The Wilco-Feelthere Special Edition (Volume 1 and 2)

Evening. I've got a Saitech flight yoke and have been attempting (for quite some time now) to get FS2C to recognize the button presses. Windows reports them as buttons 7 & 8 and FSUIPC reports them as 6 & 7. Of course, I think FSUIPC starts at 0 instead of 1 like Windows. Now, I've used BOTH combinations in FS2C but it will not recognize them at all. The are not defined at all via FSUIPC, so there's no conflict there. In my FS9 767 version of FS2C, it does ok, but that's probably because of the assigning actual keypresses to them (marker beacon etc). FS2C is not catching the direct interrupts for these 2 buttons. I looked at the panel files and it IS updat…

hi guys, I need help. i have fs2004 and wilco A230 pic. i wanted to fly from the co-pilot side could anyone help me with an addon for wilco A320 program or suggest me one. Thanks. i have posted the same topic on other sections also i did not know where this topic would fit, if i have done any mistake i am sorry.

Hi!I have just installed the FS2Crew I started to have problems with the ilumination of the panels on a night flight. When i get back to the Wlco Feelthere settings and ask for a "Dark & Cold" beginning the panel lights don't come on even the Flood Light knob.What would be wrong?Thanks,....Alvaro

In my approach briefing... Thrust levers... When I click to Full instead of idle, nothing happens... Thought the FO would put the levers to full reverse ????

Hi EverybodyI have just purchased Volume 2, and when I atempt to start a saved flight with the airbus, all the flight instruments are black.Also When I attempt to load a difrent aircraft after the airbus, flight sim crashes to desktop.Any help would be greatly apreciatedPaul

I am using a mac with bootcamp and had to make the partition bigger so I reinstalled Windows XP and all of my FSX programs. I can't seem to use FS2Crew with my Airbus program anymore (worked before the reinstall). When I try to load the airbus FSX crashes and shuts down. When I uninstall FS2Crew I can load the Wilco Airbuses without issue. I tried redownloading from the FS2Crew website but still the same problem. I have tried to registry tool but nothing. Any ideas or should I reinstall everything again?

I'm hoping someone help me urgently. I've managed to completely disable my Vista because I only partially followed directions.I just downloaded FS2Crew Wilco/FeelThere SE and installed it while doing 10 other unrelated things. I also carefully noted the direction to Vista users to globally disable the DEP, which I almost did .... well, I ran the command, but I put off re-booting.When it came to using FSX with FS2Crew, I thought I'd already re-booted, so I just opened it up. This crashed the computer and it now won't start beyond the system repair menu.The one (possibly useful) thing I can get up from the options is a Command Prompt .... but I have no idea what to do from …

Hi I have a slight problem when assigning joystick keys .. some panel cfgs are not updating and some assign 1 lower then i save it to .. eg 3=2 4=3 etc . any ideas ? Thanks Rich

Hi Bryan,I have had this several times now, so I think it's a bug:When I set the configuration before take off in the TDC panel to CONF 3 (Flaps 3) + Flex Temp, the FO will later be setting Flaps Full instead of Flaps 3, so I always need to move back to Flaps 3 manually before Take Off.I am using FS2Crew Airbus Special Edition, including service pack, with FS9.1ThanksStefan

Hello,To begin with, thank you for this terrific add-on!Everything's fine except for the A330 (both, -200 and -300). I can't see any sensible values in the TDC about V1, VR, V2 and MACTOW/TRIMI can see, all the time, V1=118, VR=125, V2=0 and MACTOW/TRIM=OUTRNGE! I mean, even if I change the flap setting or weight it remains like that!Do you know what's going on?Thanks again,C

Hello Bryan,I just touched down in Newcastle with an A320 this evening (on VATSIM). After I've parked the ground engineer contacted me "any snags?", but when I was to say how much fuel remained it became silent...the capt just said "Fuel remaining is...". Where does FS2Crew retrieve this number?Best regards,Kyrre AndersenNorway

Hello!Great program! I don't fly without it!I was wondering if you could tell me where the sound wav is for the Interphone? You know the hi-low chime that sounds when you press the Forward FA button on the overhead. I'm a bit of a stickler and I like to reproduce my actual inflight experiences as we do at the former HP.When 5 miles out we get a double ding to let us know we're on short final. I like to do that but I can barely hear the chime (I know it's realistic) and I was hoping to boost the sound a bit to my liking.Is this possible and if so can you tell me where I might find this bugger and what it's called?Thanks ever so much in advance!

hi there.where can i download some nice wing views for feelthere A320 plz.many thanks.

Anybody knows, how I can disable the automatic door opening in fs2crew for wilco Airbus when I start up... can I go to a file inside to edit ????

