FS2CREW: GENERAL FORUM

Wilco Airbus Evo and installed, but corrected panel.cfg remain in the background pop-ups, fsmaps too. A help please. thanks

Hi there, Before i post my problem, let me first say this is the first time i ever use FS2 crew and i have to say it gives airsimming a complete new level, i really enjoy it, keep up the good work! Now the things i've noticed is that, when the aircraft is climbing and after set the BARO REF, the NOW call out comes at FL100 instead after the BARO REF is set to STANDARD.. The other issue is that when you are going to be in DES, if its OP DES or MANAGED, when you reached 4000 ft below your INIT ALT, in this case it was 36000, the COPILOT is already calling out that you are at 10000FT which isnt because i was nearly at 32000ft and when im flying a flight with an INIT…

I finally took the plunge after reading a lot about FS2Crew and bought the Jetstream 41 version. Yes, very nice and adds that little extra to the sim experience. But, I'm suffering from possible 'dumb question' syndrome - i.e. I think I'm about to ask one. Step 12 of the manual explains how to start a flight with FS2Crew using the RUN PF button, at which point the clock starts and the FO begins his duties. It also says this is optional, so OK, what if I DON'T wish to use the PF button, i.e. I've loaded a flight into FSX in which I previously landed at Liverpool airport and now wish to pick it up again as if I'm just turning the aircraft ready for the return leg with f…

Questions time at FS2Crew: FS2Crew Airbus Voice Control or Airbus Button Control for the Aerosoft Airbus X Series. Which do you prefer and why? Best,

Hello Simmers, I want to use my Aurbus X V1.15 together with FS2Crew button version. But whenever I try to start my FSX it crashes. By checking reasons I get the notice that the following file caused the crashes: FS2CrewAirbusButton.GAU_unloaded. I cannot get behind the starting window meaning that the whole FSX does not start at all. When I uninstall the FS2Crew, everything works fine. Any suggestions what`s going wrong here ?

Any chance fs2crew will be supporting this aircraft?

I purchased the Aerosoft Airbus Extended which includes a locked version of FS2Crew and have just reinstalled the latest version of the Airbus V1.15. In the airbus configurator FS2Crew is disabled and when i try to select the voice or button control option i get an error message telling me that FS2Crew is not installed. When i run FSX with a Airbus selected i get a ticker tape option at the top of screen showing that FS2Crew is operating and the first officer is doing his checks, I am happy with that but am curious to know does the locked version not include voice or button control.

Hello, somewhere in a forum I read there'd be a possibility in the future to use fs2crew voice/button control to interact with fsdreamteam's GSX pushback function. Has this option been cancelled or is it still likely to happen? I'm very interested in this, would also be nice to have on PMDG's 777. Regards Max

Check it out! http://forum.avsim.net/topic/422203-button-control-has-been-released/

Hi FS2Crew, I've used FS2Crew with wilco 737, wilco airbus, the LVL-D 767 and Flight1's C172 with FS2Crew (FS9 versions) Now that the probably most comprehensive and complex GA aicraft for FSX ever is out - A2A C172 - what do you think of talking to them about a new version of FS2Crew? Kind regards, Alex

Dear Forum Looks like I have lost the click spot in the VC. I have read previous posts and it is likely that the gauge entry for that clickspot was deleted whilst running the PMDG Performance Manager. I have un installed FS2CREW and re installed it. However the situation is still the same. Can anyone help me restore the clickspot on the VC? 2D seems OK by the way. Thank you for your help Best Regards Mike

Gents, With the release of the PMDG 777, the discussion about OOM errors in FSX has resurfaced (even though the PMDG 777 has no memory problems based on my tests and only uses up a bit more memory than the NGX!) What's an OOM? It stands for "Out of Memory". In plain English, FSX has a 4 GB internal memory limit. 4 GB is equal to 4096 MB's. To make it even simpler to understand, think of FSX as being like a big refrigerator. If, though a combination of add-ons scenery, airplanes, AI traffic and weather that run 'inside' the simulation (the refrigerator), you use up more than 4 GB of memory (space), your FSX will shut down. In other words, you'v…

Is there going to be much of a change Moving from the voice control for the ifly 737 to the. Voice control PMDG?

