FS2CREW: FLIGHT CREW X
35 topics in this forum
-
Captains,FS2Crew's 3rd year anniversary is coming up in a little over a week. To mark this occasion, a special bundle/compilation product was created.It's called "Flight Crew X: Gold Edition".Flight Crew X includes FS9 and FSX versions of FS2Crew released between November 15th, 2004 and November 1st, 2007.FS2Crew versions included:*FS9*- PMDG 737NG (800/900/600/700... You must own the 800/900 models).- Default 737- Default 172- Flight1 ATR- Level-D 767- PMDG 747- Default 747- Wilco FeelThere A320*FSX*- Level-D 767- Default 172- Default 747- Wilco FeelThere A320* All current and available FS2Crew software updates as of 1 November 2007 are built into Flight Crew X.* A spe…
-
- 8 replies
- 16.8k views
-
-
Hi, I purchased FS2Crew a while and got an email for update etc, downloaded the files and installed but it asks for a serial number, so checked through emails and couldn't one, so finally found their legacy website, logged in but no serial number, repiled to the email but no response, anyone got any ideas how I can recover my serial num,ber
-
- 1 reply
- 970 views
-
-
hiya, i was wondering if anyone could please tell me how to activate this once you in the cockpit, what is a flaps indicator, surely its not the dial for the flaps and my 2d cockpit is no longer there and it is all installed properlycheers joe
-
- 6 replies
- 4.4k views
-
-
Hi everyone. I have a quick question regarding FS2Crew - Flight Crew X: Gold Edition. Does it use any kind of DRM or product activation? I don't mind a product key, but I want to protect my investment. Also, could I get a bit of clarification as to how the gold edition differs from, say, FS2Crew - Airline Pilot Xtreme and the Heavy Hitters Professional Pack.
-
- 2 replies
- 2.5k views
-
-
I would like to congratulate you on a great product that is really enhancing my enjoyment when flying the new iFLY737. However, I have one problem that is becoming increasingly irritating. The pilot's volume is quite a lot quieter than the FA, in fact the FA screeches out at the top of her voice when she arrives at the cabin door! Is there a way of decreasing the volume of the FA? Also, unless it's my imagination, but the volume of the pilot seems to decrease compared with the FO as the flight continues.
-
- 9 replies
- 5k views
-
-
I need help, I have installed FS2Crew and followed the instructions as best I could. When I open the sim and go to the Just Flight 737PIC and go to the view menu and open one of the Panels (main panel or configuration panel) they open but the panel is all black and won't do anything. What have I done wrong? Thanks
-
- 5 replies
- 2.8k views
-
-
I need help with the FS2Crew 2010: 737 Voice Commander Edition.When i open the fs2crew panel is the voice button on off and i gat get in on on. i have fs passengers need to uniinstall that? please help me BRYANREGARDS LUCAS
-
- 1 reply
- 2.5k views
-
-
Hello Bryan,Could you inform us about (hopefully) future Voice commander projects?Up until now, the new generation FS2crew aircraft's are all mid-range aircraft.Since I really like to fly the Wilco Airbus series 1 and 2, and also PMDG MD-11 and 747, like many other simmers do, I really should like it, if there should come Voice commander versions for these aircraft too.Any chance???Regards, Henk
-
Hi, is there any chance to get more destinations into the FS2Crew module?
-
Hello;I haave a question about the sound from the FS Crew,I am barely able to here the voices,I can here ATC alright,but the sound from FS Crew,is barely recognizable over the other aircraft sounds,is there a way to turn it up.Mark
-
- 1 reply
- 2.4k views
-
-
Good Morning,I have the newest FS2Crew for the 747-400.After I had the push back, the start crew clear me to start all 4 engines.Auto start is on, Ignition is off.With my Main Button I ask the FO to start engines 3 and 4. What I see is that the FO starts 1 and 2 and not 3 and 4.If I ask the FO with the main button to start engine 1 and 2 he disconnect 1 and 2.Engine 3 and 4 are still offThe only solution is to start all engines by CTRL + E.What can I do Thanks in advance.Henk Scheffer
-
- 2 replies
- 7.7k views
-
-
Good afternoon, (in the Netherlands)I've installed FSCrew for PMDG 747-400 and, of course, Start center April 2009.I put the data into the start center. For example, My Name, Dep. Arpt, Arr. Appt. and so on to use it for all the paperwork during the pre-flight.I save tha data, but what ever I do. I didn't see the data on the paperwork such as the load sheet, the PDC and so on. I re-install the whole FS2crew and also I re-install the Start center, but nothing happend.What do I wrong or what do I forget.Thanks in advanceHenk [email protected]
-
- 2 replies
- 3.2k views
-
-
I purchased 3 products in June of 2008.FS2Crew FSX Level D-767 EditionFS2Crew FSX Flight1 ATR EditionFS2Crew FSX Flight Crew X: Gold EditionI just reinstalled MS Flight Simulator X and wanted to get back into the game again, but I'm currently lost. I'm not sure why I purchased the 767 and the Flight1 ATR, and THEN purchased the Flight Crew X Gold Edition afterwards considering that the Gold Edition has those packages anyways.I know I need to redownload the Flight1ATR and the D-767 plane, but for whatever reason I'm getting errors trying to start the FS2Crew start center for the Gold Ediition. I was able to redownload the Gold Edition fine, but it doesn't work.I run Vist…
