The Wilco-Feelthere Special Edition (Volume 1 and 2)

Good day,Recently I bought the FS2Crew Heavy Hitters Pro Pack since I have many aircraft that are supported in the package. Thank you for the reduced price. I am trying to get familiar with the Airbus SE package first. My biggest problem is that many times during the use of FS2Crew the package stops playing the sound of the calls. Most of the time things go wrong when it is time for the push back and engine start. The sound of the ground personal is most of the times not there. I never had calls from the FO when I checked the flight controls. Even running through the checklist will give no sounds after the push back. When I run through them nevertheless the switches are s…

Hello,After finishing a few flights by using FS2Crew I've got a problem with the landing procedure. Up to reaching the checklist "LDG - FLAPS" everything works fine. I can switch the flaps positions by using the green button too. But after setting up the flaps to "full" the checklist doesn't proceed with the next option. So I can't run the landing checklist. If I press the green button again after the "full flaps" configuration the flaps callout begins with position "1" again. By the way the landing gear is down.I can't use the green button for calling "Landing" too. If I switch manually from the "LDG - FLAPS" checklist to the next one by using the right arrow, the flaps …

I AM USING FS2CREW WITH WILCO AIRBUS SPECIAL EDITION 2 WITH FS2004 USING A330-300, WHEN I CALL THE "2 GOOD STARTS" AFTER ENGINE START I GET THE FO CALLING "DO YOU WANT THE APU BLEED ON OR OFF" WHEN I CLICK ON "OFF BUTTON" I SEE THE LITTLE OVERHEAD PANEL ON THE RIGHT HAND SITE BUT THE APU BLEED STAYS ON AFTER ALL. EVERYTHING ELSE SEEMS TO WORK OK .ANY SUGGESTIONS PLZ.THANKS

DOES ANYBODY KNOW WHERE TO GET FREE WILCO AIRBUS SERIES 2 WORLD LIVERIES?THANKS

Originally, I saw the manual or working specs of A330, the Zero fuel and no payload CG should be around 25%However, when I load the Wilco A332 or A333, the CG shown at the MCDU is only 13% which is not correct.The wrong 13% CG mislead the aircraft to trim wrongly (automatically trim, fly by wire) and it takes off at a high pitch angle, causing it A-floor and very high climb rate, until stall and crash.This must be a bug, because I load the aircraft with Wilco own aircraft.cfg and .air file.After that I uninstall the whole FS9, wilco, no use!!Format the whole computer twice, still no use!!I know there are many people meet this problem, please help.Following is the printscr…

Hi,>Displayed takeoff V-Speeds and Trims are very rough estimates. If you want an accurate V-Speed takeoff calculator, FS2Crew recommends t his free calculator:>http://www.flightxpress.de/files/0604/Tools/TPC.exeThe file is not at the site the link points to. Where can I find it ?ThanksVic

Hi AgainIve followed the tutorial for while conducting a flight today and decided to do a CATIII autoland. It says in the tutorial to set DH using Barometic Altitude. I'm not sure i did this right can someone explain

HI, EveryoneI purchased this yesterday but I'm having problems with the load sheet and such displaying in KG where as i would prefer lbs. Ive checked the Airbus configuration and it set to LBS, any ideasMike

i installed all updates and my system is win7 64 bit.if i start a flight and right klick on the button to open the selector panel, so i see only a black window. whats wrong? the others are see without problems.

Hi,does anybody know, if it is possible with FS2Crew to let the Copilot makethe Frequencyswitches given by the ATC automaticly?

How to switch the language to spanish, or how to switch the accent to spanishThanksJaime Perez G.

