Flysimware Turbojet Aircraft

Flysimware has released an early version of their Learjet 35A for MSFS through the FSW store. The Lear35A Beta team includes two current Lear35 pilots, and a fellow who is now flying Lear 45s and 75s, and previously was a Lear35 instructor for Flight Safety. See https://www.avsim.com/forums/topic/640722-flysimware-learjet-35a-early-access-released/ There is also lots of related Lear35A info on the Flysimware Discord site. Al

I’’ve read posts. I’ve watched tutorials. But no matter what I do, I cannot bind the Learjet 35 pitch trimming functions to my joystick (Thrustmaster T1600/TWCS). The tutorials say that the Pitch trim barrel switch on the left side of the yoke should be bound to INCREASE AP PITCH HOLD REFERENCE and DECREASE AP PITCH HOLD REFERENCE. So I bind the two buttons that I normally use for trimming up/down on every other aircraft to those commands. It does nothing. (I understand that AP has to be off.) Then the tutorials say the barrel switch only works if the center button is depressed. But I have yet to find a function in the default controls menu that activates that center…

- hello again - after an reinstallation of complete FS2020 there is a problem with the medevac-package. I installed it into the community-folder - result: Navigation-Instruments (pms 50 - gtn 750) show only pink/white squares. What to do about this? The "normal" Learjet-Version shows "normal" instruments. Thanks for replies in advance. Andy

I installed version 1.7.1 into MSFS 2024 using the 2024 option in the installer (ie did not simply copy my 2020 installation over to 2024) now the sim hangs at 96-98% every time.. Disabling the installation allows the sim to start normally. Re-enabling the installation ( using msfs linker) and the hang returns. I have also tried with the installation in the community folder directly, avoiding using Addon Linker altogether but it does not seem to make any difference. I have waited over an hour, so it is not simply a slow start. Suggestions?

Hello - I dare to open a new topic. I downloaded this product - "phew" - 6 Months ago. It works fine, everything. Payload (Passengers) or Patients (at the medevac-livery) were activable via "Tablet" left at the Pilot's side. Nothing must be added by payment. Very important: Also there were three Avionic-Systems I could choose, GARMIN GNS 750 D/750 XI. But - suddenly - ( one week ago or so ) - NOTHING worked as usual. 1) Only one Garmin Avionc (GNS 530 W) is available 2.) NO Payload is activable. Flysimware - I contacted - does not understand my request, I guess so. My last hope - avsim. Grateful for every useful advice! Andreas

I cant get any of the following to work in MSFS. Any ideas where I am going wrong or what the issue could be? 2D PANELS ➔ SERVICE HANGER PANEL = (Shift + 1) ➔ AIRCRAFT OPTIONS PANEL = (Shift + 2) ➔ GPS PANEL = (Shift + 3) ➔ RADAR PANEL = (Shift + 4) ➔ ENGINE START INSTRUCTIONS PANEL = (Shift + 5) ➔ DOOR INSTRUCTIONS PANEL = (Shift + 6)

Hi @Flysimware Just reporting a minor bug with the current version of the Learjet 35A v1.6.1 with the lastest version of MSFS. The cockpit door controls on in the EFB are currently reversed (under Configuration Page -> Doors) The default visual state of the door is open, but on the EFB it shows "CLSD". When the toggle is switched to "Open" and turns blue, the door visually closes. When the toggle is again switched to "CLSD" and turns grey, the door visually opens.

Just got this one (and seen a few updates recently) 1)is there any kind of autoupdater for this aircraft? 2)If not what is the best way to update it - do you need to manually remove the old version each time or can you just update over the top?

I have just purchased the Learjet 35A product, however I was only able to download it once, and the file is corrupted. When I tried to download it again, it says I have exceeded the number of download attempts contacted the developer no reply till time of this report

Hi everybody, I have a kind of a weird trim issue. The trim won't move if I hit the trim switch on the center pedestal nose up or down. with the secondary trim system it works! Can you think of any reason the primary system doesn't work? Last flight it worked with the prim system, but after landing I got the t.o. trim warning light and then again I couldn't move the trim. very strange... I also removed the key binding to my joystick with no effect. Thanks Christian

Hello, how can I uncage the standby horizon in the learjet 35? I am using legacy control mode for the interaction... thanks!

