FS2CREW: GENERAL FORUM

Hi team, I am not sure if this question has been asked before, and if it has, I apologize. The Maddog for MSFS is in beta testing right now, and something tells me that it will be released soon. Are there any plans to implement FS2CREW for this airframe? Thanks

Not sure what is happening. I used it the first time and things worked great but last 2 times using it. I use voice and calling for check's and recognized what I said at the top of screen show's that I said it. I am sure this is a user error. But I call for pre-start check and shows I said it but it doesn't do anything I manually have to go and force it to do it. Also I noticed that it said knowing state of aircraft and said "off" I can't find that setting to to allow it to know the state of the aircraft. Any help would be much appreciated.

FS2Crew friends, The weekend update has been deferred to next week. However, multiple FS2Crew MSFS products were released recently. Please use the Product Manager to update. I will publish the change log when I get back to my main computer late this week. A new ugcx update is also coming out.

as above can the new crj crew be run in vr so you can see the panels? Thanks Mike Hazzledine

It was a big week at FS2Crew! 1. MSFS Aerosoft CRJ: It was released a week ago, and it has been very well received. Thank you for your support! A few bugs were discovered post release (as is the case with any complex software) and we fixed them. Please update your FS2Crew Aerosoft CRJ MSFS product via the FS2Crew Product Manager: https://fs2crew.com/downloads/ FYI, we have another smaller CRJ update coming out soon as well. 2. FS2Crew for the FBW A32NX: We just released a fresh new update a few minutes ago. Again, please use the FS2Crew Product Manager to update. 3. MSFS RAAS and PBE have also been updated. Change logs…

Hi Bryan I get this message fs2crew p3dfsc all access installer has stopped so i can't download any products any ideas please?? Brought from Aerosoft Thank you David Palmer

Dear FS2Crew Friends, The long -long!- wait is over. We finally released FS2Crew for the MSFS CRJ! I know a lot of you have been waiting for a competent crew simulation for the CRJ for a very long time. Well, it's finally arrived 😉 Apologies for the delays on the CRJ, but we wanted to establish a system as perfect as possible for MSFS before releasing the CRJ. We achieved that goal through the FBW Airbus version and its numerous updates. Everything with MSFS is new, and our MSFS products are no exception: they represent a massive step up from our FSX/P3D products. If you don't know what FS2Crew is, we make airline crew simulations for the …

Hi! I just bought and installed FBW A322NX for MSFS. It start as it should when I select Launch Application. However, when I click Open App Panel, nothing happens. The panel stays blanc. Making the app unusable, as I exclusively run my sim in VR. I don't use or wish to use a mic. Only button control. Is this a known problem with a known fix? Thanks Joern

Weekend update! We were hoping to release the MSFS CRJ version this weekend, but, alas, we had to pull up and go around. There are still a couple issues we need to nail first. Sorry for the delay, but it's better for me to wait a few days than to release early and get support tickets! Don't worry, any day now! Cheers,

This will be a short update! We're working on trying to push the Aerosoft MSFS CRJ version out the door. Goal is next weekend, but there's always a chance it could slip depending on how well testing goes!

Since I get asked about this all the time, I'll post it here so all can read. I know a lot of you are chomping at the bit for an FS2Crew for the upcoming MSFS PMDG 737. Of course, I couldn't say anything because PMDG released no official word on the all the mighty SDK. But now, cometh the hour, cometh the Man, RSR has spoken publicly in his forum about this SDK. I quote: So long story short, there will be no SDK on initial release, but at some point down the road we'll have one. When? Who knows. Maybe sooner. Maybe later. It's up to our friends at PMDG. Could we bypass the SDK? Yeah, probably, but we won't do that be…

I seem to have two problems with my new version of fs2Crew for 737ngu. 1) ever since installation the Mute button don't seem to respond, not by direct mouse control nor do the hard & soft mute after setting up the appropriate controls. 2) The microphone only ever worked once upon testing then stopped after exiting P3D and returning after a few hours though it works perfectly with ATC. Any idea of what I could do to identify the issue ? Many thanks for your support. Regards Maz

FS2Crew Weekend Briefing! This will be a short one! Only news is we're working full speed on the Aerosoft CRJ for MSFS. It's doubtful we'll be able to release the CRJ before the end of February (our excuse - it's a short month 🙂 ) , but we're getting very close. In the meantime, here's screen grab I just took of the FS2Crew on-line map showing on-line users using our MSFS products. Busy day over Europe!

