May 2, 20215 yr 1 hour ago, Wolkenschreck said: Well, the answer is just above your post. 😉 But yes, you will still need AIFlow or FS AI Separation, with the latter being a bit less aggressive and allowing more arrivals. sorry, silly of me, I didn't notice the answer for some reason. I am using P3Dv5, and I understand AI Separation will not work?
May 2, 20215 yr On 4/30/2021 at 2:22 PM, Nemo said: I've not yet observed this issue, maybe it is airport specific or you have a faulty config.xml. Did you observe it at every airport? It's every airport. Example config... the only thing I change between airports is the ICAO and runways. <Parameters> <Airport> <ICAO>OMDB</ICAO> <ActiveTakeOffRunway> <Runway>R30R</Runway> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R30L</Runway> </ActiveLandingRunway> </Airport> <enableFastTakeOffs>1</EnableFastTakeOffs> <allowTakeOffDistance>6000</AllowTakeOffDistance> <taxiSpeedLimiter>30</TaxiSpeedLimiter> <runwayTaxiSpeed>29</runwayTaxiSpeed> <enableRollthenTakeOff>1</enableRollthenTakeOff> <minCrossingRny>2000</minCrossingRny> <isGUIVisible>1</isGUIVisible> <voidTimer>1000</voidTimer> <TaxiSeparationMultiplier>1.8</TaxiSeparationMultiplier> </Parameters>
May 3, 20215 yr 11 hours ago, Chapstick said: It's every airport. Example config... the only thing I change between airports is the ICAO and runways. I don' see any obvious mistake. Maybe you should add probabilities. <Probability>1.0</Probability> But this was not necessary in former versions. But who knows ... - Harry 9800x3D (Strix x870e-E) - 64GB RAM (DDR5 6000, CL 30) - RTX 5090, 34'' 1440p OLED HDR - Windows 11 Pro (1TB M.2) - MSFS 2024 (MS Store, 4TB M.2).
May 3, 20215 yr 18 hours ago, vl1 said: sorry, silly of me, I didn't notice the answer for some reason. I am using P3Dv5, and I understand AI Separation will not work? No problem. 🙂 For P3Dv5 you can use the following tools for separation: AI Flow AI Aircraft SID and STAR Controller F.S. AI Separation (fsaisv1.1.zip) Feature wise, I do like AI Flow the most. However, the separation is a bit too aggressive. Thus, only few arrivals will reach the airport. Maybe Roland @Clipper Ocean Spray could have a look at this again in the future? For plain separation, I do like F.S. AI Separation the most. It does still work with P3Dv5 as long as you have a free copy of FSUIPC installed. Moreover, with many changes to ICAO identifiers it does make sense to update the airport database. A replacement can be downloaded here:https://www.alpha-india.net/forums/index.php?topic=21541.msg231340#msg231340 On my PC, I do use ATCAPI, AI Flow, AI Ground, and F.S. AI Separation at the same time for different purposes. Best, Christoph Display resolution: 1920x1080 (8xSSAA) GPU: 1080TI CPU: i7-7700K (5.0 OC) RAM: 16GB SSD: Samsung 850Evo Monitor: 27K
May 4, 20215 yr Hi, do you use AI Aircraft SID and STAR Controller in P3D? I have been using it in FSX (now i'm on P3D v4.5) and it works great (v 1.3 if i remember correctly) especially sid and star operations. I have it on my disk somewhere. Do Do you have any advice on how to properly set it to work with ATCAPI, AI Flow, AI Ground. I also didn't know that F.S. AI Separation works in P3D, or I can also ask for settings. If that's not a problem, what settings do you use in ATCAPI, AI Flow, AI Ground? Best regards Grzegorz
May 5, 20215 yr I'm still using AI Controller 1.4B with P3Dv4.5 and FSUIPC 6 and it works fine. Should work with v5 as well. Not tested because I have not switched my AI setup to v5 yet. brgds, Ron Flying P3Dv5 with PMDG 737 NGXu, 747v3, 777; QW 787; Orbx; Chaseplane, AI Lights Reborn Pro, Lots of AI, AIController Visit www.airlinesim.aero
May 5, 20215 yr Do You use it together with ATCAPI, AIFlow? How do You set AI Controller and it's posible to use it as sid/star operation and leave rest to ATC API etc? I'm also using V4.5.