-
- 6 replies
- 3.2k views
-
-
Hallo,I buy FS2crew for wilco vol 1 and 2 from aerosoft.works perfect. Today i download and install the FlightCrewX.After install the Start-Center open and the FS2crew for wilco vol 1 and 2 are not showing in the Start-Center,only the feelthere A320 ?I deinstall the FS2crew for wilco vol 1 and 2 and install new.After this, feelthere Airbus SE is showing,but the PMDG 737 not !?Download the new Start-Center don
-
- 11 replies
- 4.4k views
-
-
Hello,Since the avsim file library still isn't fixed yet, could someone send (or give the link to me) me the Level D 767 British sounset for FS2Crew to my e-mail address (PM for it) As the file library currently has none of these files. Thanks,suddste
-
- 4 replies
- 2.8k views
-
-
Is it possible to make a key board function to toggle the different checklist levels instead of doing this via the Main panel left/right arrows with mouse clicking?Errol
-
- 1 reply
- 2.6k views
-
-
Probably an extremely dumb question, Bryan, but how do I find the PA, FO and other FS2Crew sub-panels in the LevelD package. Read through the manual but only seem them referenced... not how to get there.Thanks,Jeff EvenRocklin, CA, USA
-
- 3 replies
- 2.8k views
-
-
Attention Flight Crew X users:Should your Flight Crew X specific version of the FS9 Start Center be overwritten by the regular FS9 Start Center associated with the stand-alone versions of FS2Crew, please download and run this small program.It will restore your FS9 specific version of the Flight Crew X Start Center.http://www.fs2crew.com/cart/Updates/Flight...StartCenter.zipCheers,
-
- 0 replies
- 2.1k views
-
-
Hi!I just installed the FS2Crew for the Wilco Airbusses (I have VOL 1 and 2).After starting FSX and choosing a Airbus, I got 2 messages which I confirmed with "yes". After that, FSX simply crashes. Same issue with all the airbusses (which worked very well BEFORE installing FS2CREW!!).What is the problem?I operate FSX under VISTA.
-
Please i can not instal corretly. I have instaled de first FS2Crew and now i buy the FSX Flight ATR Edition and in the FS2Crew start Center on the center window they are not " Restore Original Flight1 ATR Panel Config Files" but yes "Set Panel Config Files for FS2Crew ATR".I make the reg Chek and is ok i find de fsx in "local_machine" when i push boton to "Save" a warning message said "sorry, unable to find This flight atr Panel CFG file"I do what BRIAN told me to do, FS Registry Repair and reinstal FSCrew but NO Results. Please my native lenguase is not english i do my best to explain everthing, be kind and tell me with basic english what i have to do step by step...I al…
-
- 7 replies
- 3.8k views
-
-
helloFirst sorry about my english it's not native.1. Sometime ago i buy (Flight1) first edition FS2Crew and 04/09/2008 i buy at FSCrew FSX ATR Edition Download pag the last edition of FS2Crew FSX ATR Edition my order number is:1306.2.i think i make a correct instalation but when i open the FS2 start center and after open the section "Flight1 ATR" and "click" on the "save" buton i cames a message: "sorry, unable to find this Flight1 ATR Panel CFG File". 3. I try everthing i download 4 times the same program trying to repair the file but no away.4. Also the Flight One ATR Configuration Manager for FSX it is not on my computer.5. I dind't buy this time the program to Flight1…
-
- 1 reply
- 2.7k views
-
-
Bryan,I accidentally installed the May 2008 start center into my FCX installation, and lost the PMDG 737 tab, which was replaced by the Wilco Airbus: SE tab. Is there a way to get the old start center back?Thanks.
-
- 1 reply
- 2.3k views
-
-
Brian I just downloaded fs2 crew and the level d 767, but when i go to the fs2 crew start center i get this message:FS2Crew Level- D 767 Edition not detected, functions on this tab will be INOP.I get this for all the aircrafts including the default 747what can I do I have had nothing but problems trying to get fs2Crew to work with the 767, it works great with the boeing until i did this reinstall on fs2 crew and the 767Thanks for the help
-
- 1 reply
- 2.3k views
-
-
Hello,I have purchased on June 2008 Flight Crew X: Gold Edition through Simmarket.Where can I find the updates? In the update page I can only find the "Flight1 wrapped" version of it.Thank you.Alberto
-
- 2 replies
- 2.5k views
-
-
Hello guys I am having a few issues and I was up late last night trying to understand everything. I have FSX with the Acceleration expansion. Here are my questions:1. I purchased Flight Crew X Gold along with Airbus Vol. 1 Deluxe as well as FS2Crew Airbus Special Edition. Before I either patched the start center or downloaded the new start center I used to have this long black bar in my game that went across the screen that had a bunch of voice commands and things, like for the FA, FO, and PA. Now I don't have that anymore and only have the Checklist voice box control. What did I do wrong?2. I also bought some other add-ons like Active Sky X and XGRaphics along with …
-
- 5 replies
- 2.5k views
-