Hello, I've just bought fs2crew FBW and I would like to know in the list of flows/actions what are : - the flows/actions triggered from manual actions in cockpit - the actions in cockpit automatically triggered by the button control (or associated shortcut). Because I have both behaviors and dont understand the logic.

Hello :-) I have the following problem. I use the P3D V5.3 with the HF2 and the Voice Control Fs2Crew for the PMDG 777. After the start of the Flightsimulator everything is running normaly. In the Sim... I can use the Voice-system without any problems. I can speak to my Co-Pilot ;-) and he gives me answer or i can call the FA for a drink :-) So now here comes the problem. On a flight... if i turn of my headset for a minute or a while... stop my voice-system and i can´t spek to my co-pilot or to the FA. No chacklist are read or no more entries accepted. Only i can do is switch to the bottom control. I re-instal the program 3 times but…

Hello everyone, Fs2crew installed for P3d 737NGu, after following instructions upon pressing the assigned key the FS2c panel does not open. Checked the P3D config file and don’t see any, so said, entries for FS2Crew (don't know what I would be looking for specifically) I have re installed the app and restarted the PC but no changes. Major help needed for fixing the problem. Thanks Regards M. Andreini

I recently bought the above product and I got the FS2crew product manager on my downloads (orders). I have run it and nothing seems to be downloading at all. Roughly how long should it take? Am I required to take another step, I was actually only interested in the NGXU for now.

Morning, If anyone from FS2CREW reads this forum, can I make a suggestion that you change the units on the downloader? The "Downloaded" figure is showing in MB/s and the "Speed" is in MB which are the wrong way around. Nothing functionally wrong with the app, just thought I'd point it out so it could be corrected in future releases if any.

FS2Crew weekend update for 19 Feb 2022! Are you ready for the brief 😉 1. We're going full speed on the Aerosoft MSFS CRJ! That's our primary focus right now. Goal is to have something out by the end of the month. Please don't hold us to that! But we'll try our best! 2. PMDG 737 for MSFS: Yes, we'll be supporting it! The wildcard is the SDK. In the past PMDG only allowed 3rd party developers like FS2Crew to interface with their plane provided we used their dedicated SDK. So, long story short, of course we will support the 737 in MSFS. But we're probably going to need an SDK from PMDG first to do it legally without PMDG's legal team getting on …

FS2Crew Friends, This will be a short weekend update! We're working full speed on the Aerosoft CRJ version for MSFS. We hope to have it out later this month. In the meantime, we've also released a small fix for the FBW A32NX version of FS2Crew. https://fs2crew.com/fs2crew-fbw-a32nx-change-log/ Please use the Product Manager to obtain the latest version: https://fs2crew.com/downloads/

FS2Crew Weekend update! Work is progressing full speed on our new crew simulation for Aerosoft CRJ version for MSFS! We are "hoping" to have it ready by the end of the month. Key word "hoping". We at FS2Crew would like to thank everyone for their massive support since the launch of MSFS! Here's a screen grab of our on-line user map, showing our MSFS products: RAAS, FBW A32NX and Pushback Express users! Enjoy your weekend!

I have fs2crew installed for the MaddogX. After loading P3D, under "vehicle" the fs2crew main panel appears when I run the MD82, but is missing when I run the MD83 or MD 88. I have verified the fs2crew box is checked in the load manager for the 83 & 88.

Hey guys, First off fantastic job on all of the FS2Crew line. It really adds another dimension to the sim, Just did my first MSFS 202 SU8 beta flight with the FBW and PBE/FS2Crew and just a few quick notes: Ran into an issue at pushback with PBE recognizing but not engaging the tow at pushback. So, it connected when I asked it to but wouldn't push. I also noticed a few flow errors....for instance the after start checklist didn't engage as per usual and the approach checklist flow didn't either. I also noticed that FS2Crew didn't pick up on the seatbelts being on/off. Just some small stuff that probably requires a little tweak. Not …

As the title suggests, there is an instruction manual Thanks

Hi guys, I hope you can help me here. I installed the Command Center as I bought RAAS. Everything ok. In the settings I deactivated Auto run. Nevertheless, the COmmand Center keeps poping up after every Windows start. Any clue what else I could do? Thanks a lot!