May 7, 20215 yr On 5/5/2021 at 2:01 PM, Ronaldo1978 said: I'm still using AI Controller 1.4B with P3Dv4.5 and FSUIPC 6 and it works fine. Should work with v5 as well. Not tested because I have not switched my AI setup to v5 yet. Happy to see another user of 1.4B! I have been having some difficulty getting mine to work recently - Can you send me a copy of your settings? I have the sids/stars all downloaded etc. Thank you in advance. I suppose you could paste it in here but a pm would suffice too
May 7, 20215 yr On 5/3/2021 at 11:53 AM, Wolkenschreck said: No problem. 🙂 For P3Dv5 you can use the following tools for separation: F.S. AI Separation (fsaisv1.1.zip)
May 7, 20215 yr Quote Do You use it together with ATCAPI, AIFlow? How do You set AI Controller and it's posible to use it as sid/star operation and leave rest to ATC API etc? I used it along with ATCAPI but not with 1.0.0.5 yet. Not tested with AIflow along. I'm too busy at the moment and did not started P3D at the last few weeks. 12 hours ago, colinosullivan said: I have been having some difficulty getting mine to work recently - Can you send me a copy of your settings? I have the sids/stars all downloaded etc. Sure. I have a couple of sid/stars installed but these settings are in use for LAX. Might not work at other airports. Spoiler //AISIDSTAR CONTROLLER INITIALIZATION FILE REV 1.4 //NOTE: This .ini file was automatically created by the AIMonitor program and // contains minimal commenting. // AIConfigLastUpdateTime=1612822670 AIStopProgram=0 STAR=E:\FS_Tools\AIController\out\Australia\*.* STAR=E:\FS_Tools\AIController\out\Austria\*.* STAR=E:\FS_Tools\AIController\out\Canada\*.* STAR=E:\FS_Tools\AIController\out\Caribbean_Netherlands\*.* STAR=E:\FS_Tools\AIController\out\China\*.* STAR=E:\FS_Tools\AIController\out\France\*.* STAR=E:\FS_Tools\AIController\out\Germany\*.* STAR=E:\FS_Tools\AIController\out\Hong_Kong\*.* STAR=E:\FS_Tools\AIController\out\New_Zealand\*.* STAR=E:\FS_Tools\AIController\out\United_Kingdom\*.* STAR=E:\FS_Tools\AIController\out\United_States\*.* SID=E:\FS_Tools\AIController\out\Australia\*.* SID=E:\FS_Tools\AIController\out\Austria\*.* SID=E:\FS_Tools\AIController\out\Canada\*.* SID=E:\FS_Tools\AIController\out\Caribbean_Netherlands\*.* SID=E:\FS_Tools\AIController\out\China\*.* SID=E:\FS_Tools\AIController\out\France\*.* SID=E:\FS_Tools\AIController\out\Germany\*.* SID=E:\FS_Tools\AIController\out\Hong_Kong\*.* SID=E:\FS_Tools\AIController\out\New_Zealand\*.* SID=E:\FS_Tools\AIController\out\United_Kingdom\*.* SID=E:\FS_Tools\AIController\out\United_States\*.* AIToDelete= DistMOE=0.5 DegreesMOE=3 NoVectorAltitude=1500 NoVectorDistance=7 AITurnScalar=1 AISpeedScalar=1 AIPatternAlt=2000 AIAscentDescentScalar=1 AIMonitorRadius=200000 AIMaxSpawnDistanceFromSID=5 AIMaxSpawnDistanceFromSTAR=100 AISeparationDistance=3 UserAISeparationDistance=0 AIHoldingAllowed=4 AICustomHold=0 AIGoAroundLeaveArea=0 AIAutoSTAR=0 UT2Compatibility=0 AITelemetry=0 AIHighSampleRate=1 Verbose=0 Debug=0 MyDocumentsPath=E:\Users\Ronaldo\Documents\Prepar3D v4 Files\ AIAllowPiston=0 AIHoldingTurnScalar=1.2 AITrafficSpeedAdjust=0.70 AITurboPropSpeedAdjust=0.80 AIPistonSpeedAdjust=0.40 AIJetMaxAltitude=32000 AITurboPropMaxAltitude=20000 AIPistonMaxAltitude=9000 AIVectorSortPeriod=1 AIMaxHolding=200 AIReleaseTimerMax=30 AIDecreasingTimedRelease=1 AIForcedReleasePriority=1 AITargetLandingRate=4 AIMaxWanderTime=30 AIAntiOffAngleApproach=1 AICircleUntilAssignedRunway=2000 AIHoldForRunwayPattern=2 AICirclingTimeNoRunway=600 AIAntiScudRunner=1 AIFinalApproachTooLow=0 AIFinalApproachTooHigh=10000 AIAntiClosePair=0.164 AIAntiRunwayIncursion=0 AIFinalApproachUseFile=0 AIFinalApproachAutoRecord=0 AIRecordRollOutSpeed=20 AIRecordFinalMaxTime=600 AISpeedIAF=180 AISpeed1700=170 AISpeed1000=160 AISpeed500=150 AISpeedTouchDown=145 AIFinalApproachSlowDownScalar=0.5 AIRollOutSlowDownScalar=1 AIRollOutTime=90 AIIAFDetectionDelay=10 AIImmediateForceLandAll=1 AIFinalApproachGoArounds=0 AIShortFinalRelease=0 AIFinalPrecisionModeAlt=3000 AIFinalTurnScalar=2.3 AIFinalAscentDescentScalar=0.90 AILandWithoutClearance=1 AIClimbOutHeight=900 AIMaxSpawnDistanceFromAirport=5 AIPerAircraftCalibration=1 AITrafficPattern=1 AIStraightInAngle=35 AIJetRoutesEnabled=0 AIAverageWinds=000000 AIJetRoutesFlightLevel=18000 AIJetRoutesLowerLimit_Jet=28000 AIJetRoutesUpperLimit_Jet=38000 AIJetRoutesLowerLimit_Prop=18000 AIJetRoutesUpperLimit_Prop=22000 AIMinTripLengthForJetRoutes=90 AIJetRoutesTerminusRadius=70 AIPreferredJetRoutes=J,U AIDisFavoredJetRoutes= AIPreferredJetroutesScalar=1.25 AIDisfavoredJetroutesScalar=1.25 AIJetRoutesOnly=0 AIJetRoutesOrigin=1 AIFastJetRouteCalc=1 AICull=0 AICullHeight=20000 AIEnhancedApproach=0 AIEnhancedFinalDist=7 AIEnhancedFinalHeight=2500 AIEnhancedFinalTurnAngle=45 AIEnhancedFinalBase=7 AIEnhancedFinalStraightinAngle=30 AIEnhancedRandom=0 AIEnhancedTaxiSeparation=250 AIEnhancedTaxiSpeed=15 AIEnhancedMinRunwayLengthJet=4500 AIEnhancedMinRunwayLengthTurbo=2000 AIEnhancedMinRunwayLengthProp=800 AIEnhancedMaxAIPerRunway=5 AIEnhancedMaxHdgDifferenceForRunwayBalancing=40 AIEnhancedRunwayIncursion=0.75 AIEnhancedAITaxiWaitTime=120 AIEnhancedLandingRunwayPref= AIEnhancedParkAfterArrivalTime=30 AITaxiDeaccellScalar=0.90 AITaxiAccellScalar=1.10 AITaxiOffAngleSlowdown=3 AITaxiOffAngleStop=89 AITaxiDistMOE=5.0 AITaxiDegreesMOE=0 AITaxiDistRunwayExit=30 AITaxiBearingRunwayExit=65 AITaxiTurnScalar=1.60 AITaxiCollisionAngle=15 AICollisionDetect=1 AIRampNoCollisionWaypoints=5 AIEnhancedInjectDepartingAI=1 Edited May 7, 20215 yr by Ronaldo1978 brgds, Ron Flying P3Dv5 with PMDG 737 NGXu, 747v3, 777; QW 787; Orbx; Chaseplane, AI Lights Reborn Pro, Lots of AI, AIController Visit www.airlinesim.aero
May 10, 20215 yr Hi Guys: Does anybody has the old version of AIGround? Or where I can download it, cant find it on the web. I need the .ini file to do some tests. Thanks in advance for your time and help. Tony RD AIG Conversion Team
May 11, 20215 yr Sorry Guys for not getting back earlier! It was a very busy week. On 5/4/2021 at 11:47 PM, Grzegorz said: Hi, do you use AI Aircraft SID and STAR Controller in P3D? I have been using it in FSX (now i'm on P3D v4.5) and it works great (v 1.3 if i remember correctly) especially sid and star operations. I have it on my disk somewhere. Do Do you have any advice on how to properly set it to work with ATCAPI, AI Flow, AI Ground. I also didn't know that F.S. AI Separation works in P3D, or I can also ask for settings. If that's not a problem, what settings do you use in ATCAPI, AI Flow, AI Ground? Best regards Grzegorz No Problem at all, Grzegorz! But I should point out that I fly on VATSIM if I do want control. The rest of the time, I do use the sim for AI spotting. If you fly with offline ATC and Ai, than AI Flow might could replace F.S. AI Separation. But as I said, I found the separation with AI Flow too aggressive. Aircraft will