Allan Burek

Help please.

Anyone had any similar issues? P3D was constantly crashing before even the startup screen after the update to v5.4...after a lot of head scratching remembered something similar on other P3D versions. Renamed the .dll and it starts up fine.

Does it need an update or just happening on my system? Ideas?

Thanks and rgds,

T

This is my first post here so tell me if this is not the right place.

I have been using RAASPRO (locked) with Aerosoft Airbus A320/A321, for FSX for quite some time without any issues and it is a great addon, however I have had a weird problem last night.

While doing departures from OPKC, RAASPRO gives the audio call out for runway 25L correctly ('approaching 25L' and 'on runway 25L') however when I fly to OPKC from anywhere it never gives the aural warning of 'approaching 25L'.

I have checked the runways.csv file and the runway is there (while departing it works) and I tried making the database again but it does not work still. I have flown to numerous other airports and it has always worked. I have flown the approach profile of 25L a dozen times, correctly, but still it does not give any call out.

It always works fine for 25R on OPKC but not on 25L while approaching.

I am a P3Dv5.3 user and I have a problem with RAAS in 777 of PMDG. Approaching runway I don't hear any RAAS announcement.

My first move was to cut-paste RAASPRO folder from P3D main folder to User\user\Documents, in order to make P3D enable RAAS. Despite that, it still produces

no announcement.

On the other hand, PMDG support state unable to help.

A valid add-on.xml exists, dll.xml has a RAAS entry, RAAS is activated through PMDG setup, but still no success.

Can anybody help ?

Running win10 with latest updates.

Sotiris.

I'm experiencing a Bug on the QW 787: When I add the Plane to a RAAS Profile, the Plane (when loaded in a new Session) will Start with the Indication Lights Test Switch to on in the ColdAndDark Panel State. So everything is being lit up.

As soon as I remove the created Profile INI File (in %appdata%), the Plane loads normally (really completely dark).

Any help please?

Regrds

John Earl

It only occurs when RAASPRO is activated with xml in Simstarter. Without RAASPRO started 

no error occurs. 

Has anybody an idea how to resolve this problem?

Kind regards,

Fred

All the other addons are back except for RAAS Pro. I reinstalled RAAS Pro few times but it is not showing in the add-ons cfg file.

It's not in P3D Add-on menu tab either.

Is there something else I have to install for RAAS Pro to work? I don't remember anymore since the initial installed work flawlessly.

Thanks!

3. If you're doing a brand new install in FSX: Steam, then you will need run MakeRunways inside of the FSX: Steam folder.

CHANGE LOG:

VERSION 3.3

1-New config options have been added that give user's greater control over the "Altimeter Setting" warning callouts.  A problem could occur where users would manually set their altimeters based on a 3rd party METAR setting, and not on the actual pressure at the aircraft.  This could trigger an "Altimeter Warning" callout due to the difference in altimeter settings.  The new options add a tolerance level setting to help you avoid this scenario due to the possible different altimeter setting values.

Moreover, we recommend that all FS Labs Airbus users disable the "Altimeter Setting (Above and Below Transition)" warning callout because RAAS cannot read the Altimeter in the FSLabs aircraft directly.

VERSION 3.0

1-RAAS now supports P3D Version 5!  The P3D V5 option will appear in the installer options (P3D 64 bit version of RAAS only!)

VERSION 2.9.92.162

1-Fixes issue with saving Master Switch (Aircraft must use a Saved Profile for this to work.

2-Fixes with issue with TA/TL callout.

3-Adds additional runway reading support for FS Labs Airbus version of FS2Crew.

VERSION 2.6.14.3

1-Fixes issue associated with saving the Master Volume slider.

VERSION 2.6.10.2

1-Locked version support for the Aerosoft CRJ and PMDG 747 V2.

VERSION 2.4.0.7

1-New feature added.  The RAAS Master Switch can now be controlled via a keypress or joystick button connected to the WATER RUDDER (UP/DOWN) command.

This feature was based on requests from home cockpit users who wanted to be able to control the RAAS Master switch via their hardware rather than the main RAAS menu.

For this function to work, there is a new option on the RAAS menu.  ENABLE KEY EVENT API must be ticked.

VERSION 2.3.1.7

1- Fixes issue with the FSX Steam version of RAAS not being able to connect to the Flight Simulator under certain circumstances.

VERSION 2.0.2.3

1- Fixes potential issue associated with the Steam version of FSX and Simconnect.

VERSION 1.6.0.2

1- Fixes P3D 2.4 crash

2- Adds new option to route RAAS audio to any audio device on your system (this is great for Home Cockpit builders).

