FS2CREW: FLIGHT 1 ATR (FSX)

ATR Drivers,Update 1 is now available via the Downloads and Service Updates page on the FS2Crew website at: http://www.fs2crew.comUpdate 1 does two things:1. The panel.cfg files were updated so that you may now load a default aircraft prior to loading the FSX ATR. This should also correct a select activation issue a few users experienced.2. As per a user's request, you may now hold down the left/right mouse button to quickly cycle city selections on the PA page.Please read the Update 1 PDF manual!!!! It contains important info! An option to open the manual is available on the final install screen!Cheers,Bryan

ATR Drivers,At long last, FS2Crew for the Flight1 FSX ATR is finally available!!!We didn't think it was going to happen, but we were able to pull-it off!A lot of work went into upgrading the ATR to meet the latest FS2Crew/FSX standards, and we hope you will enjoy the fruits of our labor.Important: If you own the FS9 Version, you MUST read the manual again. There are MANY important changes!!!A discount coupon/option is available to anyone who owns "any" version of FS2Crew.The FSX ATR Edition may be downloaded via:http://www.fs2crew.comDo not forget:You MUST have SP1 for the FSX ATR installed prior to installing FS2Crew. SP1 is available via the Flight1-ATR website.Cheers…

I'm not seeing the ATR fs2crew anywhere on the website...i have the fs9 installer saved and id like to install for fsx...

Gentlemen, I installed the ATR with the latest service packs bought the FS2crew over the previous weekend so that has all the latest updates incorporated. My problem is that when selecting the main panel and pushing the green button, I do not get the activated voice line and I cannot get the panel to activate, and thus cannot get any of the secondary panels to activate either. I am running Windows 7 64-bit and I have FSX set to be run as administrator and also the FS2Crew startup centre to run as administrator. I would appreciate any assistance! Kind regards and many thanks in advance.

Hi I have been going through the tutorial when I move the CL2 to auto I've found the single channel on the pec panal but I can not find where the low pitch illuminates on any panel can anyone point it out to me Thanks in advance Alfy

Hei have a little problem with ATR fs2crew.I can not see the remaining time on the main panel. When I press the activate button I hear the activation sound, but I can not see how much time is left.

Hi Bryan, yesterday I installed the update for the Flight1 ATR for FSX. Because I'm addicted, of course, FS2Crew for the FSX ATR. I installed the main program, and configured according to the manual, then installed the update 1 and configured and because i have the separate model update or the ATR, I also use the Update 2 for this model update installed and configured. Then I wanted to start the ATR from the FSX menu and had a CTD,right after selevting the plane. I thought probably I have done something wrong in the installation, uninstalled the whole and tried loading it again, but again CTD Later i figured out, that if I only install the FS2Crew main p…

Hello there, yesterday I was trying to figure out a "ready to taxi" startup state with fs2crew. From what I've seen it seems that it starts with the before taxi checklist, and then we follow the normal procedures. Is this correct? Regarding the aircraft, I'm usign the "ready to taxi" config state of the atr. Once the aircraft is loaded, I set up the FMC as required, perform the pushback and then start fs2crew and go through the before taxi checklist. What else should be set on the aircraft before firing the before taxi checklist? Thanks in advance

Hey Bryan. First off, Happy New Year. May 2012 bring you great things. (especially a 737 SDK) Anyway, purchased the ATR a couple weeks ago and have finally had a few successful flights without FS2. Wanted to "learn" the aircraft before attempting to fly with a copilot. However, since using FS2 I am having an issue with the FO speaking two or three phrases from different checklists at the same time. I'm not rushing the button clicks and following procedures. Tried a reinstall, same thing. Any ideas?

Hey Bryan. Sorry to trouble you this close to the Christmas Holidays. Decided to try my hand at the ATR. Already have the J41 as well as numerous PMDG aircraft and the Level One 767 so I'm no stranger to most of the systems and procedures when it comes to the FMC/FMS. However, I cannot for the life of me figure out how to delete the 'discos' in the ATR FMS. I have done what the manual instructs, press CLR until 'delete' appears and the click the appropriate line item. This does not work. I am trying to load your tutorial flight and the line items on page two of the routes setup are: AAAAA and below that, AAAAA. These have the text, "then", followed by, "route discontinuit…

HiTrying to set Comm 2 to 131.95, but it won't transfer to the active freq - any ideas? It just briefly flashes "Act"in red when I hit the xfr switch. Doesn't work for Comm1 or 2 or Nav 1 or 2, but does for ADF - Sorry if it's posted elsewhere - I did search! (have closed all idle programs, not even got Rex2 running in case!)FS9, win 7, i7 sandybridge, nvidia, FS on separate 1Tb drive, TrackIR5Steve

Hi everyoneI have just fitted a Gainward GF GT240 and find that the ATR does not load up correctly. I can see the shape of the aircraft inside and out but in very minimal white detail, the same happens with a few other aircraft but none of the default ones and not with Aerosoft's Piper Cheyenne. I have none of these problems with FS9 where I have the ATR also loaded. Can anyone give me a handholding solution to this, try to be untechnical if possible.Best wishesFlapless