end up in the hold but do not get released. ATCAPI: Spoiler <Parameters> <Airport> <ICAO>EDDF</ICAO> <ActiveTakeOffRunway> <Runway>R18</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R25C</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R25R</Runway> <Probability>0.5</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R25L</Runway> <Probability>0.5</Probability> <ATCModel>A388,B744,B748,MD11</ATCModel> </ActiveLandingRunway> </Airport> <Airport> <ICAO>EDDM</ICAO> <ActiveTakeOffRunway> <Runway>R26L</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R26R</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R26L</Runway> <Probability>0.5</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R26R</Runway> <Probability>0.5</Probability> </ActiveLandingRunway> </Airport> <Airport> <ICAO>KATL</ICAO> <ActiveTakeOffRunway> <Runway>R26L</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R27R</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R26R</Runway> <Probability>0.33</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R27L</Runway> <Probability>0.33</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R28</Runway> <Probability>0.33</Probability> <ATCModel>!A343,!A359,!A35K,!A388,!B744,!B748,!B763,!B764,!B772,!B77L,!B77W,!MD11</ATCModel> </ActiveLandingRunway> </Airport> <Airport> <ICAO>KDEN</ICAO> <ActiveTakeOffRunway> <Runway>R25</Runway> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R08</Runway> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R34L</Runway> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R34R</Runway> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R35L</Runway> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R35R</Runway> </ActiveLandingRunway> </Airport> <Airport> <ICAO>KLAX</ICAO> <ActiveLandingRunway> <Runway>R24R</Runway> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R25L</Runway> <ATCModel>A388,B748</ATCModel> </ActiveLandingRunway> <ActiveTakeOffRunway> <Runway>R24L</Runway> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R25R</Runway> </ActiveTakeOffRunway> </Airport> <Airport> <ICAO>KORD</ICAO> <ActiveTakeOffRunway> <Runway>R28R</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R27L</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R27R</Runway> <Probability>0.25</Probability> <ATCModel>!A343,!A359,!A35K,!A388,!B744,!B748,!B763,!B764,!B772,!B77L,!B77W,!MD11</ATCModel> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R27C</Runway> <Probability>0.25</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R28C</Runway> <Probability>0.25</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R28L</Runway> <Probability>0.25</Probability> <ATCModel>!A343,!A359,!A35K,!A388,!B744,!B748,!B763,!B764,!B772,!B77L,!B77W,!MD11</ATCModel> </ActiveLandingRunway> </Airport> <Airport> <ICAO>KSEA</ICAO> <ActiveTakeOffRunway> <Runway>R16L</Runway> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R16C</Runway> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R16R</Runway> </ActiveLandingRunway> </Airport> <Airport> <ICAO>LSZH</ICAO> <ActiveTakeOffRunway> <Runway>R28</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R16</Runway> <Probability>0.5</Probability> <ATCModel>A343,A359,A35K,A388,B744,B748,B772,B77L,B77W,MD11</ATCModel> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R14</Runway> <Probability>0.5</Probability> <ATCModel>A343,A359,A35K,A388,B744,B748,B772,B77L,B77W,MD11</ATCModel> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