FS2CREW: FLIGHT CREW A320

Flight Crew A320 has been updated! A mandatory update is available for Flight Crew A320! To obtain this free update, login to your FS2Crew (or 3rd party) account and re-download and re-install the product. Important: Please allow 3rd party vendors a few days to update the file on their servers. web: www.fs2crew.com Change Log Version 1.5. Release Date: 11 April 2021 Hotkey assignments for the Main and Secondary Action Buttons, as well as Open Main Panel, are now located on the Secondary Panel in the bottom right hand corner. These hotkeys are no longer bound to MSFS stock events. If you do not want the hotkey to be active…

Dear Bus Drivers! FS2Crew is happy to announce our first product for the mighty new Microsoft Flight Simulator has been released! (FYI, it also works in P3D and FSX 😉 ) The new Microsoft Flight Simulator is truly beautiful, but without your FS2Crew "crew" on board it's pretty quiet and lonely 😉 CLICK HERE TO DOWNLOAD! We're offering 5 Euros off for the first 2 weeks only instead of giving out a coupon code for anyone who ever owned an FS2Crew before. No coupon code required! What planes does this program work with? 1. It can theoretically run alongside any aircraft, even a Cessna, since it's a stand-alone program that runs outside of t…

Hello. Is there a way to retain the main sound from MSFS2020 when switching to the FC2Crew panel? I lose the main sound whenever I switch. Thanks in advance.

I had this for the default A320 in MSFS, I can't find it anywhere now, not in product manager, not on legacy website, has it been pulled? sometimes I just want a quicker flight in the default plane instead of Fenix.. I have put off buying this for the Fenix as I use the TCA Thrustmaster Capt Ed and I am not sure if having FS2crew will mean my controls for Flaps etc becomes redundant?

Hi, My memory might be slightly incorrect on this one and if so this would be a suggestion rather than a bring back. Is it possible when using voice control to use the pre-recorded PA announcements? Like I said above I have a memory this was possible on the older releases, FSX for example on PMDG 747 & 777. Might be wrong on that one. Secondly, when starting the pre-flight procedures, the FO announces twice about the walk around. I believe he say's "back from the walk around" followed by "im out for the walk around". Im going to be doing a small flight tonight and will grab it on record for you. Thanks, Nick

2 Feb 2022: We just pushed out new updates for RAAS, PBE and FBW A32NX. Change log here: https://fs2crew.com/fs2crew-change_logs/ Please update via the FS2Crew Product Manager.

My FO always wants to set the pitch trim at 0 even though the MCDU has a value other than 26%. Am I missing something?

I bought Flight Crew A320 a few days ago, I'm enjoying it and it continues to run well, but ... ... deciding to streamline all my procedures, I'm putting them into Excel. I've created a 'formula' with =HYPERLINK: - =HYPERLINK("D:\Users\socen\AppData\Local\vPilot\vPilot.exe","vPilot") This puts 'vPilot' in the cell, I can click on it then after a warning "Some files can contain viruses" blah blah "Would you like to open this file", clicking 'OK' opens Flight Crew A320 as expected and everything works except there's no sound. If I close it and open it through a menu, audio does work. Any ideas? Thanks, Paul.

I own Flight Crew A320 MSFS 2020 and i don' t understand why i cannot download the update version that works also for with A32NX project? and why in them website https://fs2crew.com is missing my version ? no new update ? or just a scam???

I just bought FC A320. First I start MSFS and than, at the Gate at my Airport I start FC A320. Every time I get the error message "error loading FS2Crew Data XML File". FC A320 is installed in default directory, MSFS is installed in drive d: I can use FC A320, but at the end the flight cant be saved, cause XML file cant be found. Who knows a solution? Kind regards Henry

Guys (and Gals), I'm not sure if any of you are still having issues with FS2Crew Crew A320 Button Control due to the due to the new FS2Crew website change over... DNS propagation can take time when you change web IPs. But at any rate, I've prepped a new V1.6 beta that uses a different path for the version check that steers you clear of the new Cart. It works perfectly for me... but if you had the issue, I need you to test since I can't reproduce it. Please send me a Private Message via Avsim with your name, order # and point of purchase, if you want to test it. Only request the v1.6 beta if the XML Warning message appeared suddenly out of the blue the…

hello i just started take an error msg : error loading fs2crew data xml file! ensure microsoft flight simulator is running. any help plz?thats a new msg i didnt have any problem before.thanks a lot.

