The Wilco/FeelThere A320 Edition

Dear A320 Owners:A new update is available that corrects a few outstanding issues.Please download from here:A320 Edition Updates PageNote: This update is only for people who the A320 Edition of FS2Crew (this version is no longer for sale as it has been replaced by the Airbus Special Edition).If you own FS2Crew: Airbus Special Edition, do NOT install this update.All the best,

Wilco/FeelThere A320 Edition Troubleshooting and FAQsNotes:1. Make sure your Wilco/Feelthere A320 is fully functional before installing FS2Crew. Do a test flight first. Do not buy the A320 and then immediately install FS2Crew without doing a test flight first. That's common sense, but it is a good reminder.2. As always, be sure to read the manual. The manual is available via the Start Center.CTDs:1. Make sure your joystick is plugged in. That is a must.2. Make sure in FSX the cockpit is set to load by default using the 2D cockpit, not the VC cockpit.You can use the VC cockpit, but make sure the aircraft loads initially using the 2D cockpit.3. Unless you've installed …

I have been using the CH Yoke with CH Rudder pedals and had some problems in the past.I have been doing some beta testing for Bryan and have read where other members were having problems setting up the buttons using a CH yoke.The easy answer is download the newest version of CH Manager from:http://www.ch-hangar.com/Make sure that you remove any assignments for buttons 3 and 4 (or whatever you decide to use from the FS2Crew Green and Red button) which are the grey toggle on the right hand yoke as they will be for the default red and green for the program.Please make sure that you calibrate the yoke in the manager program, not just Flight Sim 9 or FSX as it will not work.If…

Hello, I like to fly the aircraft manually, especially when landing, but everytime I try it the aircraft noses down. While I maintain horizontal flight there is no problem (although fly by wire doesn't keep the pitch with the joystick neutral), but once I start descending the aircraft insists in nosing down. I have to pull the joystick backwards to maintain the pitch, more and more, up to a point where I crash or it is not possible to flare. The only way I have found is to start the descending automatically, and switch to manual once stablished and stabilized, it works then, but I'd like to fly whole manual landings (a visual or VOR one, for example), but it's i…

I can not get the plane to respond to the AP after takeoff...the light comes on but the plane will not respond to the AP...no lateral, speed, or VS commands are being regarded by the aircraft...ive flown this plane for many years and not seen this before...any ideas?

I've had the Wilco Airbus for a few years now, and something has bothered me about its TCAS system, but I'm not sure if it reflects the real thing or not. If I'm correct, if the pilots and ATC are following the correct procedures with adequate traffic advisories, the audible "TRAFFIC! TRAFFIC!" alerts should really never happen in flight. They should be for threats that require immediate attention, which should never even happen anyway because you should have already done whatever needed to be done well ahead of time. On the Wilco Airbus, I'm often getting these audible alerts when both me and the other aircraft are in level flight, with a vertical separation of, …

Hello i have a Weird Question , first watch this video you saw how the spoilers extended Literally Quickly ? I mean not like real a320 the spoilers extending slowly slowly after touchdown i know this is Silly but can i change spoilers Extend speed in wilco A320 ?

Hello, Wilco FeelThere AQ320: Please could you let me know how to go out of an "Holding pattern" and continue to the next way point. If I delete it, FMCU delete all the next waypoints Thanks for your help Michel

Hi Bryan... Im back to getting airborne after many years of not flying and I'm confused by my programs saved. I have just re-installed Wilco Airbus Vol 1, (FS9) and on file i have Wilco FS2C airbus edition, and FS2C Wilco Airbus SE. Which should i be using? (or both) and advice would be appreciated.. Cheers. Liam

Hello guys. How are you? I need your help.My problem is this:When I turn my switch for Weather radar to ON,my weather radar is not appear. Please help me Thanks a lot Theo

Hello, I have the wilco airbus Vol 1 and Vol 2 (from August Downloaded from the wilco website) . ON my PC there are FS 9 and FS X in different Partitions. In FS 9 the wilco airbus Works Fine. In FS x there are Problems. The airbus doesn' t climb After Take Off. Waypoint 1 2000 Feet, waypoint 2 4000 Feet. Altitude At The Autopilot is 10000. but the bus does Not climb. The bus is in 2000 Feet fixed. I tried to use the Manual climbrate , but first nothing happens if i push or pull and when it is possible, it changed from +500 to -100 , no other possibilities. If i disengage the Autopilot and engage again the next Problem is the Speed. I have overpeed. The Speed from the FMC…