Hi,I don't know if I'm doing something wrong but for some reason when I get the loadsheet, i fill everything out as it should be, but when I get the payload sheet after that, the weights are completely off! A 100,000 lbs A330 weighs only 20,0000bs? I check the fuel and payload and that's not what it says. Also, when it say is the fuel ok, am I supposed to load the fuel manually or will it do it for me.And another noob question, what does Trip Fuel mean? The amount of fuel I'll use for the flight?Also, when I get the flight planner from the FO It says I'm going to this random destination even though I am not, I have inputted the data into the FS2Crew Start Centre. Is it su…

Hello @all,First of all sorry for my bad English, but I hope I can descripe my problem as precise as possible.Today I bought the FS2Crew Wilco Special Edition and installed this and all the relevant Updates (from April) on my PC (Windows Vista). I have set the DEP to AlwaysOff.However, when starting my FSX (SP1+2) and loading one of the Wilco Airbus Aircrafts (Volume 1) I was asked how FSX should manage the .gau files and after this FSX just freeze (it just do nothing, but also an error message do not appear).I already have tried to reinstall FS2Crew (without all works fine) and have done all the Troubleshooting described in the FAQ, but it all doesn

Hi, is it possibile to gather informations about the FA and the Company panels and the meaning of the various options available. In the manual only a few of them are explained.Thanks and regards.Paolo

Hello All,Sorry if this question has been asked. I'm having issues when it is time to "close the cargo and pass doors". It seems the automated process doesn't "kick in". Is there a way to confirm I have everything set right? They open when I start the "Pre-Flight" events. Is it possible I forwarded the time to fast in the last "5 minutes"?Athlon II X2 245(2.9GHz) 4GB DDR2 500GB NVIDIA GeForce GT 220 1GBWindows 7 Home Premium 64-BitThanks,Rob

Hi I have not flown the Airbus for a while but i did a flight to EGKK from EHAM flying the A321 IAE version , when it comes to the QNH im getting QNH 29.92 instead of 1013 that i have set , i tried it at EBBR too and its the same , the push back crew was American too . Rich

I just bought FS2Crew for Wilco Airbus.I did two flights and everything went fine until I tried to land. The plane went haywire. I could not get the speed reduced, throttles did not work. I had to use speed brakes to slow the aircraft. But, I then could not get the landing gear to come down! The plane would not intercept the localizer and would not capture the glide slope.I have been flying this plane for a long time and have never had this problem before.Did I do something wrong with FS2Crew?Thanksjps611

When fs2crew will be albe for Wilco A330-200 aircraft?tank you!

I bought Wilco Airbus Vol 1 and also fs2crewSE.FSX CTD when the security msg pops up asking to run program.acrew6.gau.I just want confirmed whether I have the wrong version of fs2crewI did install all updates and followed instructions to click the two icons in start center.

I purchased this and installed the program and the most recent update and while trying to load FSX now I get a CTD, indicating a fatal error. Has anyone else had a similar problem? I am running WinXP SE with FSX. I have used other FS2Crew programs without a problem and wish to get this up and running as I really enjoy the interaction. Thanks in advance and Happy Holidays

Start Center is not able to find FeelThere Airbus planes from FS9 and it gives following errormsg:Web Browser: FS2Crew - Start CenterFS2Crew FeelThere Airbus Special Edition not detected, functions on this tab will be INOP.Should I uninstall and then reinstall FS2Crew or FS2Crew FeelThere Airbus Special Edition?FS2Crew Start Center: when I click Manual button it cold not be found

When I push the button on the FO board: That tells the FO to have the communications.... In what way does that command have to work ????Thought he would change my frequenzies automatic, in my ATC.. ???Chris from Denmark

What does it exact mean... Im in doubt ???? Circuits Mode.... What does it mean.. I see CR, on the green button... Chris from Denmark

Good day simmers.I just wanted to ask if there are flowcharts available for the FS2Crew special edition??Like the ones done for the FS2Crew versions for: ATR72-500, LDS 767, PMDG 747 and MD-11 3 FS2Crew MD-11 flowcharts Those flowcharts dont replace the manual, but we simmers are in the uniqe position of having multible (hypothetical) type ratings, and when you switch between 5 different aeroplanes, days or weeks apart, the flowcharts are a quick reminder of how to do things. Given that you have studied them thoroughly first like type rating and line training.I've been unable to locate them here or at the FS2Crew website, if they do exist. Thanks in advance.Golli

Dear FS2Crew: Airbus Special Edition owners:A new update is available.This update is NOT built into the main installer; everyone will need to install it.Airbus Special Edition Updates PageAfter installing, your need to install the April 2009 version of the FS2Crew Start Center.April 2009 Start CenterChange log for Update 2:FIXED: FO