* Allow minimizing to the windows system tray.
* Added XPlane-12 Toliss A321 support.(Beta Feature)
* Added support for Fenix a321 econ flow control.
* Fixed fenix a320 COM inputer accuracy issue.

They are now available for updates on the App Store, flightsim.to and simmarket.com .
Wish you all have a nice weekend.

SimFly Pad B777 Premium Panel is an advanced feature of the SimFly Pad mobile application. This panel allows you to directly control various buttons and switches in the MSFS game through SimFly Pad. At the same time, it enables real-time transmission and display of screen images from the B777 (such as PFD, ND) to the device running SimFly Pad.

Key Features:

• Supports direct control of the aircraft’s MCP panel, OVHD panel, CDU, and other panels, with all data fully synchronized bidirectionally with the simulator.
• Over 90% of the SOP can be completed on this panel.
• Compatible with MSFS PMDG B777.
• Supports streaming PFD, ND, EICAS, and EFB image data to SimFly Pad. (Requires popping out windows in the game)
• Both Lower EICAS and EFB support touch control directly on the SimFly Pad.
   

About SimFly Pad Cockpit Controls

The Cockpit Controls feature of SimFly Pad allows you to directly control various buttons in the game’s aircraft via your mobile device over a wireless LAN. Depending on your network conditions, the typical latency can reach around 10ms. Additionally, this feature has minimal impact on the simulation performance, helping you enhance your flight simulation experience without the need for additional hardware peripherals.
 
Key Features:

• Extremely Simple Connection: No additional file operations are needed.
• Ultra-fast Response Time: Typically below 20ms.
• Minimal FPS Impact: Operates with logic similar to physical keys.
• Wireless Data Transmission: No additional wired connections are needed.
• Native iOS Implementation: The app (SimFly Pad) connects directly (no QR code scanning or browser required).

Please note that the SimFly Pad B777 panel is far away from completion. But due to the demands from users, I decide to released an dev version of the SimFly Pad B777 panel. This panel allows you to control the B777 FMC directly. Also, It provide the abiliity to stream the screens of PFD, ND and EICASs.

You are welcome to download the latest version 3.7.0 of SimFlly Pad from the AppStore.

Notes:

• This plugin requires SimFlyLinker version 3.6.6 or higher, which you can download for free from flightsim.to.
• This profile is only compatible with the StreamDeck Plus version.

Usage:

• 1. Download and extract this plugin, then install:
  • Double-click com.seeingsky.simflylinker.streamDeckPlugin
  • SimFlyLinker_A320.streamDeckProfile
• 2. Download SimFly Linker, run it, go to the Cockpit Controls page, and click to install the Core plugin.
• 3. In the SimFly Linker settings page, check the StreamDeck API.
• 4. (Optional) Depending on your aircraft type, go to the SimFly Linker Cockpit Controls page and select either the FBW A320 Profile or the Fenix a320 Profile.
• 5. Start the game, load the A320 aircraft, and click the Start button on the SimFlyLinker homepage to begin.

Features:

• Operation and display of SPD, HDG, ALT, and VS on the FCU panel.
• Adjust values using the knob
• Short press for Push, long press for Pull
• Tap the screen to switch the corresponding display units
• Various buttons on the FCU panel.
• Operation and display of EFIS BARO on the CAP side, and operation of ND MODE and ND RANGE knobs.

Other

• If your StreamDeck is connected to another computer on the local network, you can connect by modifying the Global->SimFlyLinkerIP in the button properties.
• Do not modify other KEYS in the button properties.

• Made minor redesigns to the B737 panel.

Key Features:

• Support tap/drag gesture control.
• Extremely low latency.
• Support streaming 2 screens at the same time.

To download the latest version of SimFly Pad iOS, go to AppStore

The SimFly Pad requires the SimFly Linker running on your PC, you can download it from the flightsim.to

• Added B737 Preimum Panel.

• Added support for changing the landing lights configuration on the B737 panel.
• Improved the COM/NAV frequency input on the B737 panel.
• Fixed the incorrect cabin altitude climb speed for the B737 panel.

SimFly Linker v3.6.3 Release Notes:

• Fixed a crash that occurred when a popup window was minimized.

• SimFlyPad Android v1.0.2 Release Notes:
• Improved the A320 FCU rotation speed.
• Improved feedback sound for the feature of cockpit controls.
• Added a workaround button to "fix" the A320 EFB touch position problem.
• Fixed the A320 radar panel TILT selector bug.
• Improved the 'Camera' page layout for tablet devices.