R28</Runway> <Probability>0.5</Probability> </ActiveLandingRunway> </Airport> <Airport> <ICAO>LLBG</ICAO> <ActiveTakeOffRunway> <Runway>R26</Runway> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R21</Runway> <Probability>0.7</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R30</Runway> <Probability>0.3</Probability> </ActiveLandingRunway> </Airport> <Airport> <ICAO>VHHH</ICAO> <ActiveTakeOffRunway> <Runway>R07R</Runway> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R07L</Runway> </ActiveLandingRunway> </Airport> <enableFastTakeOffs>1</EnableFastTakeOffs> <allowTakeOffDistance>6000</AllowTakeOffDistance> <taxiSpeedLimiter>30</TaxiSpeedLimiter> <runwayTaxiSpeed>35</runwayTaxiSpeed> <enableRollthenTakeOff>1</enableRollthenTakeOff> <minCrossingRny>1000</minCrossingRny> <isGUIVisible>1</isGUIVisible> <voidTimer>600</voidTimer> <TaxiSeparationMultiplier>2.3</TaxiSeparationMultiplier> <Debug>0</Debug> </Parameters> F.S. AI Seperation: Spoiler [options] Min Separation=4 > depends on the airport, but always try to have a difference of 2nm between min separation and desired separation Desired Separation=6 Refresh Rate=4 HDG Difference=90 No move zone=6 Reduced Separation=35 AI Flow: Spoiler //AIFLOW INITIALIZATION FILE REV 1.1 //This .ini file is not required. AIFlow will operate without this .ini //file, instead using internal default values. // //However, the following parameters (default values included) may be used //to tweak the program. // //Remove comments to activate. // // AIARRIVALSPACING=0.0 USERAISEPARATIONDISTANCE=0.0 AIMAXHOLDING=0 AITURBULENCESCALAR=1.0 //AISPEEDSCALAR=1.0 //AITURNSCALAR=1.0 //AIMONITORRADIUS=200000 //AIANTIRUNWAYINCURSION=0 //AIBADAPPROACHFILTER=0 //AIGOAROUNDLEAVEAREA=1 //AITERMINALAREAMINSPEED=160 //AITERMINALAREAMAXSPEED=210 //AITERMINALAREAMINDIST=4.0 //AITERMINALAREAMINSPEED must also be non-zero AIPLANESPOTTINGONLY=1 EXTERNALDATABASEFALLBACK=1 INSIMMESSAGELEVEL=0 STARTMINIMIZED=1 INIPERIODICUPDATE=0 AI Ground: Spoiler //AIGROUND INITIALIZATION FILE REV 1.1 //This .ini file is not required. AIGround will operate without this .ini //file, instead using internal default values. // //However, the following parameters (default values included) may be used //to tweak the program. // //Remove comments to activate. // // AIPUSHBACKHOLDTIME=40 AIEXTENDEDPUSHBACK=1 AINOCONTROLCHECK=1 //AITAXISEPARATIONDISTANCE=200.0 //AIADVANCEDINCURSIONDETECTION=0 //AITAXILOCALDISTANCE=5.0 //AIMONITORRADIUS=55556 AILANDINGBRAKINGSCALAR=3.0 //start with 15.0 if using AILANDINGTARGETTIME or 10.0 for EGLL or 7.0 for AIG //AILANDINGTARGETTIME=0.0 //AILANDINGBRAKINGGAIN=3.0 //AITAKEOFFTHRUSTDERATESCALAR=1.0 //start with 15.0 is using AITAKEOFFTARGETTIME //AITAKEOFFTARGETTIME=0 //AITAKEOFFTHRUSTDERATEGAIN=3.0 AIPLANESPOTTINGONLY=1 INSIMMESSAGELEVEL=0 STARTMINIMIZED=1 INIPERIODICUPDATE=0 PS: And if you want to streamline things a bit, you can place all tools and configs in one folder, and register it with one add-on.xml: Spoiler <?xml version="1.0" encoding="UTF-8"?