December 15, 20187 yr Hello! Let me first say that I love this product! It works great in my Piper Aztec in the VC. However, no matter what I try, I can't get it in the 207. I've read the configuration page and I'm doing everything correctly (I think). Please help me out ASAP! I just bought this plane in FSE and ferrying it down will be a bummer with the default GPS. Spoiler [GNS] ; comma separated list of gauges gauges = GNS_530_1 [GNS_530_1] ; comma separated list of render targets. drawto = WINDOW, Garmin_530_screen, PANELS ; is the master device if true. MasterDevice = true ; connects GPS to copilot side if true. CopilotSide = false ; selects COM/NAV Radios '1' or '2'. RadiosPair = 1 ; uses computer time if true, simulator time otherwise. ComputerTime = false ; integral lighting rheostat index (0 to 3) or percent (-100 to 0) Rheostat.Display = -100 ; integral lighting rheostat index (0 to 3) or percent (-100 to 0) Rheostat.Buttons = -75 ; connects GPS to Autopilot if true. LinkOto = true ; connects GPS to HSI if true. LinkHsi = false ; connects GPS to HSI course motor if true. LinkCrs = true ; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS). LinkObs = true ; connects GPS to VOR if true. LinkVor = true ; connects CDI key to NAV/GPS switch if true. AutoNavGps = true ; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'. AutoNavSource = 0 ; connects GPS to Shadin Air Data computer if true. UseAirData = true ; connects GPS to Shadin Fuel Data computer if true. UseFuelData = true ; connects GPS to RYAN 9900BX if true. UseRyanTcad = true ; sets TCAD sound alerts volume in percent: 0 to 100. RyanTcadVolume = 50 ; sets TCAD maximum number of targets to X-Plane AI Traffic Count. UseTcadAiCount = true ; connects GPS #1 to GPS #2 if true (both required). UseCrossFill = false ; enable device failures if true. UseFailures = false ; uses Simulator GPS commands if true. UseSimGpsCmds = true ; updates Simulator GPS flight plan if true. LinkSimGps = false ; saves the active route as a Simulator flight plan if true. AutoSavePln = false ; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF PowerKnob = NONE ; sets device power source: ; ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY,BUS_1,BUS_2,BUS_3,BUS_4,BUS_5,BUS_6 PowerSource = MAIN_BATTERY ; sets fuel type: AVGAS,JETA,JETB FuelType = AVGAS ; sets TAWS type: TERR,TAWS TawsMode = TERR ; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY TawsSurface = HARD_SOFT ; TAWS minimum runway length (feet) TawsMinLength = 240 ; HSI lateral deviation scale factor. CdiScale = 1 ; HSI vertical deviation scale factor. GsiScale = 1 ; sets master sound volume in percent: 0 to 100. MasterVolume = 100 ; mute sound when simulator window looses focus if false. NoAudioFocus = false ; sets trainer process CPU: 1 to 32 (0: last core, -1: automatic). CpuAffinity = -1 ; cdi/obs: CDI Key AFMS.cdi_key = ; cdi/obs: Selected Course for GPS AFMS.sel_crs_gps = ; cdi/obs: Selected Course for VLOC AFMS.sel_crs_vloc = ; cdi/obs: V-Flag State (1: declutter AFMS.v_flag_declutter = ; main: GPS Selected (0: prompt, 1: auto) AFMS.gps_selected = 1 ; main: COM Presets AFMS.com_presets = ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 [GNS_530_1.Garmin_530_screen] ; display window if true. visible = true ; show screen only gauge if true. nobezel = true ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = PANEL3D ; display position and dimension (left,top,width,height) frame.rect = 1252,587,520,390 ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; enable mouse clickspots if true, disable if false (use SHIFT to override) usemouse = true ; left mouse button on the screen toggles popup window if true. popleft = true ; right mouse button on the screen toggles popup window if true (requires XP11.1). popright = false [GNS_530_1.WINDOW] ; display window if true. visible = false ; show screen only gauge if true. nobezel = false ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = WINDOW ; display position and dimension (left,top,width,height) frame.rect = 1252,587,520,390 ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; enable mouse clickspots if true, disable if false (use SHIFT to override) usemouse = true ; left mouse button on the screen toggles popup window if true. popleft = false ; right mouse button on the screen toggles popup window if true (requires XP11.1). popright = false ; VR mode position and dimension (left,top,width,height) (requires XP11.20) vrmode.rect = 0,357,490,357 ; display as popout window if true (requires XP11.1). undocked = false ; display mouse tooltips if true. tooltips = false ; freeze display position if true. locked = false [GNS_530_1.PANELS] ; display window if true. visible = false ; show screen only gauge if true. nobezel = true ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = PANELS ; display position and dimension (left,top,width,height) frame.rect = 1252,587,520,390 ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; enable mouse clickspots if true, disable if false (use SHIFT to override) usemouse = true ; left mouse button on the screen toggles popup window if true. popleft = true ; right mouse button on the screen toggles popup window if true (requires XP11.1). popright = false