Hi,I'm registerd user of FS2Crew Airbus SE.I was change to Vista x64 OS.FSX ran with no problem.But, it crashes after installing FS2Crew Airbus SE. At the time after selecting wilco Airbus.My Environment:CPU: core2 duo E8500RAM:8GBGPU: Geforce 8800GTOS Vista x64 UltimateError log:******Ivent: BEXAppName: fsx.exeAppVersion: 10.0.61472.0AppTimeStamp: 475e17d3ModName: StackHash_4a07ModVersion: 0.0.0.0ModTimeStamp: 00000000Offset: 1ea00000Code: c0000005Data: 00000008OS ver.: 6.0.6001.2.1.0.256.1*******Does the solution for the problem exist?The problem is not in the PMDG747 version.

Whenever I save a flight (even if I make it the default flight) in mid-air, the aircraft settings are lost when I load it again.For example, on a long flight, if I save the flight and then reload it the next day, the engines will be off, the route I loaded into the FMGC will be lost, and the aircraft starts flying back to the original airport! (I mostly fly Wilco Airbus Vol 2 a/c.)Can anyone tell me how to save a flight and retrieve all the aircraft settings? Without this functionality, I'm limited to very short flights!Thanks

Hi,I've noticed something today.During climb when passing Transition Altitude (18000ft in USA for my example), I click on Standby airspeed in VC, then the voice says :"Transition Level, Push QNH", whereas it should say : "Transition Altitude, Pull QNH".FSX version, A320 FeelthereEDIT : Okay, forget about it ! Right Click gives the good text (Transition Altitude) and Left click gives the Transition Level Text.

Hi,the other day I loaded a saved flight (CYUL-TNCM in an A-333), the flight was in midair about half way to destination and I wanted to continue the flight with FS2 Crew also as I had last time I played it (in other words I did the first part with fs2 Crew before saving and quiting). The problem was the game would keep crashing, I tried 5 or 6 times in a row and it crashed every time (A fatal error has occured, FSX is restarting). What I did was load the flight and then, to tell fs2 crew i was in cruise I thought I would press alt crz on the pfd, then tell the FA i was in cruise and finally adjust the PA page, but it would crash every time whenever I would do one of thes…

BryanI have a problem in assigning different keys to the Airbus SE.I can change them for the A320 with out any problems, but not for the bigger Airbuses like the A330. The buttons simply don't change. They are allways in the default position (+/- and button 4/5).The FSCrew.ini files looks like this// Note: To change the weather map source, change the WXLink URL.[KeybJoySettings]cbGreenJoy767=2cbRedJoy767=3cbGreenBtn767=74cbRedBtn767=78cbGreenJoy747P=2cbRedJoy747P=3cbGreenBtn747P=74cbRedBtn747P=78cbGreenBtnAirbusSE=0cbRedBtnAirbusSE=1cbGreenJoyAirbusSE=4cbRedJoyAirbusSE=5cbGreenBtn=0cbRedBtn=1cbGreenJoy=4cbRedJoy=5is here something wrong. Every change i try to make effects…

hi brian againAfter purchasing FSX crew gold which includes the airbus a320 I have just paid and downloaded the upgrade as I own a320 in gold package for airbus volume 1.It has created another fs2 crew start centre (in blue) but for fs9 not fsx and asks me to update which I have done. None of the airbus files work but when I go to my original start centre for FSCrew gold they work but there is no airbus SE series.maybe I should have not bought the upgrade for the a320 but the whole thing, very confused. Please help, we will get there in the end :)cheersKyle

Evening. I have the Wilco AB Vol 2 and, if I'm reading correctly, FS2C works with it. The only tab that's active is the A320 tab and it tells me that the SE version is not installed. I see no option for the Vol2 (or 1, for that matter, which I also have), so any idea how I can install it in my Vol 2? Thanx!-Rick

Hi,I just purchased the Airbus SE product as a download but I did not get any link to download from..Does it take a few days to get that?? or did I miss something along the way..all the best, John

Hi All I have just brought the SE version and can i just say nice work .. , im afraid i havnt played with it right from the start .. i load up with engines running and just select the check lists i need , i have a slight problem with Go arounds , im not sure if its ment to be like it but when i click on GA so it goes to Go around mode , the FO will raise the gear but not the flaps , i click on the green area but theres no spoken message etc so i raise erm my self , also what does MINS ( could it be minimums) mean when im on final cant see any ref to it in the manual ? Thanks Rich

I

Good evening BrianI just received a disk version of FSCrew Airbus Special Addition.I have FSX on Vista 32.I extracted via the exe file and followed the instructions re the bcdedit.exe but FSX crashes when the gauge authorisation "Do you want to run this software" is requested for the acrew0.gau file. I'm afraid it wont let me check the file "Always run software from "Brian York"". Unfortunately I cant use FSX at all And I'm not sure it the problem exists for all the acrew gauge files.with thanksLaurie