I need help to get FlightCrew A320 (and Pushback Express) running again. I had bot add-ons up and running until about 2 months ago, when I paused using MSFS. Some weeks ago i started again. Updated MSFS 2020 to the last version (1.17.3.0), and reinstalled FlightCrew A320 version 1.5 and PushBack Express update version 2.1. However after starting MSFS, with the FBW A32NX (or ASOBO A320) at the gate, I get, when starting FlightCrew A320, or PushBackExpress, the message 'Unable to connect to Flight Simulator! Please load the host aircraft first then try again' I have reinstalled the FS2Crew addons, about 5 times now, both as administrator or standard. I have t…

Does FS2rew allow the first officer to fly the plane from take until landing? If so how do I do that? I currently have the button control version for the airbus. Thanks in advance.

Hi, since this week I have a problem that although I have in the settings "Config 1+F" the Copilot reads the checklist back with Config 2 (but he sets it correctly with Flaps 1) what can be the problem? (I use A32NX experimental Version)

Hi, Does anyone know what the triggers are for each of the automatic cabin PA sounds, please? For example: xx_welcome.ogg ... at -10 minutes to departure? xx_taxi.ogg ... on aircraft pushback/movement? xx_meals.ogg ... above 10k feet? xx_arrival.ogg ... ? xx_taxigate.ogg ... ? Thanks very much! Mike

Hi Bryan, Thanks for this update. I have, though, some remarks. No longer do I see the "Connect to FS2Crew" screen after FS2Crew has fully launched. The initial screen now is the "Before Start Check List" one, no matter whether if I had my FBW A32NX setup at a gate/parking or at a runway (where the plane is fully configured already for take off). In previous versions this worked as described here. For example, when I started the A320 at, say RWY 14L at EDDK, after hitting the "Connect to FS2Crew" button Fs2Crew would present me with the "Ready" window. In this version, 1.5, The "Before Start Check List" is being displayed. When I would like to startup at gate C5…

They are absolutely no valid reasons to impose us to update to the last version. I urge you TO STOP this in the future. I buyed this application and want to have the freedom to adopt or not your new versions. Moreover, your upgrade process is just a big mess ! You are directed to a page where you have ton's of choices and when you select the link to the product, you come to a page where you just can do nothing. To download the new version, I had to go to my shop transaction history page and link from there, to a download page. Something which is not really intuitive, I must say. Maybe I am stupid, but it took me more than 15 minutes of searches, to finally find the s…

hi, after departure, i pass 10k and the cabin crew announce to prepare for arrivals, i get it that is should be in the decent but not in the departure, any help please thanks

Hi Bryan, After I installed the mandatory new update of this app (version 1.5), I get an error message "Exception received 3" after I updated some of the settings. What might have gone wrong and what can I do to get things working again? Thanks, Hans

Hello, is it possible to use the earlier version. I prefer that version as the program does not control the lights. I prefer to do that. Could a option be added to disable light control? Thanks

Just purchased FS2Crew: Flight Crew A320 (Button Control) for MSFS 2020 and all went well except I cannot open the icon on the desktop to open the program and when I start MSFS its nowhere to be found? Please help

Hi, I'm not so keen on changes done in FS2Crew A320 v 1.4. It controls things I don't want and it doesn't control things that were controlled in previous versions. It newly switches on autobrake before take-off, tampers with landing lights at 10,000 feet and it even switches off fuel pumps during parking checklist. Wouldn't it be possible to let the user choose what the virtual co-pilot controls? And also one useful feature - "taxi lights off" when approaching a ramp is gone. Co-pilot calls it but the switch stays in on position. I'm going back to 1.3 for now. Thank you for your reply

Since today, Flight Crew A320 asks over and over again to download the most recent update. I re-downloaded the installer from my FS2crew account (order list) and launched it, but didn't work. I even uninstalled the program and re-installed it. I restarted the PC and the sim a few times, but it keeps asking for this damned update. What I have to do??

hello why i dont hearer sound Passengers??