thanks and regards,EdThe buttons in the blue circle are the buttons I am missing.

hey alllove the product and love how it adds a lot of realism to the iFly737NGjust a few small things i have noticed i use a button on my X52 with FSUIPC as a push to talk kind of thingwhen i push the button the soft mute turns off and then when i let go of the button it turns back on again...this is useful to me as it stops me from issuing commands when i don't need to ect... the problem i have is that when the flight is complete and you hear the ping from the FA i say YES and she says slides are disarmed ect i then wait a few seconds and then the ground crew contact the cockpit at this time it automatically turns off the soft mute the other little problem i have is that…

I installed ifly 737 FSX or windows 7 64bit and all work fine.When i find to install fs2crew, voice or button are the same, i receive the error show in attached file The installer was run as administrator AUC Firewall and Antivirus disable. Fs2crew for ifly 737 bundleFS2Crew on line store Order #16884 Date: 20th May 2011

Hello everybody!I have a strange problem with FS2Crew Voice edition of the IFly 737 FS9.Everything functions perfect. Set headings or altitudes on MCP? No problem. Set frequencies on nav or com? Perfect!There is only one thing, that the FO doesn´t get right: The FO can´t set the flaps. If I call for takeoff flaps after pushback ("Flaps five"), he reacts on my command as he should ("Takeoff flaps set"), but the flaps maintain retracted. Same thing happens after takeoff and before landing. The FO always reads back my commands, but the flaps don´t move even one inch.I would assume, that there must be a wrong shortkey-setting, but the Ifly-version seems not to use shortkeys …

Strange thing, - Either I say a command and I get repeated by Flaps 10 Flaps 10 Flaps 10.- Or saying nothing and FO issue Flaps command.- The only thing I found a solution to it is to say a command, FO acknowladge and immidietlly press HM (hard mute) Otherwise I should expect a surprise command issued withpout saying a thing. Now, it might be that the mic is too sensitive, but I cant find correct settings for it... Anyone experienced same things

Hello Bryan, Just downloaded this update. Do I need to uninstall the previous version, prior to installing V1.2, or can I simply install it over the previous version? Thanks for an answerRegards, Henk

Hi Guys,Long time 737 flyer 1st time FS2Crew user.What a fantastic product...well done! So close to the company procedures I use it's not funny. Now a couple of cheeky requests..1. Any chance of Aussie accents?2. Any way to re-record the trigger phrases for some things such as "500ft - Stable" instead of "500ft - clear"?3. Any way to tweak the flow by syntax? For example the APU is not started vacating the runway but rather when it's asked for (fuel saving measure),As I said...cheeky requests. No big deal if they are not possible as it's still a great product.RegardsGreg