Over time, I realized that, in the market of single-engine and twin-engine aircraft for X-Plane and MSFS, some planes fully support these approaches, while others do not handle them correctly.

For example, the Milviz Cessna 310 does not fully follow the LPV approach: it captures the lateral path, and the glide path is detected, but the autopilot does not follow it due to its internal logic (KAP 140 type).

Thanks to analysis and guidance from artificial intelligence, I was able to better understand how GPS, the glide path, and the autopilot work, which allowed me to properly configure Reality XP and finally succeed in flying these approaches ;))  If anyone is interested in the correct Reality XP setup, I can share photos I’ve taken. It’s even better than long texts—after all, isn’t a picture worth a thousand words? 😄

I use RXP 430W V2 with Prepar3D V3, updated with the most recent Jeppesen database from my realworld Jepp subscription (I am a private pilot).

What I do not understand is why RXP 430W only sees RNAV approaches as "LNAV" while an "LPV" approach is available. Problem happens for example on European airports (LFPN, LFLA) while it seems to work normaly on an US airport (KHAO) with the same software and same database! Could the be a link with a pb of almanach data?

Thanks

25/05/05 15:33:23.444 26748 -    ] # win.xpl version 2.5.1.0
25/05/05 15:33:23.444 26748 INFO ] 
25/05/05 15:33:25.771 26748 INFO ] using GNSADBFILE = "C:\ProgramData\Reality XP\Common\GnsTrainer\dbfiles\worldwide.bin"

25/05/05 15:33:25.584 26748 -    ] # rxpGnsSim64.dll version 2.4.23.0
25/05/05 15:33:25.584 26748 INFO ] 
25/05/05 15:33:32.408 26748 INFO ] using: C:\ProgramData\Reality XP\Common\GnsTrainer\dbfiles\worldwide.bin
25/05/05 15:33:32.412 26748 INFO ] G430.1 - TRAINER 3300
25/05/05 15:33:32.657 26748 INFO ] using: C:\ProgramData\Reality XP\Common\GnsTrainer\dbfiles\worldwide.bin
25/05/05 15:33:32.664 26748 INFO ] G430.2 - TRAINER 3300
25/05/05 15:34:38.459 26748 ERROR] G430.2 unrecoverable error detected: rebooting device.
25/05/05 15:34:38.459 26748 ERROR] G430.1 unrecoverable error detected: rebooting device.
25/05/05 15:34:38.486 25836 INFO ] G430.2 - TRAINER 3300
25/05/05 15:34:38.759 25836 INFO ] G430.1 - TRAINER 3300
25/05/05 15:34:46.743 26748 ERROR] G430.2 unrecoverable error detected: rebooting device.
25/05/05 15:34:46.745 26748 ERROR] G430.1 unrecoverable error detected: rebooting device.
25/05/05 15:34:46.860 25836 INFO ] G430.2 - TRAINER 3300
25/05/05 15:34:47.180 25836 INFO ] G430.1 - TRAINER 3300
 

It seems that there is a problem with the new database files which causes an error and endless reboot cycles.  The working files are different sizes:  5236KB (working) vs 5290KB (not working).  Was there are change in the files between the database files in cycle 2413 and 2503 which would cause Reality XP to fail upon loading the database files?

According to Reality XP tools, I am up-to-date.

Thanks in advance to anyone who can help.

Quote

25/01/25 17:35:46.206 05564 WARN ] FPU FLT_MULTIPLE_TRAPS: c00002b5 at: 0x0003fee5 base 0x574a0000 in "C:\ProgramData\Reality XP\rxpGnsSim32.dll"
25/01/25 17:36:11.884 01920 WARN ] G530.1 recovered 1 fpu errors
25/01/25 17:36:11.991 05564 INFO ] G530.1 - TRAINER 3300
25/01/25 17:36:11.997 05564 WARN ] G530.1 process is running as-admin

 

I had three recovered fpu error - I should I be worried ?

Thanks

Gérard

I use the GNS 530 MOD from GitHub with the twin otter DHC-6.

I have seen a button in the direct-to tab in videos on YouTube that allows you to use your keyboard to enter the new waypoint.

But that does not appear in my gns 530, so I always have to use the button to write the new waypoint; honestly, it's annoying.

Any Idea?

Regards,

J

I´m using Fligt Simulator X Steam Edition on Windows 10. The Simulator works fine.

I have puchased the RealityXP GNS package. The installtion went well - no errors.

When I start the configuration for a aircraft the dialog for the configuration apears and the configuration also works well.