Hello, Looking for help with just downloading from the store. Discord links are expired and I don't seem to get a response from the contact page. So any direction or help would be great. I purchased the new Learjet and my download failed. It says I reached my limit so I'm trying to get that reset but looks like I'm dead in the water with getting support to fix this. Anyone have suggestions?

Hello there, with the PMS GTN750 variant, I am unable to arm the lateral NAV mode. I have a valid flight plan, but the mode will not arm. With the GNS530 this works just fine. Version is 1.3.0. Any help for that? best regards

If yes, where can I view them? I'm thinking of buying.

Hi, The GENERIC_LEAR_AP_SFT_1 does not seem to work. Did you succeed to make it work? Pascal

Loving the Lear 35 so far. Thank you for the continuing stream of updates. Is there a default program setting that aligns with the Nose Wheel Steering activation button that can be assigned to a controller button through the standard program controllers settings and options menu?

Hello, Sounds like a prop jet.

Hi, Is there a way to bind the Reverser ARM switches? Thanks for your help 😉 Pascal

Has anyone else had it when flying the FSW Learjet and using the TDS GTN that on random flights you can't get the Alt Capture to work? It basically reaches the selected alt but doesn't hold and will then start descending or start climbing? I've noticed when this issue occurs the "Alt Hld" button remains lit and you can't toggle it off. Same if you click on SPD or V/S they remain engaged and no way of turning them off. When the issue doesn't occur - Alt Sel and Alt Hold seem to work as intended. When it reaches the FL it switches to CAP and then ALT HLD stays on. I can turn that off and keep Alt Sel on to go to the new FL etc. I thought I had sussed it out when I…

First I have to say, I love this piece of software, the Learjet flies smootly and it´s big fun also regarding handflying. The only concern I have is, when climbing using IAS and flying manually, the Flight Director shows too high pitch, if I would follow it, I´d lose speed, which I shouldn´t. That way I have to fly "below the Flight Director". Using Autopilot I realized it´s pitching up, catching the FD, losing some speed, then pitching down to the correct position for keeping speed during climb. That´s different to the manually flown version, where the FD keeps it high pitch. Anyone else noticed it? Is it an issue of the plane or did I miss some…

First thanks for this great airplane, which is developing better and better with every update. But since v1.1.8 i cannot preselect ALT with my Octavi-IFR. Within v1.1.7 there were no problems, even with other MSFS airplanes. All other settings (HDG, Frequencies, CRS...) work fine. What has happened? Thanks for your help, Markus

No matter what I do I just cannot bind controller for parking brake. Unable to use chocks either. Started from brand new control setup in vain. Regards Michel

Just curious, I may be having some kind of problem as after the recent update my right wing is a pink checkerboard but I also notice after all the sound updates, its a little better but for some reason the fan sound you hear (the classic lear groan) is playing even at idle, so theres no real change throughout the power band it just gets a little higher pitch and a tad bit of rumble, but you always hear the fan sound, if anything it gets quieter at full power. Its literally the opposite of the real Lear... . the reverser sounds are AWSOME! ive gotta say though, i had this jet for P3D and the sounds were way WAY better...seems like the sound set struggle…

Hello and thank you for the hard work you keep making on update. I want to report a bug that doesn´t happen but with the lear... When I start my sim and reach the dashboard, when ever the learjet has been "set before" (prior flight) or if I choose the lear to fly, the sim lowers the machine reaction. However, when reach the flying session, the general performance is ok, assuming the system is managgeing a large file. This only happens with the lear. Are any plans to improve performance behavior?

Hi, I just installed Lear 35a. Everything is working except nose steering during taxi. I can't turn the aircraft on the ground. During takeoff roll, it can turn after increasing airspeed and the rudder becomes effective. I've been using dedicated rudder pedal with toe break. It seems like nose steering of this product haven't been mapped initially. Other airplanes in MSFS2020 don't have such issue. Please tell me how to setup nose steering? Thanks,