The Wilco-Feelthere Special Edition (Volume 1 and 2) Latest Topics

AP disconnect for no reason.

Sun, 01 Oct 2017 13:35:15 +0000

Hi..Just at cruise the I hear "Autopilot off." The planes stops responding to the AP, BUT, the AP light is still lit, and there is no disconnect alarm.

P3D compatibility

Fri, 30 Sep 2016 10:10:32 +0000

Does this work with the Wilco A330 and P3D?

Wilco Airbus ILS problem Evolution 1-2

Fri, 21 Nov 2014 07:26:58 +0000

In fs2004 when I engage an ILS approach something happens. The plane goes off the glide scope and is too low and I would have to take over and its hard to land in bad weather. Is there any way I can fix this?

UK Accent

Thu, 06 Nov 2014 19:58:37 +0000

Hi Guys,

I was wondering if there is a UK flight crew for Airbus yet?

Thanks

COMPANY OPS

Wed, 02 Oct 2013 19:13:06 +0000

Good afternoon . I have not found in the native manual decryption panel COMPANY OPS . Is responsible for what each button ?

--
Sincerely, Alexey.

Wilco Airbus Autoland Problem

Tue, 07 Sep 2010 15:40:10 +0000

I have a problem with the autoland function of the Airbus A330-200 of the wilco airbus series volume 2.Every time I try to use this function the plane touches ground about 300ft before the runway.Everything else works smooth with the autopilot.I can fly to the waypoint who aligns with the runway. There I activate the LOC function, and the plane aligns correctly with the runway.When I enter the ILS glide slope (from beneath) I activate the APPR function and the AP2.At first everything seems to work fine and the plane starts to descent. But then it descents beneath the glide slope and touches ground before the beginning of the runway.Can anyone tell me what I'm missing???

Airbus STAR Problem

Fri, 21 Dec 2012 14:29:18 +0000

Hi guys, first post here so would appreciate some help.

I fill in my MCDU etc, then when I go to choose the STAR, I click the desired one and receive a message saying 'Buffer Overrun Detected', and my flight simulator closes down. Screenshot below:

I use Windows Vista x86.

Again, all help is appreciated, I have no idea why this occurs. I have tried uninstalling and reinstalling and it didn't work. Tried a differenct AIRAC to see if it was a problem with the STAR, and again, nothing.

Thanks,

Daniel

ARC DMA

Mon, 29 Oct 2012 16:12:19 +0000

Hi all!

Been googling on the web and searching this topic both here and in the pilot's guide but it seemed I was not succesful. Does any one know if it's possible to create an ARC DMA in the FMC of Wilco Airbus series, please?

Thanx,

Ema

FS2crew airbus (DB)

Tue, 14 Aug 2012 02:54:57 +0000

I can only choose the a318 a319 a320 a321 in the (DB) Type

I cannot choose a330or a340.

What is the problem?

blank screens and switches wont work citation x

Sun, 29 Jul 2012 02:21:14 +0000

I have installed the wilco citation x. I have both service packs one and two. I think the acceleration disk has both of them anyway. when I start the sim the panels are dark and none of the switches work. I have tried to change the security of FSX to allow me to do anything. Nothing seems to be working. This could really be a nice plane with a decent fmc if I can get the panels lit. Thanks for your help. I am using windows 7 64 bit. processor is 6 core amd and the graphic card is nvidia 680

FS2Crew + FSCaptain crash

Sat, 07 Jul 2012 09:12:10 +0000

Hi,

My FSX always crashes when loading Wilco Airbus with FS2Crew and FSCaptain both installed.

FS2Crew alone or FSCaptain alone works without problems.

Cyril.

Entries removed from panel.cfg

Sat, 30 Jun 2012 17:42:34 +0000

Hi All

I have some add-ons which add their own entries to the panel.cfg (FSFK, XGauge, ...).

After adding FS2Crew panel entries through Start Center, all those entries are removed. Only default entries stay.