After the configuration the menu entry for the RealityXP GNS also appears in the cockpit configuration of the aircraft.

But when I activate it there seems to be a short flickering on the screen like someting aperas, but the GNS is not showing.

I checked a lot of forums and the manual but didn´t find a solution.

PRESS AND HOLD THE SHIFT KEY THEN RIGHT CLICK THE TOP EDGE

Not unexpectedly, this does nothing but bring up the default P3d view menu.

I know the settings are SAVED in the ini file but how do I create them in the first place when I cannot start the 'wizard' from the plane?

IMO this option screen should have been located also in the RXP menu so that you can always access it.

At the moment I'm using a Lancair Legacy with one 530 in it. Looks fine but cant ASSIGN most GPS functions due to not being able to access the above applet and the dials are hellish to turn need activate legacy controls also.

Thanks in advance!

I would like to install the Reality-xp G530W in the Caravan EX in MSFS 2020.

I am using a Window 11 operating system.

Is the G530W from Reality-xp compatible with Window 11?

Thank you very much.

Got the download automatically on my setup.

Currently Autopilot not supported:

24/02/08 06:21:15.812 19772 -    ] # rxpGNS2.dll version 2.6.8.0
24/02/08 06:21:15.812 19772 INFO ] 
24/02/08 06:21:18.275 19772 INFO ] using GNSADBFILE = "C:\ProgramData\Reality XP\Common\GnsTrainer\dbfiles\worldwide.bin"
24/02/08 06:21:27.496 19772 WARN ] Autopilot not supported on this platform (vers: 6.1.10.31609)

 I have this issue with both GTN and GNS, but I'm posting here because the GNS is the unit that is currently installed on the plane.

Ok, Alabeo Saratoga TC P3D5.  When I enter a flightplan or just a Direct To leg, the CDI is in GPS mode, when I hit NAV, the AP will turn due North and continue in that direction. As I said, this is with the GTN unit and the GNS unit, I'm using HDG mode to get to the path and no matter where I'm at in relation to it, either on it, just left or just right, hit the NAV button and it turns to 360/00 Degrees, due North.

 I installed the GNS using the Alabeo/Carenado installer and then adding the unit(s) with the RXP installer in the Sim.

During the install  process near the end it froze.
I have a key.
I tried to do a reinstall first using the key and when validating the PW (last 4 digits of my CCard your install program tells me the password is invalid.
I am then instructed to contact support. Which I attempt to do so - see first line of this post.

So, I try the other way and no joy getting it reinstalled that way.. Firewall and VPN are paused.

So, I have no idea how to proceed now. 
I await your response.

On this form under your box to be filled "timeframe" I have no idea what to do with that so i selected 1 month.

-------------------------------------------------
This product was purchased yesterday.

I have proof that payment was accepted and you acknowledged my purchase by the usual emails.

I tried again this morning with the same result. Again, Firewall and vpn are paused.

The only way it seems your installer will allow me to proceed is to purchase again.......

.....Not happening.

I await your timely response..

Problem: When the plane loads and I hit the master bus switch, the RXP 430 and/or 530 (I use 530 for NAV/COM 1) does not appear or start. If I go to the RXP plugin menu and deselect the 430/530 and reselect it again, it will come back. This happens again randomly - sometimes I get lucky and everything seems to work normally.

Is there some kind of timing bug when the GNS trainer is ready to boot up the avionics? Anyone seen this?

But I still have a question: If i updated "\ProgramData\Reality XP\Common\GnsTrainer\dbfiles\006-d0170-30.bin" with Garmin's avtn_db.bin file from the real thing, is that enough? Or do i need to do something else? I am in North America.

From the panel.cfg file:
[Window01]
background_color=0,0,0
size_mm=490,357
//position=0
position=8
visible=0
always_visible=0
ident=15531
sizeable=1
//window_size=0.360,0.400
window_size=0.250000,0.382381
gauge00=rxpGNS2!GNS_530_1,0,0,490,357

From the RealityXP.GNS.ini file:
; left mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
; popleft =
popleft = 15531
; right mouse button on the screen toggles popup window by ident (ex: GPS_PANEL or 225).
popright = 

I can not work out the 35% or 50% coupons? Basically I want to download and use the 530 and 750 and am willing to pay for them, and use them in P3D V5. How do I do this/

Thanks,

Graeme

But I cannot power up the trainer. The program runs, but clicking on the power-up button results in nothing happening. Any advice appreciated.