Attention PMDG 777 pilots, please see this thread: http://forum.avsim.net/topic/420251-777-contest-now-on-sign-up/

So I have noticed a little problem when I use FS2CREW and PS PASSENGER X. I have max realism set in FS Passengers and there seems to be conflict in procedures on the ground regarding the strobe light. FS Passengers demands that the Strobe Light be set to STEADY when entering the runway for take off but my FO in FS2CREW turns it to STROBE when entering the runway after calling for Runway Entry Procedures. Who is right? Is the strobe suppose to be solid or flashing when entering the runway? It costs me 30 points on my score every time I take off if I don't go over to the light panel in the 737 and flick it back to Steady.

Apart from going over to Button Control, is there a way to disable the speech recognition text strip in Voice control mode? I really don't need it to repeat back to me what I said. Either it's going to take what I said or not. I don't want it there because every time is comes on my entire screen flickers because I am running with SweetFX and PMDG 737NGX. Any time a text message pops up on a green ticker tape box I get that horrible flickering for a second. Makes recording video a bit ugly. Thanks.

Hi all Just getting used to the FS2Crew (voice)with Ifly 737. let program go through pre-flight but I cannot contact ground for pushback sequence. It is set in config to have pushback correctly. When I transmit "cockpit to ground" it shows up in the display but there is no response from ground? I understand that there may be an inter-phone switch on the Ifly but I cannot find it ?? I opened radio panel and tried all the mic switches there but no luck? Any help would be appreciated. Thanks Norm

Hi all: I own a copy of Airbus extended. Nice program. Was glad to hear when FS2Crew came out with a version for the airbus. I purchased a copy on 08/27/2013. Downloaded the files and did the normal install. Nothing. I checked forums, and found the configurator. I get the message that panel config. file not found. I check windows explorer and the files are there. What is not there are the FS2Crew files. One forum suggests uninstall the aircraft, then re-install. Can't find re-install files. HELP!!

Hi, most of your installers create shortcuts to a few PDF-Files on my desktop. But personally I don't like anything on my desktop and have to remove them all manually. Is there a possibility in adding a no-desktop-shortcuts-option in your installers for future product/updates? Or any other idea from preventing that? Thanks

Afternoon First off please excuse my ignorance of this I am fairly new to the whole fsx addons I have seen a recent video on you tube where the user has fs2crew running on a flight. I was amazed at the addon and how it enhances the experience My questions are the following I currently fly mainly the 737-800 planes in fsx. I have about 50 reskins for this model. What fs2crew package do I use to get the crew sounds. Alternatively if I buy the gold edition does this cover all my fsx aircraft? Cheers Mike

Hey, I'm French and I usually use aircrafts like the PMDG 747 or the PMDG 737 NGX and also the Airbus X Extended.. For the 2 first i'm using Fs2crew button version and I'm currently waiting on the Airbus X Extended button control version. I was wondering, if it could be possible to intergrate a french crew ?! Espescially for the PMDG 747 and the Airbus X Extended as I use Air France a lot, having a crew doing the announcement in french and english would be very cool. We don't need the pilots to speak french but just the rest of the crew, and same thing for spanish crews, or german crews.. etc. Or is there a known add on who can provide me this realisim ? Ps: Thanks fo…

I notice that whenever a new version of an FS2Crew is released and we go back to our completed orders to d/load and install over the existing version, each time our permitted number of d/loads is reduced by one. Is this fair? Especially when we are not re-d/loading because of anything we did. Just a thought in the interests of fairness. :rolleyes: Iain Smith

Gents, FS2Crew for the Aerosoft Airbus X is now available for download. This is a Voice Control product. Button Control will come later. Click here to visit the Sales Page! For product specific questions, please visit the dedicated Airbus forum in the FS2Crew forum! Best,

Has anyone seen or heard an update on this?

Oh boy, FS2Crew for the upcoming PSX? I can hardly wait! This will be amazing! http://aerowinx.com/forum/topic.php?id=1403