Does anybody know the problem?

Regards, Cyril.

Checklist FS2crew airbus

Sat, 26 May 2012 17:59:28 +0000

Hi,

sorry for my bad English.

I look for a written check list which are said in fs2crew during the different step. I had not find that in the forum.

Thank you very much.

Ph. Noel

FS2crew - Wilco feelThere Airbus Special Edition?

Wed, 25 Apr 2012 19:13:35 +0000

Is the FS2crew -

Wilco feelThere Airbus Special Edition

Is this just like the PMDG 737ngx voice command ? I would like to know before i purchase it. I really like the FS2CREW -PMDG 737 NGX this is my first fs2crew product i ever bought an i would like to know more about the airbus special edition. I really love the fs2crew pmdg 737ngx . An i want to know if the airbuss special edition is any different from fs2crew pmdg 737 ngx. Like for example does it fallows similer voice commands or does it fallows any voice commands at all?

Mr 340

FO comms

Tue, 21 Feb 2012 19:44:45 +0000

Hello Bryan. Recently reinstalled the Airbus Vol. 2 button version to my Airbus Evolution. Installed the update as well. How can I set the FO's voice to come through the headset on the Airbus Vol. 2 button version? I have my defaults set as: Headset/All communications External speakers/All sounds. Fsx is set to default for both of these. This config works for all my other aircraft and FS2 setups just not this one. Is there a way to set it up so the FO sound comes through the headset instead of over the speakers? ATC still comes through the headset like it should. My specs should be listed below. Thanks.

Repaint Request...

Fri, 18 Nov 2011 03:21:16 +0000

Hey All..I have a special request - can anyone possibly do a British Airways repaint of the Wilco Airbus A318. I'd love to have the livery for the A318 they fly into London City airport...The author of the repaint will get a mention/credit in PC Pilot magazine...(lol..that's the best I can do I'm afraid!)Thanks for any assistance... I can write, but I can't paint.. Regards,BeachAV8R

Pushback distance

Sun, 30 Oct 2011 12:24:38 +0000

Hi,The default pushback distance in FS2CREW is between 1 and 23.But, for some airports - 23 is not enought to be extactly on a taxiway after the pushback.How can I increase the pushback value to 30 or 35?

Crz Msg in the PA Page

Sat, 06 Aug 2011 17:21:22 +0000

Hello all, I very often use FS2Crew when flying my airbuses around the globe. Does everybody know if the "Crz Msg" in the Public Address Page isn't possible to use anymore after a specific time is over (i.e. maximum during 10 minutes after takeoff) or only until a specific flight level is reached? I found out that very often I cannot trigger the Crz Msg anymore when I am really in cruise flight. There are usually no such problems when I am on the ground or below FL300 (but still in climb mode) but I assume - as the word says - "Crz Msg" should be used when in cruise flight and not before but unfortunately this doesn't seem possible. Any help is very appreciated. Kind regards, Daniel

Wilco Evolution Series 2 - Crash and shutdown system

Mon, 13 Jun 2011 11:42:14 +0000

Good Evening Folks, i've bought Wilco Series 1 & 2 Evolution pack for my FSX... There is a big problem... After some minutes of flight... The PC shutdown (black screen) and then it restart the system.. This situation is really Unaccettable and it appears only with Wilco...I don't know what to do (my pack are original, i paid 63 € to have them).... Hope you can help me... Best Regards

New versions of the Wilco A320/340s

Thu, 10 Feb 2011 19:35:36 +0000

Hi Just wondering .. Wilco has just released an update to their Airbus series and wondered if FS2CREW is still compatible? Thanks Rich

FSX crashes on Wilco Airbus load

Sun, 21 Nov 2010 20:27:17 +0000

I just loaded FS2Crew Airbus Special Edition on my Windows 7 64 bit machine (FSX). The Wilco/Feelthere software worked fine prior to this. After clicking Trust on all the popup's, FSX Stops immediatlely there after. No other clues...just stopsI have:1. Uninstalled and reinstalled FS2Crew Airbus SE...same problem2. Deleted fsx.cfg....same problem3. Rebooted several timesWilco 320 works fine after FS2Crew Airbus SE is uninstalled.Any ideas??Thanks, JimG

see thru plane, and autopilot failures?

