A320 Family Immersion Support

Hi . Aerosoft A320 Volumetric Lights are not working . They do work in Preview Mode. I also have the QW787 and the Dash 8 I don't believe they are working on these also. Can you help Thanks

I don't like the look of the engine smoke, flying or in the air. It's way too much and all I see are the squares. I deleted the shaders and rebuilt with no change. The smoke option is off in the Immersion Manager.

Hey Guys, i love my A320 Professional Bus. But what i am really missing, is the Airbus Family Immersion package. Is there a way to get this work in P3D v4.5 and with the A 320 Professional? Is there a work arround? A fix or something like that?? Or will be there a update soon? Regards Marius

I apologize id this has been answered before, but I can't find it. In regard to the A320 immersion compatatilblity, I am unsure of which version of the Aerosoft Airbus family I actually have. I am unsure if it is the "X", "Extended" or whatever version. I recall purchasing it as a bundled A318 /319 A320/321. None of the documentation mentions "Extended". The only thing I have to go on is the version of the software is "1.31". I would like to add the Immersion product if it will work with my software. Thanks Mike

Hi, Recently saw your presentation at Cosford and have always liked your immersion products, however if I were to buy the Aerosoft Airbus immersion now would it still work with the hopefully soon to be released "2018" or "Professional" edition (what ever its going to be called) for Prepar3d V4? I realise the product is already P3D V4 ready but will it port over to the new plane when released. Just don't want to buy something I not going to use. Thanks

HI, i own the steam edition of the aerosoft bundle. The a320 family immersion software is unable to recognize this and asks me to install the aerosoft airbus. please advise how to resolve the issue.THX

Guys, I deleted 320 in mi p3d because i migrate to v4. But in vfx central still apears . I click in unistall but i have this message: Yo uneed t ohave at least one compatible simuator install to use this product. I want a complete unistall un vfx central. Thank you.

I want to uninstall my FSFX package for A320, BUT I can't find anywhere on my HDD where I can uninstall it. It's not under control panel / add remove programs, not in Start menu under FSFX packages, there's only the VFXCentral. And there's no uninstall option anywhere in VFXCentral. So how can I uninstall it? Jlund

Hi All , Anybody can confirm if Fsfx work with the320x FsLabs !! Sid

Hello, i'd like to install A320 Family Immersion, but i can't login. In VFXCentral i got the message "Your email has not been validated yet, please check your email inbox.", though i didn't get an verify email. On the fsfx homepage, i got the message "There was an error on our side. Please try again later. ()". Can someone help me? I already bought a activation key for the package. Thanks. Best regards Aviation896

Good evening guys, I purchased the A320 Immersion pack and I get the following message while trying to download through VFX Central "The target aircraft must be installed for this product to work. Please refer to your product's manual." I purchased the Aerosoft Airbus through Steam and not direct from the Aerosoft Website - Is this the problem? The Steam version of Aerosoft Airbus is March 2017 so I'm assuming I have the most up to date one. Appreciate any help Kind Regards Mick PS: Congrats by the way on ChasePlane, its a terrific piece of work, you guys blow Ezdok out of the water on this one!

Hello when i try install the A320 Immersion appear this error: Installation Error: System.Exception: PanelCFGGaugeLineNotFound at c.a(Boolean A_0) at VFXCentral.MainWindow.a(Object A_0, DoWorkEventArgs A_1) at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e) at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) Unable to find the gauge line in panel.cfg

Hey Keven I have a good performance flying the bus at 30 fps. In cruise or generaly when the contrails are in place the fps drops down to 16-20! in descent when the contrails are gone the fps goes back to 30! On FSX DX9 Any ideas? Max

Hello, I have a small problem whereby FSFX isn't seeing my P3d installation and not providing the option to install to it. Is there any way of forcing FSFX to recognize the path? P3d is installed to the path: D:\Lockheed Martin\Prepar3D v3 as it runs on a seperate hard drive.

Hello, I purchased the A320 immersion package and noticed the following. Departed, gear retracted and flying through some clouds; the volumetric lights become visible. However, I also see a light on the place of the nose gear, althoug it is retracted! Anyone else experiencing this?

I've just bought the add on A320 family immersion for Prepar3dv3. I bought it on : The Flight Sim store.When i click on direct install, there is an error message : "The target aircraft must be installed for this product to work. Please refer to your product's manuel". How can I install it ? Thanks

Just bought A320 Immersion. Have Aerosoft Airbus Extended installed. When I run VFX Central I get the message "The target aircraft must be installed for this product to work. Please refer to your product's manual." Any suggestions? I'd prefer to not have to reinstall AE. Howard

Hi guys, just a quick question: Will A320 Immersion work with the other Aerosoft products like A318, A319, A321? Thanks in advance, Piotr Edit: Just got it: Minimum RequirementsAerosoft Airbus A318/A319 or Aerosoft Airbus A320/A321 Sorry

I bought the A320 Family Immersion and I have Aerosoft A320 Extended install into FSX Steam Ed. I tried to run the installer from VFXCentral and it keeps telling me that It can't find my aircraft. Is there a fix for this and btw I have PrecipitFX, 777 and 737 Immersions install and working perfectly with the exception of this problem with the A320 Family Immersion. I'm running on a Win10 Platform. Please let me know how to fix this. Thank you, Steve B. [email protected]

Heya all, I've installed both PrecipitFX and Immersion for A320 and it looks as if it's modified my Aircraft.cfg properly and put the relevant files into my effects folder but i do not see any effects at all. I've tried turning them on and off in VFXcentral but still nothing. I've gone through the posted checklist in this forum and checked file paths etc and all seems fine. The default effects are working -i've been trying it out using both 'grey and rainy' and 'Major Thunderstorm' simply in order to get a wet runway to check for wheel spray effects. I have also uninstalled VFXcentral and reloaded but no luck there. Is there any way of completely uninstall…

I do not have contrails with Immersion installed. I set up a test flight in winter above Anchorage at FL380. When I run this test flight with no FSFX packages installed I get contrails. I also get contrails when I only have precipftx installed. With A320 Immersion installed I will not get any contrails. I'm on Windows 10 and P3D v3.3.5. Anybody have an idea what could be causing this?

Hello, I don't know if this is something that can be done with the A320 immersion package, but it would be great to have the beacon light reflecting on the wing at night. Many thanks, Erik

hi guys,i'm a new member in avsim,and new user of fsfx a320 family immersion.... i'd have this issue from time to time:AN error occurred (WMI) every time i start the FSX....i noticed this would happen when my pc isn't connected to the internet connection!!! do i have to be connected to the internet everytime i wanna use the fsx and in order to get fsfx VFX software working properly??? i'm using win 10 64bit. my system :i5-6500 3.60GHZ 4 CORE motherboard :gigabyte z170x G1,GAMING 5. graphic card: gigabyte gtx 960 . above all the system is smooth and fast with fsx and any heavy challenging add-ons . so plz is there any solution ? best regards . p.s:when i'm conn…

Hello.I have little problem. As you can see reverse trust spray is behind engines and it shouldn't be directly below engines? I saw some videos/images and it's below engine.

Hi, noticed that in icing/snow conditions, the effects are only shown under the front and left wheels. Right wheels don't show any effects. Cheers, Edward