I have an issue with Immersion in P3Dv5.  I did a complete reinstall of the SIM and I am getting this issue with the "Shaders" according to LORBY.

I noticed that during climb and cruise I get engine condensation at FL300, which alone is quite unusual. But beyond that, I get it only on engines 2,3. If the air is humid enough the pressure should be equal in all engines, and thus condensation should create either in all or to none. Right?

Here is a screenshot:

I bought and installed immersion package for PMDG 747. All seems to be inslaled well. Independent immersion manager works, however, effects (lights and others) are not activated. Green buttons on left side of immersion manager window stay inactivated. Only what I can do is to activate it blue - preview - then it works. However, once I return back to sim it is again unactivated...I cannot make it working…..

Any idea what can be wrong ?

many thanks !

JM

I use the 747 Immersion under P3Dv5 HF2 and i dont like the Style from the Contrails . 

The Contrails looks like small round clouds . Like Balls . But in real it is one line . 

I try already the different Settings in Immersion Manager . But without success . 

Here an original Picture : 


And here an Screenshot from Sim : 

Is there any Solution for this ? 

Thanks

Michael 

Run as administrator I also turn off windows defender disabled PTA installed the simulator from scratch but nothing to do I don't get out of it also tried with windows firewall...

I've transferred from the normal installation to the Orbx based install.  Immersion manager fails to start and I get the following error reported in the log;

"Could not load file or assembly 'Framework, Version=1.1.43.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified."

Any thoughts?

After transfering all of mine oldprop stuf to ftx central, fixing chaseplane, now I have an issue with the 747 immersion manager. It loads, then crashes with a messsage that an error log is on my desktop (no log unfortunately), following with a message do i want to restart it, and afterwards the manager won't start, and there are no effects on the 747 also. Any help would be greatly appriciated

Thank you,

ivan

I ahve pruchased now the 747 add on. Installed it a couple of times but I havent seen any effects. Opened the Sim as Admin as requested. Didnt work. I have unistalled the whole VFX Central and my pevious purchased 737 and 777.

Re-Installed everything... 737 and 777 works bt nothing on the 747. it seems that Immersion Manager connects to the sim but nothing happens.

Please help... or maybe there is another similiar topic openend alreay.

Thanks and regards

Bernie

I have to problem that the landing light of the PMDG 747 still illuminate the clouds/fog and so on when I turn the Landing Light Switches off.

Is there any fix for this problem?

Best regards

Dennis

I am having these lately with latest driver in P3dV4.5 HF2 in order in event viewer : Newest CTD first order

Any suggestion?

Location FSDT KORD atm.

Navn på program med fejl: SimObjectDisplayEngine.exe, version: 1.6.5.0, tidsstempel: 0x5da894e8
Navn på modul med fejl: unknown, version: 0.0.0.0, tidsstempel: 0x00000000
Undtagelseskode: 0xc0000005
Forskydning med fejl 0x0000333c
Proces-id 0x333c
Programmets starttidspunkt 0x01d59c74e333c7bd
Programsti: C:\Program Files (x86)\12bPilot\SODE\SimObjectDisplayEngine.exe
Modulsti: unknown
Rapport-id: 5f11eeb4-c7b7-439e-bd2a-65e34d598ff4
Fuldt navn på program med fejl: 
Relativt program-id for program med fejl: 

Navn på program med fejl: Immersion Manager.exe, version: 1.0.28.0, tidsstempel: 0x5cf28a2a
Navn på modul med fejl: ntdll.dll, version: 10.0.18362.418, tidsstempel: 0x99ca0526
Undtagelseskode: 0xc0000005
Forskydning med fejl 0x00000000000072a6
Proces-id 0xca0
Programmets starttidspunkt 0x01d59c74e331b382
Programsti: C:\OldProp Solutions Inc\Immersion Manager\Immersion Manager.exe
Modulsti: C:\WINDOWS\SYSTEM32\ntdll.dll
Rapport-id: 579f4435-b36f-411b-8da3-a102183595b7
Fuldt navn på program med fejl: 
Relativt program-id for program med fejl: 