Tue, 14 Dec 2010 03:55:46 +0000

I have been trying to troubleshoot these issues for a while, with no luck. I'll start with the first one:When I go to load the A330/340aircraft in FSX, it becomes obviously that the aircraft seems to be see-thru or missing parts of it (near the wing/engine area especially). At night time, the fuselage itsself becomes rather see-thru and when the gear is retracted, the light shines thru the top of the nose area.Second issue is this: I'll program a flight with calculated numbers and go for take off.. Autopilot will not acknowledge the inputs. EVEN when on the nav track. Autothrottle will not activate either.Suggestions??Thank you all to help! :)

Problems and suggestions

Thu, 02 Dec 2010 10:04:56 +0000

Good day,Recently I bought the FS2Crew Heavy Hitters Pro Pack since I have many aircraft that are supported in the package. Thank you for the reduced price. I am trying to get familiar with the Airbus SE package first. My biggest problem is that many times during the use of FS2Crew the package stops playing the sound of the calls. Most of the time things go wrong when it is time for the push back and engine start. The sound of the ground personal is most of the times not there. I never had calls from the FO when I checked the flight controls. Even running through the checklist will give no sounds after the push back. When I run through them nevertheless the switches are set by the FO. Before every flight I go to the Center to type down the departure and arrival airport and runways. I always push the button for the Restore SoundGauge.dll. So I am sure the correct dll is loaded. I use a Asus Xonar soundcard. Is that the reason for my problems? What soundcard do you use to test the product?Another point is the sheets that are presented during the preparation of the aircraft. For me the typed dotted characters on the load sheet are impossible to read. My screen is set to 1920 x 1200. The flightplan I get presented is always the same and adds no real value. It is for an A320 while I am flying an A319 for instance. The fuel bill is always from CYVR (if I remember correctly). Wouldn't it be possible to read all sort of data from the FSX flightplan or the Start Center? Some sheets use these data others don't. It would add to the realism if they were more taylored to the actual flight you are making. Or am I doing something wrong?With kind regards,Arjen van GroosNetherlands

No landing checklist possible

Wed, 27 Oct 2010 13:46:33 +0000

Hello,After finishing a few flights by using FS2Crew I've got a problem with the landing procedure. Up to reaching the checklist "LDG - FLAPS" everything works fine. I can switch the flaps positions by using the green button too. But after setting up the flaps to "full" the checklist doesn't proceed with the next option. So I can't run the landing checklist. If I press the green button again after the "full flaps" configuration the flaps callout begins with position "1" again. By the way the landing gear is down.I can't use the green button for calling "Landing" too. If I switch manually from the "LDG - FLAPS" checklist to the next one by using the right arrow, the flaps of the plane will be set back to the "3" position. From the point of reaching the "full flaps" configuration there is something wrong with the workflow of FS2Crew.Perhaps you can hepl me with this problem.Thanks,Patric

APU BLEED ON OR OFF

Tue, 05 Oct 2010 11:30:55 +0000

I AM USING FS2CREW WITH WILCO AIRBUS SPECIAL EDITION 2 WITH FS2004 USING A330-300, WHEN I CALL THE "2 GOOD STARTS" AFTER ENGINE START I GET THE FO CALLING "DO YOU WANT THE APU BLEED ON OR OFF" WHEN I CLICK ON "OFF BUTTON" I SEE THE LITTLE OVERHEAD PANEL ON THE RIGHT HAND SITE BUT THE APU BLEED STAYS ON AFTER ALL. EVERYTHING ELSE SEEMS TO WORK OK .ANY SUGGESTIONS PLZ.THANKS