Hi guys I'm sorry but idon't know if this is the right section! Do you know how to set the "flex to temp" in the A320/321? Which calculating you must do in big lines? For example i understand that one thing to consider is the external temperature. More high it's and less you must set the value of flex to temp. Sorry again for my English, i hope it's clear

Hi,Recently after many good flights I loaded my Wilco A320 once again. When I loaded it, it was cold and dark....however, there was nothing I could do to give her power. The first thing she needs is battery power right?...Well in my case thats impossible. When I click either Battery 1 or 2 on they spam on and off. I don't know why. I recorded my problem here: I've tried re-installing Wilco and it maintains the problem. Theres a high chance re-installing FSX would fix this problem, but I have so many additions to FSX that this one aircraft would really not be worth the effort, I'm sad to say. And if I were to reinstall FSX, how long would it be before I have the same is…

http://forum.aerosoft.com/index.php?/topic/49292-airbus-x-extended/page__st__2640#entry393715

Hello all. I seem to have a problem with my A320 series. Whenever I exit a flight, my simulator just freezes, except when I right-click its icon on my Quick Launch Bar and select Close Program. It interacts with that dialogue only, and if I hit no, the simulator becomes a brick wall again. I tested the panel with another A320 (Project Airbus), and got the exact same result. What can I fix with this airplane to make the simulator not freeze? I have included a screenshot of my simulator after flight to help with solving this problem. Regards, Kyle

Has anybody else noticed if, after setting flex takeoff power, the elevator trim suddenly shifts to a very high (5.0) nose up value.Is this a FS2CREW thing or a Wilco/Feelthere issue

Hi BryanIs it possible for you to do a small "patch" to make the RWY COND, FLEX/TOGA and MACTOW/TRIM settings editable - since i'm using the TPC config tool for these values.I use this tool because the FS2Crew tool is sometimes setting the RWY conditions wrong after reloading a previous flight. Meaning if the RWY condition was WET or CONTAMINATED when the situation was saved it will "resume" this condition upon reload.also values are dependable on other things like temp, rwy lenght etc.Best regardsJesper

Hiya,I've recently bought FS2Crew for the A320 and after managing to get it to work with help from here I've been enjoying using it. However the voices of the crew are American. Is there a British voice set available at all? the ground crew appear to be British. I did try searching under British voice sets in this forum but nothing came up.thanksRory

Hiya,I've just bought and downloaded FS2Crew for the Wilco A320. However, I have the Just Flight version of this aircraft. Does FS2Crew work with this, or is it supposed to? Perhaps I should've checked first before buying. I've loaded FS2Crew onto my pc but when I select the Airbus A320, FSX just hangs then an error comes up saying its stopped working. Of course, the aircraft works fine normally. Using FSX and Win 7 64bit.Any advice appreciated.Rory

Hi, I noticed that the passenger weight used in the airbus load manager is 75kg. I think this value is wrong because the EU OPS 1 document states that for aircraft with more than 30 seats all flights except holiday charters must consider 84kg of weight for all adults (male or female). Is there any way to correct this value as it can be done for the PMDG for which there is the possibility to modify the seatweight value in the loadmanager.ini file?Thanks

Hi Bryan Any chance of a Voice package for the Airbus series I have got all the voice packages love them. Johnney

Hello All,Here is an interesting problem for all you troubleshooters. I have the Wilco A320 and love it!! But, started running into problems last week. My engines will not start. I'm not sure if I hit a button some where I should not have. But my engines will not start. I am in intermediate mode which means I need the APU to start them. I do that , but they will not start. They sound like they want to but I get no indication on my engine panel that they are running. I recently installed the FS2Crew program, but other than that I am not sure what to do. I dont want to unistall anything so I am hoping that maybe someone out there knows what is happening..... this is …

The panels on the IAE 320 come up white and the throttle panels come up pink. Oon the body of the plane wherever their is a light like the tail it shows up white. I have uninstalled an reinstalled many times and I have deleted all the airbus files i could find and reinstalled with the same issue.Image 2image 3

Hi i enjoy flying the PMDG 737 but am interested in the wilco airbus the only problem i have is with the FMC. When i programme departure SID and STARS it goes direct to each waypoint and doesent curve to waypoints like the PMDG i was just wondering why this happened and if i could do anything to change it.Thanks chris harwood.

I have FSX installed on windows 7 x64, together with REX, ORBx extensions and OZx addons along with dozens of airport ORBx addons.I use the Wilco Vol 1 and Vol 2 airbus mods.I recently tried to install FS2crew but after installation, while trying to select the A320, i get CTD. Uninstalling FS2crew reverts to perfect functioning.Cant figure out why i am getting CTD.