> <SimBase.Document Type="AddOnXml" version="4,0" id="add-on"> <AddOn.Name>AI Traffic Tools</AddOn.Name> <AddOn.Description>AI Traffic Tools</AddOn.Description> <AddOn.Component> <Category>DLL</Category> <Path>TrafficToolbox.dll</Path> <DLLType>PDK</DLLType> </AddOn.Component> <AddOn.Component> <Category>DLL</Category> <Path>ATCAPI.dll</Path> <DLLType>PDK</DLLType> </AddOn.Component> <AddOn.Component> <Category>DLL</Category> <Path>AI_SlopedRunways.dll</Path> <DLLType>PDK</DLLType> </AddOn.Component> <AddOn.Component> <Category>EXE</Category> <Path>aiseparation.exe</Path> </AddOn.Component> <AddOn.Component> <Category>EXE</Category> <Path>AIGround.exe</Path> </AddOn.Component> <AddOn.Component> <Category>EXE</Category> <Path>AIFlow.exe</Path> </AddOn.Component> </SimBase.Document> Edited May 11, 20215 yr by Wolkenschreck Best, Christoph Display resolution: 1920x1080 (8xSSAA) GPU: 1080TI CPU: i7-7700K (5.0 OC) RAM: 16GB SSD: Samsung 850Evo Monitor: 27K
May 11, 20215 yr On 5/7/2021 at 11:48 AM, vl1 said: That's a strange one! All I have done with P3Dv5 is updating the airport file with the one I linked to AIG. Everything else is running nicely with FSUIPCv6 and Windows 10. You could check for a NET Framework update just in case. But I uploaded you my airport files just in case, as the error is referring to an entry in the Airports_FS2004.csv. Try to replace it:https://drive.google.com/drive/folders/1uwR0iVCJm7HkY1DIE1_DgwGKixYNhbC3?usp=sharing 15 hours ago, peluso5 said: Hi Guys: Does anybody has the old version of AIGround? Or where I can download it, cant find it on the web. I need the .ini file to do some tests. Thanks in advance for your time and help. Tony RD AIG Conversion Team Hey Tony! You can find AIGround in the AVSIM library: aiground_v110.zip Just make sure to deactivate the following features in AIFlow/AIGround for compatibility with ATCAPI: AILANDINGBRAKINGSCALAR=1.0 AILANDINGTARGETTIME=0 Edited May 11, 20215 yr by Wolkenschreck Best, Christoph Display resolution: 1920x1080 (8xSSAA) GPU: 1080TI CPU: i7-7700K (5.0 OC) RAM: 16GB SSD: Samsung 850Evo Monitor: 27K
May 11, 20215 yr Hi, Thanks Christoph, what i want is an older version than 1.10 if available (1.0.1), what i want to do is de-activate the flaps deploy for take off in AIGround, as all the models converted from my team already has flaps for T/O. Was AI traffic spotting yesterday and saw an strange behavior of the flaps during pushback and the begining of taxi. Sent an email to Roland long time ago with no response. Have a nice day. Tony AIG Conversion Team
May 11, 20215 yr 7 hours ago, Wolkenschreck said: Sorry Guys for not getting back earlier! It was a very busy week. No Problem at all, Grzegorz! But I should point out that I fly on VATSIM if I do want control. The rest of the time, I do use the sim for AI spotting. If you fly with offline ATC and Ai, than AI Flow might could replace F.S. AI Separation. But as I said, I found the separation with AI Flow too aggressive. Aircraft will end up in the hold but do not get released. ATCAPI: Reveal hidden contents <Parameters> <Airport> <ICAO>EDDF</ICAO> <ActiveTakeOffRunway> <Runway>R18</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R25C</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R25R</Runway> <Probability>0.5</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R25L</Runway> <Probability>0.5</Probability> <ATCModel>A388,B744,B748,MD11</ATCModel> </ActiveLandingRunway> </Airport> <Airport> <ICAO>EDDM</ICAO> <ActiveTakeOffRunway> <Runway>R26L</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R26R</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R26L</Runway> <Probability>0.5</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R26R</Runway> <Probability>0.5</Probability> </ActiveLandingRunway> </Airport> <Airport> <ICAO>KATL</ICAO> <ActiveTakeOffRunway> <Runway