FS2CREW: LEVEL-D 767 (FSX Button Control)

Hi Bryan,Have just purchased FS2Crew for the level D, do I need the Update that is posted above ? And if I do, can you fix the link to the update, appears to be not working.Many thanks in advanceJulian

Hi, I have been using FS2Crew for Leveld 767, PMDG 747 and Wilco A320 for some time now. All was fine until I installed the winglets version of Leveld 767. When I went through the checklists, and got to the control stick and rudder check the Green button stopped working. I have reinstalled FS2Crew once and got it working again. But I noticed that since downloading and installing a new livery for 767 winglets it has stopped working again. Any ideas what the problem may be?ThanksAcra24Intel Core i7 880 3.07GHz16 GB RAMWindows 7 64 bitFSX SP2.

Dear BrianPlease would you consider making it possible for FS2Crew to run OK without having a joystick plugged in? I cannot take a joystick with me when I'm travelling, but would still like to use FS2Crew sometimes, travelling light and just using a mouse.Or perhaps there is a workaround?Thanks for considering, and thanks for a great product.cheers,Dominic

hello,i'm struggling with the fmc.the manual tells me to complete fill in the fmc with 15 minutes remaining. so i did.but everytime after (or during) starting the engines the fmc numbers i filled in are completely vanished.what could be the problem?Also another thing i encountered(and maybe it has something to do with that fmc thing.) it takes a lot of time from the moment i start one engine and the moment the both engines are stabilized.A complete pushback from a gate and still the first engine is barely stabilized, the other engine must be started yet at that time.in the meantime the pushbackofficer says '; pushback complete set parking break" and then the fo turns off…

I wonder if you have the voice packet in Portuguese - Brazil?

Level-D recently released a Winglet update for the LDS 767.I just tested the FSX and FS9 Winglet Update with FS2Crew 767 Voice Commander.FSX Version:The only thing that connects FS2Crew to the Level-D 767 is the FS2Crew modified panel.cfg file.The panel.cfg file used by the Winglet model "aliases" the panel.cfg file used in the regular 767.In other words, it uses the same panel.cfg file used by the normal 767.Therefore, so long as your panel.cfg file for the normal 767 has FS2Crew entries on it, you shouldn't need to do a thing.FS9/FS2004 Version:Unlike the FSX version, the FS9 Winglet version does NOT alias or share the non-Winglet panel.cfg file.Therefore, you have to c…

Hi, I would like to add new cities to the CRZ message (so the capt will announce the actual destination), is it possible?Thanks

Hi guys. Almost every time I get an emergency, its an air rage situation. The way I fly, I don't blame them. Hehe. The point is, I got my first sick pax today, and I thought it was really cool. From what I could gather, the FO radios Operations of British Airways in London (do HF radios have that much of a range?) and asks them to patch them through to First Call offices (can other airlines contact speedbird and make such requests?).When that happens, the captain passes along some numbers (the pax's vital signs? Do the FA obtains those?) and based on that, gets a recommendation.

Hello all.Fantastic product. Absolutelly must-have.I must ask, though,do anyone else experience this? When starting fs2crew 1 minute before pushback by using the blue button, the FO starts the engines but fails to do *something* (I wish I knew what!) that enables the avionics. In other words, engines start OK but my EFIS, EADI and other screens show blank data (they are not off, they just not show data), my TCAS is INOP, my A/P doesn't works and so on. I´d have no problem doing whatever needs to be done myself to set, but I have tried to find a switch on the overhead that reads "avionics" or something similar and can't find one. Starting normally from +30, the screens ar…

Hi,I'm using Windows 7 64-Bit and everything works fine on the LVLD FS2Crew, except the Green and Red buttons, which is a big thing. I don't have a joystick (yet) so use the keyboard but when I press the default + and - keys for the red and green buttons, nothing happens. I changed the buttons to the 9 and 0 keys, still no success. I made sure there's no FS and FS2Crew key assignment overlap and tried various other keys but to no avail.Any help please? i can't use this addon properly without this. Thanks!

Bryan,After a year, I am pulling LDS767x from hangar.I reinstalled FSX LDS 767 / FSX767 Fs2Crew and WC Mod without any problem...BUT, when I installed Fs2Cew 767X WC mode disappeared and regular 767X screen appeared. I reinstalled LDS767X , WC Mod and Fs2Crew with UAC activated. Still Fs2Crew overrides the WC. I remember, this happened a year ago, but I forgot how to correct it.Thanks

Hi Bryan,after having used the JS41 voice, which I find particularly brilliant, I tried to go back and complete a flight using the lvl D 767 with the 'old' FS2crew system.All worked well throughout flight until I started my descent. At this point I noticed that FS2crew had stopped working somehow.Having installed JS41 laterly, would this have interfered with my level D setup?ThanksWillie GPS Hope the ankle gets better soon - I'm currently waiting on a knee replacement - swap?