December 15, 20187 yr Author Hi, can anyone help me out here? Despite an hour of tweaking and following instructions, I can't get my GPS to fit correctly. Any advice? Spoiler [GNS] ; comma separated list of gauges gauges = GNS_530_1 [GNS_530_1] ; comma separated list of render targets. drawto = WINDOW, Garmin_530_screen, PANELS ; is the master device if true. MasterDevice = true ; connects GPS to copilot side if true. CopilotSide = false ; selects COM/NAV Radios '1' or '2'. RadiosPair = 1 ; uses computer time if true, simulator time otherwise. ComputerTime = false ; integral lighting rheostat index (0 to 3) or percent (-100 to 0) Rheostat.Display = -100 ; integral lighting rheostat index (0 to 3) or percent (-100 to 0) Rheostat.Buttons = -75 ; connects GPS to Autopilot if true. LinkOto = true ; connects GPS to HSI if true. LinkHsi = false ; connects GPS to HSI course motor if true. LinkCrs = true ; connects GPS to OBS input if true (LinkHsi/OBS or AutoNavSource/OBS). LinkObs = true ; connects GPS to VOR if true. LinkVor = true ; connects CDI key to NAV/GPS switch if true. AutoNavGps = true ; selects VLOC NAV '1' or '2'. '0' selects same source as 'RadiosPair'. AutoNavSource = 0 ; connects GPS to Shadin Air Data computer if true. UseAirData = true ; connects GPS to Shadin Fuel Data computer if true. UseFuelData = true ; connects GPS to RYAN 9900BX if true. UseRyanTcad = true ; sets TCAD sound alerts volume in percent: 0 to 100. RyanTcadVolume = 50 ; sets TCAD maximum number of targets to X-Plane AI Traffic Count. UseTcadAiCount = true ; connects GPS #1 to GPS #2 if true (both required). UseCrossFill = false ; enable device failures if true. UseFailures = false ; uses Simulator GPS commands if true. UseSimGpsCmds = true ; updates Simulator GPS flight plan if true. LinkSimGps = false ; saves the active route as a Simulator flight plan if true. AutoSavePln = false ; sets device power knob switch mode: NONE,DEFAULT_ON,DEFAULT_OFF PowerKnob = NONE ; sets device power source: ; ALWAYS_ON,AVIONICS_BUS,MAIN_BATTERY,BUS_1,BUS_2,BUS_3,BUS_4,BUS_5,BUS_6 PowerSource = MAIN_BATTERY ; sets fuel type: AVGAS,JETA,JETB FuelType = AVGAS ; sets TAWS type: TERR,TAWS TawsMode = TERR ; sets TAWS surface: HARD,HARD_SOFT,WATER,ANY TawsSurface = HARD_SOFT ; TAWS minimum runway length (feet) TawsMinLength = 240 ; HSI lateral deviation scale factor. CdiScale = 1 ; HSI vertical deviation scale factor. GsiScale = 1 ; sets master sound volume in percent: 0 to 100. MasterVolume = 100 ; mute sound when simulator window looses focus if false. NoAudioFocus = false ; sets trainer process CPU: 1 to 32 (0: last core, -1: automatic). CpuAffinity = -1 ; cdi/obs: CDI Key AFMS.cdi_key = ; cdi/obs: Selected Course for GPS AFMS.sel_crs_gps = ; cdi/obs: Selected Course for VLOC AFMS.sel_crs_vloc = ; cdi/obs: V-Flag State (1: declutter AFMS.v_flag_declutter = ; main: GPS Selected (0: prompt, 1: auto) AFMS.gps_selected = 1 ; main: COM Presets AFMS.com_presets = ; connects to: 'PFC_STACK','PFC_430','PFC_530' or any '#PID' (#D002 for PFC_430) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selector number or -1 to disable. HardwareIdx = -1 [GNS_530_1.Garmin_530_screen] ; display window if true. visible = true ; show screen only gauge if true. nobezel = true ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = PANEL3D ; display position and dimension (left,top,width,height) frame.rect = 1252,587,520,390 ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; enable mouse clickspots if true, disable if false (use SHIFT to override) usemouse = true ; left mouse button on the screen toggles popup window if true. popleft = true ; right mouse button on the screen toggles popup window if true (requires XP11.1). popright = false [GNS_530_1.WINDOW] ; display window if true. visible = false ; show screen only gauge if true. nobezel = false ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = WINDOW ; display position and dimension (left,top,width,height) frame.rect = 1252,587,520,390 ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; enable mouse clickspots if true, disable if false (use SHIFT to override) usemouse = true ; left mouse button on the screen toggles popup window if true. popleft = false ; right mouse button on the screen toggles popup window if true (requires XP11.1). popright = false ; VR mode position and dimension (left,top,width,height) (requires XP11.20) vrmode.rect = 0,357,490,357 ; display as popout window if true (requires XP11.1). undocked = false ; display mouse tooltips if true. tooltips = false ; freeze display position if true. locked = false [GNS_530_1.PANELS] ; display window if true. visible = true ; show screen only gauge if true. nobezel = true ; display type: WINDOW,PANEL2D,PANEL3D,PANELS frame.type = PANELS ; display position and dimension (left,top,width,height) frame.rect = 1252,587,520,390 ; screen only border size (pixels). border.size = 0 ; screen only border color (#RGB or #RGBA). border.rgba = #000000 ; enable mouse clickspots if true, disable if false (use SHIFT to override) usemouse = true ; left mouse button on the screen toggles popup window if true. popleft = true ; right mouse button on the screen toggles popup window if true (requires XP11.1). popright = false
December 15, 20187 yr Author Nevermind, I found out the settings, I'll be sharing it with the config thread soon! Disregard! https://prnt.sc/lvhfe4 Either I can't get it to fit on the screen without clipping or it doesn't fill the whole thing. The default GPS however in this specific plane clips a little as well. Edited December 16, 20187 yr by Wordpress
December 16, 20187 yr Author I'm sorry for posting over and over again, but I've finally got it! If you try hard enough you can find a clickspot for the default, but it fills the screen correctly now! I found out it's a problem with the 207 GPS having weird dimensions. I made it though!
Archived
This topic is now archived and is closed to further replies.