You can now head to the Google Play Store, search for SimFly Pad, and download it to experience the new features.

For more information, you can watch the YouTube video linked below.

● Added the A320 WX Radio Panel.
● Added the A320 Radio Volume Panel.

They are now available for update on the App Store, flightsim.to and simmarket.com .
Wish you all have a nice weekend.

● Added A320 OVHD Calls Buttons. (required SimFly Linker 3.5.12 version)
● Improved the stability of the checklist voice interaction feature.
● Increased the maximum zoom level for the cockpit page from 1.5 to 2.5.

They are now available for update on the App Store, flightsim.to and simmarket.com .
Wish you all have a nice day.

● Added FO MCDU & FO EFIS to the A320 Panel.
● Added ATTEND & GND CALL BUTTON to B737 Panel.
● Fixed Fenix A320 RMP Swap button bug.
● Added support for accessing SimFly Linker though a VPN network.

They are now available for update on the App Store and flightsim.to (the update on SimMarket is still pending review and is expected to be completed within the next few hours).

Have a safe flight.

You are welcome to update your version on simMarket and flightsim.to  

Have a nice flight.

● Added MCDU Data Mode Support to the Fenix A320. (no need to pop up the MCDU Window anymore)
● Added Web Version of Fenix A320 MCDU Support.
● Added RUDDER TRIM to the A320 Panel.
● Added RMP1/2 to the A320 Panel.
● Added EFB Support to the B737 Panel.

You can go to the AppStore to update the SimFly Pad. For SimFlyLinker, you can update it on flightsim.to. If you purchased it on simmarket, you can also update SimFlyLinker on simmarket. 

Hello everyone, SimFly Pad and SimFly Linker 3.5.8 have been released. The main updates in this version include:

• Optimized startup speed (no more 2-second pause after clicking Start)
• Added ALT/SPD INTV buttons to the B737 panel
• Added a FO FD switch and a CRS selector to the B737 panel.

You are welcome to update your version on the AppStore and flightsim.to.

Updated At：2024-2-1

Some users of the SimFly Pad experience network connection issues on their first use, encountering problems connecting to SimFly Linker. Generally, the following steps can help troubleshoot the issue:

• Test basic network connectivity.
• Check firewall settings.

Here are the detailed troubleshooting steps.

Testing Basic Network Connectivity

A fundamental requirement is the network connectivity; your SimFly Pad device must be able to access your PC for SimFly Pad to function properly.

Testing Method One:

• Open the Connection Settings page on SimFly Pad (iOS) and click on Diagnose. If you are using the "automatic" mode, SimFly Pad will try to automatically obtain the IP address of the PC where SimFly Linker is located. If it fails, try manually entering the IP address at the top of the page and re-click Diagnose.
• During the test, if the Ping test shows green, it indicates success. If it shows red, it indicates a failure; please refer to the troubleshooting guide on the page for solutions.

Testing Method Two：

• You can test the connection between your mobile device and a specific IP address using third-party tools. For example, you can download a tool called iNetTools from the App Store and use its Ping test feature to test the connectivity between your mobile device and the PC.

Troubleshooting Guide：

• Ensure your mobile device and PC are connected to the same network.
• Confirm that your router does not have options like WIFI isolation or device isolation enabled.
• Try using the ADMIN button in the Connection Diagnose page of SimFly Linker to add an "Allow Local Network Rule."

Windows Firewall Settings

If you can Ping successfully in the Connection Settings Diagnose test on SimFly Pad, but fail in the "test send request" step, it's likely that your Windows firewall is blocking the connection.

Testing Method One：

• After clicking "Start" on SimFly Linker, open a browser (like Safari) on your SimFly Pad mobile device and enter http://xxx.xxx.xxx.xxx:39000/test (replace xxx.xxx.xxx.xxx with your SimFly Linker's IP address). If you see a screen like the one below, it generally means all your configurations are correct, and SimFly Pad should work properly.

Testing Method Two：

• After clicking "Start" in SimFly Linker, you can go to the Connection Settings page on your SimFly Pad mobile device and click the Diagnose button. If it shows that everything is normal, as in the image below, then it means there is no issue with your firewall settings.

