The Wilco/FeelThere A320 Edition

I downloaded the config file you provided and made sure I put it with the right plane.When I fly the 321 and select 321 in the departure briefing, I get a sound error message from fs2crew and the breifing won't play.Also, I can't click to open the panel where you select alt crz. It's not working.Any help would be great thanks.

i cant find in the piot's guide.How update the -Sids and the statrs ?Thabk you

Hi all,I own the fs2crew products for the ATR, 767 and 747 -FS9-, and I just have words of admiration towards Bryan's work. All these planes had pretty good flight models, as real as it gets within the limitations of FS9. Now, I am digging into the A320 forums, and I found quite a number of complaints and some workarounds to avoid, for instance, excessive VS, like -citing-:"Climb out manually after take-off at about 15 degrees nose up. Keep an eye on the pitch as it will increase as your IAS increases. At thrust reduction altitude, bring your nose down to about 10-12 degrees nose up. Do not pull your thrust levers back to CLB just yet. If your IAS goes above S-speed, sele…

Hi,when I use FS2Crew with the A320 CFM the rudder is always full to right. When I touch the controls the rudder will react as desired. But after half a second or so the rudder will go full to right.This effect is only on CFM version. The IAE version is correct and brings fun...What's going wrong with the CFM?Best regardsKarsten Pohl

Hello Bryan,Fs2Crew for FT Airbus A320 is my first Fs2Crew product although I fly all of the aircraft that you support (ya, I know, I'll have to make amends :) )I really, really like it, it complements my other add-ons perfectly (RC4, AES, FSFK). Apart from a few quirks which are probably operator (me) faults, all is working perfectly. I have a question, but it's not terribly important: is it possible to include SIDs and STARs that I actually use on my flights in DB and AB or is that hard coded into the program? Thanks for a great product, looking forward to get me hands on the other versions soon. :)Regards,Jure

Hi,I am using a CH Yoke. I assign green to Button 9 (a button on top of the left handle) and red to key "Q". Sometimes Button 9 works, sometimes not. Sometimes button 2 (left trigger assigned to brake) somehow becomes red command (usually after the braking test at the start of taxi). I have changed the FSX assignments to make sure the button and key were assigned to nothing in FSX. I have had this happen several times. I have previously assigned these keys in FS9 for FS2Crew Level D without any problem.I am also wondering if there is a problem from assigning one key to red, but no key to green, and assigning one yoke button to green, but no yoke button to red.Any id…

Hello...first... the A20 Edition is so great ! Good Jobbut , the last 3 or 4 Flight , i fly with the A319.Today i change to the A320 in the Aircraft Selection , but the FS will not load the Airbus. It comes every Time the Failure "acrew0.gau" or "dcrew0.gauge". I habe reinstall the A320 dition and it works.I make a fly with the 319 and change after that to the A320 , and it comes the self Failure. Reset the Panel.cfg and Gaugesound.dll will not help.any Idea ?greetingsJ

Hello,All works fine when in VC. However, when I start up- in 2D and whenever I go to the 2D screen the mouse updates at a very slow interval - unusable in the 2d screen this way.Any ideas here?Thanks,Ron Sagel

Hi BryanThanks again for another outstanding product, been waiting for you do to an airbus. Many thanks.Warm Regards Jason

Installed FS2Crew for A320 this morning...all went well, no problems during installation...when I start FSX I get the opening screen then a smaller screen asking me if its ok to run this FS2Crew software, but my mouse hand never turns to an arrow so I can select "always..." and then the program CTD. I am running XP with FSX (not SP1) ....helpJim

Bryan,I use UK2000 scenery in FSX/Vista. Last night I did a flight from EGKK to EGPF and all went perfectly well (apart from my flying).This morning, I have on several occassions, tried to make a return flight from EGPF to EGKK. Everything goes well until pushback commences.The tug pushes, turns the tail right and then basically keeps on pushing me out the apron, through the buildings, trees, parking area and through the fence.I've tried everything I can think of to stop the pushback back nothing helps.Any ideas?PS I've asked for my forum password to be sent to me on a few occassions now, but I don't know if I'm not receiving this through the new firewall, etc. Any chance…

Is it possible to change the Fuel sheet and TD card to Imperial units?Dave F.

I seem to be having problems with the new A320 Software.Everytime I try and load the aircraft, Flight sim crashes and returns back to windows. I have four of your other products which are all great.My setup is the fs9 stup with your products for pmdg 737, pmdg747,level d 767 and the atr edition. All these products work finePlease could you give me some adviceMany thanks

HiY just got the FS2Crew A320 and it looks like it only works for the A320, not the A318 A319 ACJ and A321. I know sombody askt about this befor it was realesed but the forums seem to be cleand up so I dont rember what the answer was.Thanks.

i cant find anywhere in the fsx select aircraft a320 i just have a321 and that stand that i cant pick that unless i have updated them and i dont know how do do it but i tried the a321 and nothing work can you pleaze help mewith regards Andri

Hi Bryan, excellent work! I just did 2 short flights and I am astonished! It makes FS so much better!Thanks! oh, and yes, it is easier to learn than the ATR or 737NG version...Abraham

Hi the product is great im having 1 problem, when i get to around 15+ on dep time, i have squawkbox running, its werid its like none of my keys work and i cant access the FS menu or do anything with my keyboard the game hasnt froze or anything and i can do alt+tab back to desktop and works and i can type to someone on vatsim in squawkbox but i cant do anything else none of the keys work can anyone help, i havnt ammended any keys at all in FS

Bryan,read your reply and no I don't get any error message before CTD.I have now managed to get the Airbus to load with FS2crew in 2D panel, however, when I change over to the 3d VC I have nothing from FS2crew.The FS2crew panel simply dissapears, but at least it's another step forwards.Any further suggestions would be gratefully received.Thanks againWillie Goldie

I am running FSX on a Vista system. I installed it. Changed the joystick assignments in the Start Center. Loaded FSX. When I selected the A320, it first asked permission to run FS2crew (as normal), answered 'yes', then it asked whether to trust the FS2Crew (as normal), answered'yes'. It then locked up and gave a message saying "Microsoft Flight Simulator has stopped working" and gave options to check online for a solution to the problem or close the program." Every time I tried after the first time, it crashed in this manner every time I selected the A320 (any livery). I rebooted, restored the joystick default settings in the Start Center, no help.Here is the detai…