Is their a FS2CREW 2010 version with Voice Commander for the Level D 767? I have the FSX Default 737 with Voice Commander version and its really a exellent addon. I just bought the Level D 767 the other day and after my experience with the Default 737 and Voice Commander.....I don't want to fly any other way now :)

Hey all ive been doing a flight and would like to do a return flight without reloading the plane is it possible to reactivate fs2crew?

I need a 763ER Checklist that works with the Actual FS2Crew Procedures. I know there is one in the manual but I want one that could fit on two pages at most so I can print it out and use it easily, Thanks.Jordan

I might be doing something incorrectly, but after I press the "Green" button to start the right engine, the engine starts correctly. However, the first officer turns off the APU before the second engine is started. I then have to manually start the APU and start the second engine myself... Any ideas?

When do I receive, or on which sheet, the Center of Gravity information? Currently, I get that from the LVLD Configuration Manager... Shouldn't it be with the load sheet or the Pax & ZFW sheet?Maybe I am missing it somewhere...Thank you for your help in advance!

Hi,I was flying around my new kord fsdreamteam ariport and all of a sudden the sim crashed with the below error. I was not using fs2crew when it happened-Error below.Sorry it's in Italian.-----------Nome dell'applicazione che ha generato l'errore: fsx.exe, versione: 10.0.61637.0, timestamp: 0x46fadb14Nome del modulo che ha generato l'errore: fcrew11.GAU, versione: 1.0.0.0, timestamp: 0x441da57aCodice eccezione: 0xc0000005Offset errore 0x00001978ID processo che ha generato l'errore: 0x930Ora di avvio dell'applicazione che ha generato l'errore: 0x01cad4eb2eebcce2Percorso dell'applicazione che ha generato l'errore: D:\FSX\fsx.exePercorso del modulo che ha generato l'errore…

Hi Everyone:I have taken 3 flights with FS2Crew, each terminating at NY JFK. For the first time ever, every time I try to capture the ILS for 22L, it seems the aircraft goes crazy - it just gets close to the capture, and then starts to take on a mind of its own instead of capturing the glideslope, turning in circles, or just flying aimlessly while the wings seems to rock back and forth. I never had this happen before in the 767. What am I doing wrong? I can't even seem to get the autopilot to track the heading once this happens. LNAV becomes useless, and nothing seems to work normally after this. The only way for me to fly the approach seems to be to try to hand fly…

Hi dudes,I have been considering the level-d 767. Should I get it. I thought I might try a smaller sized aircraft. I just came off from the PMDG 747. Massive aircraft.I do recommend it to the level-d 767 pilots. Can you guys just tell me good things about it. Or also some bad stuff.Thanks guys.Look forward to be part of the level-d 767 pilot!Sean Averre

Hi Everyone:I just spent this week reading the entire FS2Crew manual and tonight I (twice) flew the tutorial flight from KSFO to KLAX. For some reason, I cannot figure out how to call for the taxi clearance. It says to do so on page 39 (step 12) of the tutorial, butI can't seem to figure out how to do this. Does anyone know?Thank you.Chris Catalano

Hello,I wanted to find out if the British voice set released by Graham Jackson for Fs2Crew in Fs9 will work for the FSX version as well? Thanks,Sumit Sehgal

Hi Ben,I was wondering how to add joystick (in this case for my Saitek Throttle Quadrant buttons) assignments for the green and red buttons in FS2Crew? The manual is very brief and I don't understand how to match these button numbers to my throttle buttons in the start centre.ThanksAndy

Bryan,I have been using FS2Crew for the B767 for a while without problems. Unfortunately, I had to re-install all software after upgrading my pc specs.Since then, I have been unable to allocate a red/green button to my saitek pro yoke. Everything else works well including the FS2crew program. But, no matter what I try, I cannot get the pro yoke system to enable selection.Do you have any idea what may be causing this new proble?ThanksWillie G

Hi I just purchased the fs2crew for level D fsx and I'm having some issues and we would need some calrifications please.After doing the departure briefing, the mode changes "Bstart" but there's no before start check list being done and as for the engine start, I can only have time to start one engine. Once teh engine is start the FO turns off APU an dturns packs on without giving time to start the second engine.I usually start one engien at the time when I'm not using fs2crew. Is there any tutorials that will give me step by step how to use this great addon.Keep up the good job