Troubleshooting Guide

• Open the Connection Diagnose page in SimFly Linker, click Start, and then check the diagnostic results to identify potential problems.
• After identifying the issue, you can use the ADMIN Action button on the same page to add a "SimFly Linker Rule" to set the firewall rule in one click.
• Check any running VPN software and try to disable them (for example, ExpressVPN can isolate your device).
• Ensure your SimFly Pad has Local Network Permission. (You can check this permission in the system settings)

If the above methods still do not resolve the issue, please feel free to contact us:

Email: ethantoken@gmail.com

Discord: https://discord.gg/cU3U6gtX7x

Specific changes: 
● Added a free panel for the TBM930, supporting control of G3000 MFD/PFD/TOUCHPAD. 
● Expanded the original G1000 panel to G1000/G3000.
● Added support for B787 PFD screen streaming.
● Added a full-screen mode for the Cockpit Controls page. 
● Added firewall rule detection for SimFly Linker. 
● Other bug fixes.

Screenshots

Specific changes:

● Added a free SR22 panel. It supports the control of G1000 MFD/PFD/CTRLPAD.

● Optimized streaming performance for pop-up windows during network fluctuations.

(note: The Android version supporting Cockpit Controls is still under development.)

Hi all. Happy new year~ 

The SimFly Pad 3.5.0 has been released (along with SimFlyLinker version 3.5.0), you can go to the AppStore to update it.

• Most functions of the top panel have been completed
  • Added (almost) all the missing components in the previous version.
• Optimized the display speed of the CDU.
• Added the display of BRAKE PRESS.
• Added the display and control of STAB TRIM.
• Redesigned the color scheme of the UI.
• ....

You can watch the YouTube video below for a quick overview.

Now it is in the final stages of testing and I expect to release it before the arrival of 2024.

Hope you will like it~ 😉

The SimFlyPad & SimFlyLinker 3.4.1 are both available on the App Store and flightsim.to. These updates include:

SimFlyPad 3.4.1:

• Improved the UI performance for the C250 Preimum Panel.
• Fixed the default position error for the B737 Premium Panel.
• Added 'Push' support for the A320 EFIS Baro Knob.
• Fixed the bug where Manual IP Mode would not take effect until the next startup.
• Minor panel UI updates.

SimFly Linker 3.4.1:

• Now you can specify a program for the A320. When SimFlyLinker detects that the A320 is selected, it will try to start this program automatically.

Key updates include:

• Addition of the PA24/Comanche 250 advanced panel. 
• Official release of the B787 panel. 
• Improved video connection speed in pop-up windows.
• Addition of a one-click NAV1 to NAV2 sync feature in the B737 panel.
• Adjustment of button font and size in MCDU/CDU.
• Fixed scrolling lock button issue on iOS 17.
• Fixed an issue with the General panel.
• Resolved the issue of streaming windows not transmitting in manual IP mode.
• Stability enhancements.

If you have any questions or feedback, please feel free to share.

I have a problem with your software "SIMFLYPAD A320 PREMIUM PANEL MSFS" or with the connection between PC and tablet.
I bought your software through Simmarket.

First I installed the “SimFly Linker” program on the PC and installed the two plugins (FDR and Core). They can also be found in the MSFS Community. The WASM module is also installed in this folder.
The "FenixQuartz" is also installed on my PC and the directory is specified in the "SimFly Linker".
My WiFi connection is set to the private network and everything is displayed with green dots in the “SimFly Linker”.
I downloaded and installed the APP (Android) “simfly pad” from Google Playstore on my tablet.
I created an account in the app and entered the name for the Simbrief. The tablet is active over the same network.

My goal was to use this software for the FENIX.

Now my questions or problems.

1. Does your software work on Android tablets? Or is this only intended for iOS.
2. Unfortunately I can't see MCDU like in your movie or the overhead and stuff like that. How can I get this on the tablet? I only have 4 buttons in the app, such as Settings, Records, Camera and Checklists. In your PDF instructions I can't figure out how to do this on an Android tablet.

Thank you for an answer.
Greetings Rene from Germany.

This entire text was translated into English by a translation program because unfortunately I am not very good with the English language.

I am delighted to announce that the SimFly Pad B787 panel has been officially released. You can now experience it by updating the SimFlyPad iOS version to 3.3.0. You can watch a demonstration of the SimFly Pad B787 panel in the video below.

Key features:
● Support for remote control of MFD! Yes, you can now use the touch function on SimFlyPad to operate the MFD.
● Support for all MCP functions.
● Support for operating most of the operable buttons on the MSFS B787 overhead panel. (Many of the buttons are not usable in MSFS's 787 itself)
● Support for Asobo B787-10 & Horizon B787-9.

Usage Restrictions:
● Due to a technical level issue involving a bug fixed only in the SU14 version, users who want to use this panel need to upgrade their MSFS version to SU14 BETA, or restart the game after opening the DEV mode.

If you have any suggestions, please feel free to leave a comment and feedback.