Disregard

Hi, First of all I would like to apologize for my English.I am a new user of FS2Crew . After installing the soft acoord the manual everything went great.Beginin the flight (loaded directly fom FSX menu and with 2d panel activated) and everything seems ok.Star fs2crew and it seem that all ok. However when Fo show the tkaeoff data card, Inside speeds cell V1, V2, Vr ... etc appears 0 valueIt seems that does not detect the TOW, it also shows the value 0.I set up the FMC correctly (not discontinuity, an define altitud for a destination waypoint). inthe VNAV page, dont seem the TOD, but i ask at flight1 atr forum and it seem normal, because they say that TOD not shows until 20…

A user created this very nice FS2Crew - ATR video...It shows the software in action quite well.http://www.youtube.com/watch?v=_QMT9Av8OPUCheers,

edit: please get this into the fs9-ATR-Forum. - sorry -Hi Support,...sorry, not he best english...I have become FS2CREW from simmarced.and "in the beginners-school" troubles with it:First erreor:While loading the FS9 comes an Error:"GAUGES\fs2crew\atr\FS2CREWSTAND.GAU"cannot used and must be deaktivated.The FS9.1 also is starting.So, when i load the Flight1 ATR then comes this error: Problemereignisname: APPCRASH Anwendungsname: FS9.EXE Anwendungsversion: 9.1.0.40901 Anwendungszeitstempel: 4135a208 Fehlermodulname: atc.dll Fehlermodulversion: 9.1.0.40901 Fehlermodulzeitstempel: 4135a88e Ausnahmecode: c0000005 Ausnahmeoffset: 00013a53 Betriebsystemversion: 6.1.76…

will there be a voice commander version for The FSX Flight1 ATR Edition??

i had fs2004 flight1 atr then, i upgrade it to the new fsx version to use it on FSX, but i figure out that propellers missing in the cloudy weather ..or it's better to say it this way that they disappear in the spot view of the aircraft...!!! so anybody hear knows what to do to solve this missing texture???

I just got a new T Flight X HOTAS from Thrustmaster. I have 12 buttons to assign various commands, including two for the Main/Secondary functions.I read in the FS2Crew ATR manual that you can assign commands from the keyboard. This would free up two more joystick buttons for stuff like spoilers.But if you look at the possibilities on the keyboard, most of the letters are taken for FS default assignments.Does anyone use keyboard assignments for the ATR main/secondary functions?Eytan Ornstein

I am having a problem with FS2Crew where it starts from a cold and dark situation in the mid flight. It has happened now on three occasions, usually right before descent. Any ideas on a fix or work around? I start all of my flights with the engines running and skip the pr-flight checklists and procedures using the 'Set Startup State' button, and all is well until close to TOD.ThanksKevin R.

Hi All,I recently became a excited fan of FS2Crew as I had purchased it for PMDG's fantastic MD-11, and was blown away by the immersive facet it brought to flightsimming ! So I decided to make the plunge with this great program for my other complex addons, one of which is the beautiful and complex ATR 72-500 model from Flight 1, for FS9 and FSX. Well, I decided to proceed slowly and install one at a time and then test them as advised by Bryan. But, I can progress no farther in FSX, as I continue to receive CTDs when I try to load the ATR from FSX's main menu. It is specifically stated that there is no need to load a default aircraft first. But, I keep on getting these ctd…

It is the second time I have a problem with the "Before Taxi" Checklist. FS2Crew have stopped before this point, the FA told me "Cabin ready" but if I push my "green" Button, the FO tolds me "Why should we do that not a little later" and nothig happens.DEP BRIEF MODE is BEFORE TAXIIs there a trick to start the BEFORE TAXI checklist?Which reasons are possible for that stop, have I forgotten anything important?Could it be a problem with the "FS2Crew ALTITUDE Menu", I klicked that by mistake before?Is it possible to jump to the next checklist at this moment?I have tried to release my parking brakes at that point, but it doesn't helps.It is very disappointing if there is no p…

Need a little help, im not getting notification from the FA that cabin is secure for landing . Therefore no app checklist or anything after. TOD point os calculated and is in descent mode. Anything else that I may be missing to get app checks and following procedures??

Check this one out, after several attempts I am heading out to the runway and am doing the before takeoff list and my keyboard stops working. Will not except any commands.I uninstall FScrew and it works fine all through a flight.Any ideas,Hawk Hunter

Hi BryanI purchased both ATR FSX & Level-D 767 FS2Crews last week. First time with your software addons.Firstly for what I have seen so far I am most impressed and it has re-ignighted my interest in FSX, so thank you.My questions are relating to the ATR as I have not tried the 767 yet (and I accept you have partially already answered it in a previous post) after T/O and at the inital climb do I understand correctly that you select HDG and then LNAV straight after on the autopilot? .... Do I hit 'Z' first before doing this to engage autopilot?Secondly I had the FMC set to 5000 doing your tutorial flight (Jeju --->Busan) and I never left this altitude , I assume soon…