>R26L</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R27R</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R26R</Runway> <Probability>0.33</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R27L</Runway> <Probability>0.33</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R28</Runway> <Probability>0.33</Probability> <ATCModel>!A343,!A359,!A35K,!A388,!B744,!B748,!B763,!B764,!B772,!B77L,!B77W,!MD11</ATCModel> </ActiveLandingRunway> </Airport> <Airport> <ICAO>KDEN</ICAO> <ActiveTakeOffRunway> <Runway>R25</Runway> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R08</Runway> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R34L</Runway> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R34R</Runway> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R35L</Runway> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R35R</Runway> </ActiveLandingRunway> </Airport> <Airport> <ICAO>KLAX</ICAO> <ActiveLandingRunway> <Runway>R24R</Runway> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R25L</Runway> <ATCModel>A388,B748</ATCModel> </ActiveLandingRunway> <ActiveTakeOffRunway> <Runway>R24L</Runway> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R25R</Runway> </ActiveTakeOffRunway> </Airport> <Airport> <ICAO>KORD</ICAO> <ActiveTakeOffRunway> <Runway>R28R</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R27L</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R27R</Runway> <Probability>0.25</Probability> <ATCModel>!A343,!A359,!A35K,!A388,!B744,!B748,!B763,!B764,!B772,!B77L,!B77W,!MD11</ATCModel> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R27C</Runway> <Probability>0.25</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R28C</Runway> <Probability>0.25</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R28L</Runway> <Probability>0.25</Probability> <ATCModel>!A343,!A359,!A35K,!A388,!B744,!B748,!B763,!B764,!B772,!B77L,!B77W,!MD11</ATCModel> </ActiveLandingRunway> </Airport> <Airport> <ICAO>KSEA</ICAO> <ActiveTakeOffRunway> <Runway>R16L</Runway> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R16C</Runway> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R16R</Runway> </ActiveLandingRunway> </Airport> <Airport> <ICAO>LSZH</ICAO> <ActiveTakeOffRunway> <Runway>R28</Runway> <Probability>0.5</Probability> </ActiveTakeOffRunway> <ActiveTakeOffRunway> <Runway>R16</Runway> <Probability>0.5</Probability> <ATCModel>A343,A359,A35K,A388,B744,B748,B772,B77L,B77W,MD11</ATCModel> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R14</Runway> <Probability>0.5</Probability> <ATCModel>A343,A359,A35K,A388,B744,B748,B772,B77L,B77W,MD11</ATCModel> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R28</Runway> <Probability>0.5</Probability> </ActiveLandingRunway> </Airport> <Airport> <ICAO>LLBG</ICAO> <ActiveTakeOffRunway> <Runway>R26</Runway> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R21</Runway> <Probability>0.7</Probability> </ActiveLandingRunway> <ActiveLandingRunway> <Runway>R30</Runway> <Probability>0.3</Probability> </ActiveLandingRunway> </Airport> <Airport> <ICAO>VHHH</ICAO> <ActiveTakeOffRunway> <Runway>R07R</Runway> </ActiveTakeOffRunway> <ActiveLandingRunway> <Runway>R07L</Runway> </ActiveLandingRunway> </Airport> <enableFastTakeOffs>1</EnableFastTakeOffs> <allowTakeOffDistance>6000</AllowTakeOffDistance> <taxiSpeedLimiter>30</TaxiSpeedLimiter> <runwayTaxiSpeed>35</runwayTaxiSpeed> <enableRollthenTakeOff>1</enableRollthenTakeOff> <minCrossingRny>1000</minCrossingRny> <isGUIVisible>1</isGUIVisible> <voidTimer>600</voidTimer> <TaxiSeparationMultiplier>2.3</TaxiSeparationMultiplier> <Debug>0</Debug> </Parameters> F.S. AI