VERSION 1.3.2.60

1- Installer supports P3D Version 2+

2- Unlocked version supports the new Aerosoft Airbus X Models (A318 and A319)

3- New option to disable the automatic internet version check.  (In some rare cases, we believe this update check may have been a factor in causing RAAS not to load under select circumstances, especially with PMDG 777 users.)

VERSION 1.2.1.36.

1- SDK RELEASED.  The RAAS SDK allows third party developer to integrate RAAS directly into their aircraft.  Important:  This document is for experienced flight simulator programmers only.  If you are a commercial 3rd party aircraft developer, and you wish to license RAAS, please PM me.

2- RAAS code updated to function with SDK.

3- Fixed an issue where RAAS could make improper calls on complex, multiple runway airports such as SFO.

VERSION 1.1.0.30

1- Fixed an issue whereby the excessive approach speed call was incorrectly using ground speed, not indicated air speed.
2- Updated the logic so that an 'unstable' call will not play during approach unless a previous warning (like 'flaps', 'excessive speed' or 'approach angle' ) was played first.
3- Removed the Scenery.CFG check as it caused hangs for some users. Users must remember to run 'Make Runways' anything they update their scenery.
4- Updated the installer so that RAAS Professional users cannot accidently installed the 'locked' version of RAAS that ships with the Airbus Extended X.
5- Updated the uninstaller so as to preserve users' other 3rd party DLL.XML entries created after RAAS was installed.
6- 'On Runway' call will no longer play if unchecked.


VERSION 1.1.0.22

1- Fixed an issue preventing the Master Switch from being saved properly.


VERSION 1.1.0.20

1- Fixed a potential issue that would prevent users from being able to input minimum flap settings with select aircraft.


SERVICE UPDATE 1:

1- To some users RAASPRO.DLL couldnt be loaded by FS9, the reason is that a single line of code was causing RAASPRO.DLL to ALWAYS depend on SIMCONNECT.DLL even if it's a FS9 ONLY installation or FSX/P3D. So if you have FS9/FSX installed in a single machine, with previous versions there were NO problems due to the fact that SIMCONNECT.DLL was always present, but on FS9 ONLY machines, SIMCONNECT.DLL is missing and RAASPRO.DLL could not find that DLL, as a result FS9 will ALWAYS say: "flight Simulator couldn't load aircraft or software...".

2- When NO LINKED/ASSOCIATED profile is found for the CURRENT aircraft, RAASPRO will be AUTOMATICALLY *TURN OFF*, otherwise if an ASSOCIATED/LINKED profile is found RAASPRO will be AUTOMATICALLY *TURN ON*. This fixes the issue of having any other plane like a cessana NOT associated with ANY profile and RAASPRO ON.

3- Fixes EDDF RUNWAY 18 issue, the fact that RUNWAY 18 has a SINGLE RUNWAY DESIGNATOR, as there is NO RUNWAY 36, that caused RAASPRO to NOT recognizing that runway, NOW RAASPRO detects runways having a SINGLE runway designator and CREATES (virtually) a FAKE runway ID, which for RUNWAY 18 would be RUNWAY 36. This would happen with EVERY RUNWAY having a SINGLE designator, so NO NEED TO CHANGE/MODIFY R4.CSV database file.

4- Fixes Altimeter Call associated with the Transition Altitude.

5- Other small fixes.



Best,

"Flight Simulator has detected a problem with a third-party software program (add-on):

Name: RAAS Professional

Version: 2.6.14.3

Company: FS2Crew

File: .\RAASPRO\RAASPRO.dll

Do you want to run this software (not recommended)? "

Thank you,

my RAAS Prof. unlocked gives the guidance partly in German (e.g. Runway „numbers“). How to make sure, it only speaks English?

specs:

prepar3d v5.2 HF1 on Windows 10 (German Edition).

thanks a lot

Xris

Here is the dll.xml file.

<?xml version="1.0" encoding="Windows-1252"?>

<SimBase.Document Type="Launch" version="1,0">
  <Descr>Launch</Descr>
  <Filename>dll.xml</Filename>
  <Disabled>False</Disabled>
  <Launch.ManualLoad>False</Launch.ManualLoad>
  <Launch.Addon>
    <Name>PMDG_Interface</Name>
    <Disabled>False</Disabled>
    <Path>PMDG\DLLs\PMDG_Interface.dll</Path>
    <DllStartName>module_init</DllStartName>
    <DllStopName>module_deinit</DllStopName>
  </Launch.Addon>
  <Launch.Addon>
    <Name>RAASPRO</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>.\RAASPRO\RAASPRO.dll</Path>
    <DllStartName>module_init</DllStartName>
    <DllStopName>module_deinit</DllStopName>
  </Launch.Addon>
</SimBase.Document>

I recently uninstalled MS Office and Skype, and all MS apps, Microsoft Office 365, and I installed Microsoft Access Database Engine 2016(x64 bit) from Microsoft, manually. But still RAASPRO causes P3D to run as a background process! It is frustrating, and I cannot continue with my flights!