Application: Immersion Manager.exe
Framework Version: v4.0.30319
 

Description: The process was terminated due to an unhandled exception.
Exception Info: System.AccessViolationException
   at <Module>.SimConnect_CallDispatch(Void*, Void (SIMCONNECT_RECV*, UInt32, Void*), Void*)
   at LockheedMartin.Prepar3D.SimConnect.SimConnect.ReceiveDispatch(LockheedMartin.Prepar3D.SimConnect.SignalProcDelegate)
   at A.m.A(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at System.Windows.Interop.HwndSource.PublicHooksFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
   at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
   at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
   at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
   at System.Windows.Application.RunDispatcher(System.Object)
   at System.Windows.Application.RunInternal(System.Windows.Window)
   at A.v.C()
 

Thanks

Michael Moe

I am using the immersion for the 747/777/737 and only get this problem in the 747 and not as bad in the 777. NGX is fine.

https://imgur.com/jZhouHT

https://imgur.com/UbtiOV0

https://imgur.com/5zafs93

It looks like ripples almost. I can get it to go away by dimming the landing lights but whats the point then.

If anybody has any ideas I would love to know. I know its immersion since I reinstalled P3D etc and its still there only with immersion.

Is it possible to close it for good and be opened only when we need it?

thank's

I've been trying to use 747 immersion with my Prepar3D v4.5 and all the previews are working, but none of them (except engine smoke) goes to green when I use any of the features. If I turn on the lights of the 747 all of them stay in grey status.

The immersion manger is recognizing perfectly that I'm using the 747.

Waiting to hear back from you! thanks

Would that be possible tp create a "heat haze" effect that one can usually see at the APU exhaust or behind the engines ?

cf. https://www.youtube.com/watch?v=dNAWmrn6bM4

Many thanks to Old Prop

When Starting P3D, Immersion Manager show popup and close automatically.

After Reinstall 747 Immersion. popup continue showing.

Popup windows message is "The immersion manager updated. Please restart you simulator to see your aircraft's visual effects properly."

How can I solve this?

I purchased and installed the 747 immersion package yesterday. Initially it seemed to be working. I could open the immersion manager and preview the effects. Didn't have time to try an actual flight until today.

I fired up my P3D V4.4 this morning to start a flight got to 36000ft and saw that no effects were visible. I tried to open the immersion manager from the program files folder and I didn't open.

So I decided to uninstall it from the VFZ central manager. Did a reinstall and tried again. Still the same problem, I get the message to enable the effects manager, I enable it, load up the 747-400 and try again to open the immersion manager, but it won't open. Only difference is this time I get a pop up message saying "The immersion manager was updated. please restart your simulator to see your aircraft's visual effects properly". Tried that but the same thing happens, same message pops up every time I try to open the immersion manager.

Also just to note, I am opening my P3D as administrator as was instructed and have disabled my antivirus and firewalls in an attempt to get it working.

Any help with this would be greatly appreciated.

Thanks,

Craig.

https://imgur.com/yumxi6r

Main initial symptom was heavy wing condensation showing, when the aircraft had landed and was static. At the same time I noted that tyre smoke effects were affected too, mostly not happening at all.
The only way too stop it was to kill Immersion Manager. Not ideal.

It was suggested that I reinstall Immersion Manager on the same drive as my OS. I did this, carefully, using admin privileges and rebooting my system between steps taken. There was no improvement with the issue, despite other FX in the product working as they should e.g. contrails. I supplied the log that was available at the time.

Further tests on my part showed the issue continuing to happen, but I was also seeing engine condensation with the aircraft static. Out of interest I stopped the 747 engines but that effect still continued, as did the wingcon.

The next thing I noticed was that in-flight, expected FX were not present. On checking I spotted that Immersion Manager had stopped running in the background, with no warnings to advise of an issue.

At my wits end, I decided to remove all OldProp products in an orderly fashion, reboot my system, and then start from scratch. Each product was installed to the OS drive using admin privileges. Testing the new installation my hopes were lifted briefly as in-flight FX were fine, but I am now back where I started a month ago, with wingcon and fine trails showing when static. I've supplied screenshots and the latest logfile, but have heard nothing back.

I really don't know what to try next, and would welcome your thoughts and suggestions.

regards

Dave

https://imgur.com/a/aWNyMeE

The VFX effect loads intermittently. Sometimes all on the 777, other times just the contrails on the 747. I have uninstalled and re-installed the VFX Central exe. and selected all applicble P3Dv4 aircraft.

And.. when the VFX does load to either the 777 or 747, the load manager does not allow me to green point check the various effects. The only effect that is checked on is the Engine Contrails.

I have submitted 2 Tech Supports tickets via the Old Prop website and have gotten NO response.

Any suggestions???😡😡