Seperation: Reveal hidden contents [options] Min Separation=4 > depends on the airport, but always try to have a difference of 2nm between min separation and desired separation Desired Separation=6 Refresh Rate=4 HDG Difference=90 No move zone=6 Reduced Separation=35 AI Flow: Reveal hidden contents //AIFLOW INITIALIZATION FILE REV 1.1 //This .ini file is not required. AIFlow will operate without this .ini //file, instead using internal default values. // //However, the following parameters (default values included) may be used //to tweak the program. // //Remove comments to activate. // // AIARRIVALSPACING=0.0 USERAISEPARATIONDISTANCE=0.0 AIMAXHOLDING=0 AITURBULENCESCALAR=1.0 //AISPEEDSCALAR=1.0 //AITURNSCALAR=1.0 //AIMONITORRADIUS=200000 //AIANTIRUNWAYINCURSION=0 //AIBADAPPROACHFILTER=0 //AIGOAROUNDLEAVEAREA=1 //AITERMINALAREAMINSPEED=160 //AITERMINALAREAMAXSPEED=210 //AITERMINALAREAMINDIST=4.0 //AITERMINALAREAMINSPEED must also be non-zero AIPLANESPOTTINGONLY=1 EXTERNALDATABASEFALLBACK=1 INSIMMESSAGELEVEL=0 STARTMINIMIZED=1 INIPERIODICUPDATE=0 AI Ground: Reveal hidden contents //AIGROUND INITIALIZATION FILE REV 1.1 //This .ini file is not required. AIGround will operate without this .ini //file, instead using internal default values. // //However, the following parameters (default values included) may be used //to tweak the program. // //Remove comments to activate. // // AIPUSHBACKHOLDTIME=40 AIEXTENDEDPUSHBACK=1 AINOCONTROLCHECK=1 //AITAXISEPARATIONDISTANCE=200.0 //AIADVANCEDINCURSIONDETECTION=0 //AITAXILOCALDISTANCE=5.0 //AIMONITORRADIUS=55556 AILANDINGBRAKINGSCALAR=3.0 //start with 15.0 if using AILANDINGTARGETTIME or 10.0 for EGLL or 7.0 for AIG //AILANDINGTARGETTIME=0.0 //AILANDINGBRAKINGGAIN=3.0 //AITAKEOFFTHRUSTDERATESCALAR=1.0 //start with 15.0 is using AITAKEOFFTARGETTIME //AITAKEOFFTARGETTIME=0 //AITAKEOFFTHRUSTDERATEGAIN=3.0 AIPLANESPOTTINGONLY=1 INSIMMESSAGELEVEL=0 STARTMINIMIZED=1 INIPERIODICUPDATE=0 PS: And if you want to streamline things a bit, you can place all tools and configs in one folder, and register it with one add-on.xml: Reveal hidden contents <?xml version="1.0" encoding="UTF-8"?> <SimBase.Document Type="AddOnXml" version="4,0" id="add-on"> <AddOn.Name>AI Traffic Tools</AddOn.Name> <AddOn.Description>AI Traffic Tools</AddOn.Description> <AddOn.Component> <Category>DLL</Category> <Path>TrafficToolbox.dll</Path> <DLLType>PDK</DLLType> </AddOn.Component> <AddOn.Component> <Category>DLL</Category> <Path>ATCAPI.dll</Path> <DLLType>PDK</DLLType> </AddOn.Component> <AddOn.Component> <Category>DLL</Category> <Path>AI_SlopedRunways.dll</Path> <DLLType>PDK</DLLType> </AddOn.Component> <AddOn.Component> <Category>EXE</Category> <Path>aiseparation.exe</Path> </AddOn.Component> <AddOn.Component> <Category>EXE</Category> <Path>AIGround.exe</Path> </AddOn.Component> <AddOn.Component> <Category>EXE</Category> <Path>AIFlow.exe</Path> </AddOn.Component> </SimBase.Document> Many thanks for this comprehensive post. I have all this ai helper add-ons except F.S. AI Separation. From where can I get it? - Harry 9800x3D (Strix x870e-E) - 64GB RAM (DDR5 6000, CL 30) - RTX 5090, 34'' 1440p OLED HDR - Windows 11 Pro (1TB M.2) - MSFS 2024 (MS Store, 4TB M.2).
Archived
This topic is now archived and is closed to further replies.