Well it is the RAASPRO (UNLOCKED) 64bit version!

DebadritoRaj Chakrabarti

has the PMDG  T7's (locked) RAAS version.  
   When I tried to start my FSX this afternoon, I received the same error
message during FSX startup.  Any idea what is causing this?  Screen cap of the

error msg is at the below Dropbox link:

  https://www.dropbox.com/s/xw1sxbvix51yw5h/MG_152.jpg?dl=0
   I believe the error message began after an update to the PMDG Ops Center
was unstalled.  And I believe that I went through this at least once before after
a previous PMDG Ops Center update  
  I contacted PMDG first about this and their support rep Chri Makris suggested
that I contact FS2 Crew. Please tell me how to troubleshoot this or perhaps
you can suggest a fix.  I have tried the three fix techniques offered by FS2 Crew

with no success.
Best to all,
Ken Boardman

What could it be?

Michael 

I did my new installation following this order:

1. Update of Windows 10 64 bit
2. New download of all (simulator, scenery add-on, aircraft and FS2crew product, IVAO ad FSUIPC). Making that, I was sure that my product were all new and up - to - date
3. Proceeding with a new installation of P3d and it worked fine
4. Proceeding with a new installation of all aircraft (PMDG, Quality wings, Aerosoft, FSLab and Carenado). After every installation I checked if P3d worked fine. It did it.
5. Proceeding with a new installation of all add-on scenery. After every installation I checked if P3d worked fine. It did it.
6. Proceeding with a new installation of all FS2crew product (PMDG, Quality wings, Aerosoft and FSLab). After every installation I checked if P3d worked fine. It did it.
7. Proceeding with a new installation of UGCX, once again the simulator worked fine.
8. The last installation was RAAS pro 64 bit. Setup was in order, I installed Make runways in P3d main folder, I ran it as an Administrator and all worked fine, but now I had the same problem of ten days ago, my simulator starts, builds new scenery database and then crashes!

If I uninstall RAAS pro and if I delete the following folders: C:\Users\kiosu\AppData\Local\Lockheed Martin\Prepar3D v5, C:\Users\kiosu\AppData\Roaming\Lockheed Martin\Prepar3D v5 and C:\ProgramData\Lockheed Martin\Prepar3D v5 the simulator works fine. I don't have any new idea and now I need help. What can I do to solve this problem?

Thank in advance.

Davide

Just a note that if you have the problem like I was having, whereby after installing the TFDi 717 your P3D would hang on loading after pressing the OK button when starting a scenario, this issue can be resolved by removing RAAS, either by uninstalling or temporarily disabling in the DLL.xml

I spent a number of hours troubleshooting until I came across a solution in the TFDi Discord. Hope this helps!

Morgan

i also installed the fs2crew pmdf 777-lr

i have windows 10 now  i had windows 7 and it was working great

any help is appreciated

ken hanson

cyyc

I tried updating it to your latest version, but still same issue.

I contacted PMDG, and they told me that it might be something tha FS2Crew can help me out with?  Telling me to contact Brian York?  They said that its something happening to some users of P3DV4

Hope you can help me.  Thank you!!!.

Does Raas professionnal work with the qw787 + fs2crew?
 

it seems that when i activitate the master switch on for raas and restant the SIM it destroys my cold and dark state .

thxs for help

Best regards

alexandre

Can you explain the correct way to create and link a profile to a specific aircraft please?

I have the locked version v3.0.0.0 installed  in P3Dv5 HF2 and RAAS is working without issues.

Except when I look at the RAAS settings its labelled "B747" at the top.

I have created a profile and save it for the Áirbus and even if I link it and set it as default, whenever I select the Aerosoft Airbus  in P3D, the RAAS profile that is by default loaded is the B747.

I have tried unlinkingng the B747 profile but still no luck. I am sure I am not doing something right.

Any thoughts? 

I have the PMDG 747 and 777 installed and just downloaded the 3.3 locked version update for P5D. However after installing the update and lading the SIM, I still see version 3.0.0 in the about section. And for some reason, there is a new entry in my Start Menu saying "01 Uninstall RAAS Professional Unlocked". Which is not what I just installed. Did I miss a step? How can I check for a proper 3.3 installed veriosn?

Cheers...