FS2CREW: PUSHBACK EXPRESS

After last update PBE. The truck doesn't go as far as I set distance. I set a distance of 100 meters, but the plane rotates roughly half the way. There is a any reason? Sincerely.

Update notes: Main window now stays on top much more like our FBW program but without the use of the PIN icon. Automatic offset feature (Aircraft shortening). You can follow the discussion in Discord. Discord is much more active than this forum. FS2Crew Discord link: https://discord.gg/ZJ4HKx727m

Do you have an idea how to avoid this problem ? https://drive.google.com/file/d/1XHI04xejR2ieQb-nSsB1vI6I7pFZRV43/view?usp=sharing (Windows 7x64 + P3dv4.5 + Pushback Express v1.4 for P3D)

Hi guys, I have just installed pushback express that I have purchased on simmarket. I am trying to activate it but the website is not providing me with any serial key whatsoever. Does anyone know where to find it? Many thanks Martial

hello I manually uninstalled the pushback express from my PC. And now the launcher no longer wants to Install Express pushback. He thinks he's still on my PC. Installation not possible Sorry for my handwriting, I'm French.

Hi, I can get the app to work but only on the external interface, the built in toolbar will not launch when launch application is clicked. It starts externally but not on the toolbar.

Hello, Sorry the inconvenience, but it hasn´t been possible for me to get the TUG car to connect after the Pre Flight Events (Ground Services) has taken place. I´ve upgraded to version 2.2.7. In the last version, there were a yellow icon (RDY), and it allowed me to call the TUG, but in this new version there´s not such option. I see in the tutorial videos that there´s the CONNECT TUG option, but in my case, I don´t see it. Please, what should I been doing wrong? I appreciate your help

I have read the other thread in which this has been "solved", however these did not seem to fix anything. I have ensured that AI control is completely turned off as well as done multiple clean reinstalls of PBE through the FS2 manager. When I press connect tug it begins pushing back the plane once the tug is in position. I am running the latest version of PBE (2.2.7) with the latest version of the development FBW a320nx. Are there any other possible fixes to this? is it possible I am missing something obvious? When attempting to check the WASM version in the config, there are no versions listed. Thanks, Ben

PBE users, please see this thread:

Hi. I have tried with both rudder control and the window buttons but this seems not to work properly. After the pushback once you slow to 0 speed and then accelerate forward trying to pull the aircraft the direction controls are still in the "pushback mode" so the tug and nose wheel will try to go to the opposite direction. Then it´s basically impossible to move the aircraft forward in this case as it seems to be receiving both directions inputs at the same time and then it takes a lot of distance to perform a turn (the turn radius is extremely big). I´m using the latest MSFS version and also the latest Pushback Express version, recently released. See example of…

I was hoping you could help with a problem I get when I use line mode. When I click on the 2 arrowed line to toggle the distance marker on screen I get an 'Exception received: 22' error message. Do you have any thoughts what this msg is please. Many thanks

FS2Crew users, Please use the FS2Crew Product Manager from now on. It will automatically notify you when updates are available for Pushback Express... as well as give you a "Download Now" button for the updates! It's a much better system than before. It ensures everyone will get their software updates! Link: https://fs2crew.com/downloads/

Using with the PMP A330 in VR mode. Everything good except if I change the distance and/or final heading in either the 2-D or VR mode boxes I always get the same distance and final heading after pushback ?

I realized that when I connect the tug for pushback, the jetway and ground power automatically disconnects - which is correct. However, when I request the tug to begin pushback, the jetway and ground power automatically connects back to the aircraft so I have to manually stop the ground power and jetway from connecting by using the PBE ground services. Am I doing something wrong?

I use PBE for a while now and am quite satisfied with it. I recently reinstalled my PC with Windows 11 and the latest FS2020 Version and, ofc, PBE. Everything works perfects except PBE. the app starts, however it constantly hangs. (see picture). In syslog I see this messages: "Das Programm Pushback Express_x64.exe Version 2.2.0.0 hat die Interaktion mit Windows beendet und wurde geschlossen. Überprüfen Sie den Problemverlauf in der Systemsteuerung "Sicherheit und Wartung", um nach weiteren Informationen zum Problem zu suchen. Prozess-ID: 2e60 Startzeit: 01d7e541fdea7dcb Beendigungszeit: 5 Anwendungspfad: C:\Program Files (x86)\Pushback Express…

Hi Bryan, just purchased PBE and everytime I launch it, either as standalone or via the MSFS toolbar it always requests me to input my data and validate the License. I usually run it in Admin Mode, as well as MSFS, but I have also tried to launch it non in Admin Mode, but the result has not changed. What am I doing wrong ? Thanks Ezio Cingolani

Firstly, apologies if this has been asked before or if it sounds stupid. I just purchased the PBE and currently using it together with the FS2Crew FBW32nx project. May I know which pre flight event should I start or do I start both?

As in the title: I'd like to not use the command center at all, since it's one annoying extra window that even in the background only makes ALT+TABbing annoying. Anyway I see the marshaller button in the external panel, but I cannot click on it. I can enter values for distance offset etc, but they have no effect, even if the marshaller is activated by command center. I read that in another post that you enabled marshaller control via the external panel in one of the last beta versions, so I don't think this is how it is supposed to be. EDIT: The values in the external panel are updated once I change them in the command center, but not the other way around. As an addi…

When I connect PBE to MSFS, the airplane sound changes and all bass is virtually eliminated. It becomes very tinny, however the Voice in PBE is not affected. Sound returns to normal once pushback is complete and the program automatically closes. Is this how it is supposed to function?

I’ve just reinstalled PBE after using PushbackTool bar for a while. Downloaded and installed PBE from my account today then installed the latest public beta. I have deleted the exe.xml and rebuilt, reinstalled PBE and run MSFS as admin but it still doesn’t auto start. I can start it manually though and it works ok. WASM is 1.0.0.0, I’ve also set Command Centre to Run as Admin… Any other ideas?

Hi, I don't know if this has been asked/considered or not. I could not find anything when I searched. Can we please have the option to set our own time value for Pushback Express Events. At present it is set to default of 30 minutes countdown. I use some other tools too and to synchronise all the events properly, it would be great if we can set this time value (either through PE GUI or through a config file). Thank you for consideration. Regards, Yousuf

Please see this! It'll help push you back to the taxiway line... it's not perfect, but we're one step closer to auto pushbacks to the taxiway line.

Hi, would it be possible to to set the pushback direction in voice mode with a command? (distance mode) like "ready for pushback and engine start. facing left/right. in real life it would be north, west... thanks

Hey 👋 After pushing back with PBE (voice control, if that matters) after the command „stop pushback“, the Brake Fan button lights up in the FBW A320. Does nit happen everytime, but about 50% of the time. any idea, am i doing something wrong? Bypass pin option is not checked and im not using manual brakes to stop pushback. Parking brake is off while pushing of course. Thanks PS: I hope you dont mind that im back Bryan... 🙂 The tutorial did wonders and i enjoyed the FBW version and PBE to the fullest on my latest flights, its just awesomely immersive and works flawless now!

Please click the link to read the details: