Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Evolution Upgrade

  1. Hi! I believe I have followed every instructions to the letter and more than once, without antivirus on even, but I am unable to get the airbuses to load with FS2Crew installed. I have Vista 64Bit and I am using FSX. In case this matters, I am using dx10 steve's fixer. I have turned off DEP and checked it stayed off, I have turned UAC off ("lever" full down), I have run every installer with admin rights. I have deleted fsx.cfg and let it rebuild a new one, still CTD ("fatal error") after the AC model appears in the display window. I am also starting FS in menu window with a Cessna selected as default and also with 2D panel as default panel. If I restore th…

    • 7 replies
    • 10.6k views
  2. Started by BigRick,

    I was just wondering of the numbers on the loadsheet for the Wilco Airbus Evo series is supposed to be legible? It's on there but it seems that part of the number is missing. Maybe a font issue? What font is used for that info? Thanx! -Rick

    • 2 replies
    • 2k views
  3. This is blowing my mind. I need the A320IAE for my VA and whenever I install the Wilco Airbus Series 1 Deluxe Upgrade, there are no IAE A320's at all, not even the main Wizzair one. So I had an error and FSX would not start. After a couple of days dinkin around with it, I decided to uninstall everything , including FSX , and start with a fresh install. FSX installs ok. Airbus Series 1 Deluxe installs ok, all aircraft are there as advertised. Then I go to install the EVO Deluxe upgrade and it disappears my A320- IAE The CFM A320 is there, but no other A320 or any of the variations that are supposed to be there, including the Wizzair A320 And I'm talking about seeing these…

  4. Started by ajcollins2,

    I have tried all of the Evo Wilco buses and am getting the same in all of them (some are acrew1c.gau) if I try to access FS2Crew from the Virtual Cockpit when the aircraft loads. if I switch to the 2d cockpit first and then revert to the Virtual Cockpit it seems to work?? FSX SP2 Wilco Airbus Evolution FS2Crew Airbus Evolution upgrade any info would be great

    • 1 reply
    • 1.5k views
  5. Started by fencer,

    Hello Brian, I just purchased and installed the Airbus volume 2 (A330/340) WITH evolution for FS9 I already have Volume 1 (A320 etc.) WITHOUT evolution and WITH FS2Crew installed on my PC My questions : 1- I suppose I need to buy the FS2Crew Evolution Upgrade 2- Can I expect Volume 1 (without Evolution) to work OK or should I upgrade Volume 1 to Evolution as well (and update FS2Crew afterward) ? If so, do I need to un-install something first? Sorry if the answer is already shown somewhere but there are so-many sub-forums that I couldn't find it. Thank you in advance and best regards, Bruno

    • 4 replies
    • 1.8k views
  6. Hi, So, i installed Wilco Evolution Airbus 1 & 2. I get in the plane everything look's fine and on the MCP there is this new gauge on the full left side. After that i install again Fs2crew Airbus SE and after i do the upgrade to Evo. And my panel became the old one like i never installed the Wilco Evolution Airbus. (the gauge on the fully left side of the MCP is not there anymore). I did restore my panel CGF through the Fs2Crew start center and i can reload my aircraft cause my FS is crashing. any ideas what is going on? Using: Fs 2004 OS: Windows 7 Thank you for your help!

    • 3 replies
    • 1.8k views
  7. Started by zmesar,

    Wilco airbus evolution (FSX) v.1 causes machine freezes. I've no idea what's the problem, what I'm looking for, this is very frustrating. I tested PMDG B747, PMDG MD11 and B767 (level d simulation) in the same route several times and definitely problem is in Wilco Airbus. I left my aircraft for app. 10 minutes in "spot" form and after that I heard a short noise and I had a freezes screen. I can't shut down or restart FSX (windows) regularly or by task manager, than I have to hold the power button and shut down the machine. Thanks for your help.

  8. Started by andy_rulz_94,

    Hey, I just bought the Wilco Evolution series today and the fs2crew special edition and the fs2crew evolution update. After instillation the A330 booted up fine but when i click to start fs2crew a black box appears in the top left corner and fsx ceases to work. I have disabled the DEP thanks Andrew

    • 1 reply
    • 1.4k views
  9. Started by Sanket Chatterjee,

    I am using Wilco airbus evolution 1..When I take off from the ground I am unable to bank the aircraft. I am currently not using a joystick but I think it is still suppose to turn with keyboard inputs. Also after 2000 or 3000 ft after raising gear and retracting flaps, I try to click the AP1 button but on the ECAM it shows that "auto flight AP off" and sound goes off with red warning light. I cant understand the problem. I cannot engage the autopilot at all. please help....thanks

    • 2 replies
    • 2.4k views
  10. Started by dbrashears,

    Hi Guys: When I installed the upgrade for evolution and the FS2crew Upgrade, something did not go right. On the first use, The Departure Brief Panel comes up totally black and no way to use it. Any Ideas?Don Brashears

  11. Started by TheBladeUk,

    HiI am using evo upgrade on airbus series 1 in virtual cockpit if i minimize to desktop and go back in i hear hear the speaking for e.g the payload sheet nothing appears on screen its a real pain it used to work and has stopped working, i have done reinstall of FSX and both airbus series 1 and FS2crew

    • 1 reply
    • 1.6k views
  12. Started by jhaus,

    When in the left & right passenger's view , what key do u use to return to the cockpit.All the other mini panels have a cross on the corner but not the views.thank you in advance somebody could help meregards Jhaus

    • 0 replies
    • 1.3k views
  13. Started by LeeL,

    Hi BryanI'm trying to buy the evolution upgrade with a pre paid VISA. I get to the pay now screen but when I click pay now it says that PayPal could not validate the card. I'm not even paying with PayPal. I also just used this card at simMarket and it worked, Any ideas? At simMarket I put the name as GIFT RECIPIENT cause thats what it says on the card and i tried that at the fs2crew website and it still didn't work.thanks Lee

    • 2 replies
    • 1.6k views
  14. Started by Jack0913,

    I have been having a problem that the doors are not always closed prior to engine start. Shift E works for the Pax doors but cannot close the cargo and service doors. I must be missing something but it' frustrating going so far and then finding the doors are still open.Using Windows 7 and i5 processor HELP please Jack

    • 3 replies
    • 2.6k views
  15. Hello everyone I have a little problem I bought I bought Airbus Series Evolution FS2Crew Airbus Special Edition Wilco Feelthere after as well FS2Crew: Airbus Evolution Upgrade installs first FS2Crew Airbus Special Edition Feelthere Wilco Airbus after I start Evolution Upgrade fs2crew start center select Feelthere airbus SE I get the following error (FS2CREW FEELTHRE AIRBUS SPECIAL EDITION NOT oN THIS DETCTED FUNSCTIONS TAB WILL bE INOP) I run and the procedure for operating system with the sevn 64 bir (Command Prompt and choose "run As Administrator".Enter The following command (Copy and Paste is recommended to avoid typos): bcdedit.exe / set {current} nx AlwaysOffnd Prom…

    • 1 reply
    • 2.7k views
  16. Hi,can you help me with this issue. I installed Fs2crew for airbus evolution (owning previous version of fs2crew), and my problem is that the installation succeeded in the A333RR, A340CFM and A346RR only, but is not present in any other version. I went into the panel.cfg for those airbus not working, and the fs2crew "window##" lines are not copied in the panel configuration.Is anybody else has this problem? I tried to copy the missing lines from the A333RR to the A332GE panel.cfg but my FS crashes when I try to select the manually modified plane.Please, I need your help!Thanks.Laurent.

  17. Started by julietfox,

    HelloI have installed Wilco Airbus série 1 Delux & Evolution. There is no problemI have installed FS2crew for Airbus + upgrade 2 + Evolution upgrade for Wilco Airbus.When I want to perform the FP on MCDU (like FMGC --> enter LFML/LFPO -->1R), Fs2004 crash and I have a error's message In C/Document.../Microsoft/FS9, two news files are created ? (dxdiag.xml & fs9.cfg.txt)I have uninstalled & re-installed all files Wilco Airbus & FS2Crew.But there is the same problem ??Thanks for your assistance Sorry for my bad english !Jean-François

    • 4 replies
    • 2k views
  18. Started by byork,

    Attention FS2Crew Airbus drivers:I've just released the FS2Crew "Evolution" upgrade!!It makes FS2Crew Airbus Special Edition Compatible with Wilco/feelThere's newly released Airbus "Evolution" series Volume 1 and 2.The Evolution upgrade does not add any new features to the software... what it does is make FS2Crew Airbus Special Edition work with Evolution Volume 1 or 2 (or both).Remember!You must have FS2CREW AIRBUS SPECIAL EDITION INSTALLED PRIOR TO INSTALLING THE EVOLUTION UPGRADE!!!Sorry for yelling, but I know someone will buy the Upgrade without owning FS2Crew Airbus Special Edition :( In fact, I may start a pool on this if anyone of you are interested :( Please c…

    • 0 replies
    • 1.4k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.