RXP Legacy Latest Topicshttps://dev.avsim.com/forums/forum/774-rxp-legacy/RXP Legacy Latest TopicsenCan Sandel 3308 work with ANY aircraft in FSX?https://dev.avsim.com/forums/topic/689330-can-sandel-3308-work-with-any-aircraft-in-fsx/ Can Sandel 3308 work with ANY aircraft in FSX? I need to practice with this instrument for the real unit. Thanks.

WW

]]>689330Thu, 05 Feb 2026 17:33:20 +0000GTN 650 or 750 standalone?https://dev.avsim.com/forums/topic/663581-gtn-650-or-750-standalone/ Dear,

I have a home cockpit and I run XP11.  I know that the instrument in the virtual cockpit are pop up windows which can be moved elsewhere.  Buy soing so, XPlane runs in windowed mode which kills my FPS by 2.

My question is: can the Reality XP GTN 650 or 750 be ran separately from XP11 as a stand alone while stile communicating with the sim? Like what Air Manager does for instance?

Thanks.

Cheers. Stef

 

]]>663581Sun, 02 Feb 2025 23:33:33 +0000GNS430 will not reinstall to new computerhttps://dev.avsim.com/forums/topic/645828-gns430-will-not-reinstall-to-new-computer/ I have been trying for three days to reinstall the X-Plane GNS430 from a Windows 10 to a new Windows 11 computer. I was able to reinstall the GNS530 and both of the GTN750/650.

But for some reason the 430 will not download normally. If I get it to download it does so with size 0KB and with a note 'failed'.  The file then disappears off the computer if I try to run it. If the other three RXP units download and install with no problem then it only makes sense that there is something different going on with the GNS430 file. So far the support at Flight1 has not been of any help other than to validate my account is good and the software has been reset.

Can someone at RXP be of any help...or send me the file in an email?

Thanks,

Alex

]]>645828Mon, 24 Jun 2024 19:38:36 +0000FSX Steam Edition Reality XP Problemhttps://dev.avsim.com/forums/topic/602530-fsx-steam-edition-reality-xp-problem/ When I select an aircraft in FSX Steam edition that has a RealityXP profile enabled on it, the game crashes. 

Never had this problem on the old CD version, but that stopped working on my other computer recently.

I have the garmin trainer installed as well in case that might have been an issue

Is there any fix for this?

]]>602530Mon, 28 Jun 2021 03:55:27 +0000Reality XP 430 will not download? No permissions?https://dev.avsim.com/forums/topic/644392-reality-xp-430-will-not-download-no-permissions/ I have tried over and over to download Reality XP 430.  No success.  I have successfully downloaded the Reality XP 530, no problems.  I keep getting an error message saying I do not have permissions?  See attached screenshot.  Any advice would be appreciated.  I really need this plug in for training for my IFR Check ride. 

]]>644392Sat, 27 Apr 2024 20:45:40 +0000rxp wx500 fsx steamhttps://dev.avsim.com/forums/topic/642379-rxp-wx500-fsx-steam/ is rxp wx550 fsx compatible with fsx steam?

]]>642379Sun, 18 Feb 2024 14:50:27 +0000Flight Line N e T do not work on FSX Steamhttps://dev.avsim.com/forums/topic/642352-flight-line-n-e-t-do-not-work-on-fsx-steam/ I installed fsx version of flight line N e T on FSX Steam, but when I try to load an aircraft with these gauges on panel.cfg, fsx crashes to desktop!!!

someone could help me? thanks in advance

Maurizio

]]>642352Sat, 17 Feb 2024 14:20:10 +0000430W with Microsoft ESP not workinghttps://dev.avsim.com/forums/topic/625280-430w-with-microsoft-esp-not-working/ spacer.png

I am trying to get the 430 with a hardware Bezel to work in a helicopter sim ( Flyit) that has Microsoft ESP and P3d v2. All I can get up is this splash page where the resolution doesn't look exactly right yet. Pushing the power button has no effect. 

I've searched the forum for a Reality XP running with ESP but not been able to find anything. Does anyone have the 'manual' for this older version circa 2011 that gives the installation details. Anyone running a similar configuration using ESP that might have some clues.

Thanks

Geoff

 

 

 

 

 

]]>625280Thu, 13 Oct 2022 01:27:18 +0000Sandel ST3400 FS9 Win 7 64bithttps://dev.avsim.com/forums/topic/635495-sandel-st3400-fs9-win-7-64bit/ Should the Sandel work?

regards

Ed

]]>635495Fri, 30 Jun 2023 11:10:25 +0000I'm not able to install GTN 750 FSXhttps://dev.avsim.com/forums/topic/626074-im-not-able-to-install-gtn-750-fsx/ I'm not able to install the gtn 750, can someone help me]]>626074Wed, 02 Nov 2022 01:04:13 +0000430W database updatehttps://dev.avsim.com/forums/topic/613421-430w-database-update/ When using the reality XP with x-plane 10, do I update the database in reality XP unit or do I update the database in the x-plane 10? And if I update the database and the reality XP where do I get the updates from? Thanks much.

]]>613421Wed, 12 Jan 2022 18:35:13 +0000PFC 430 v2.0 -- Update to 3.3 / XP9https://dev.avsim.com/forums/topic/609490-pfc-430-v20-update-to-33-xp9/ Hello! 

Forgive me if this has been asked before -- I haven't had any luck in searching for the answer. 

I am a Flight Instructor at a flight school and we recently purchased a PFC CAT IV MFD AATD. It hasn't been updated in a quite awhile as it was from a third-party. I would like to update the RXP (which is currently at 2.0) to the new RXP 3.3. I am hoping to do this without messing up the current panels on the planes we used that are PFC approved. If that's not possible, I wanted to see ways we could update the navdata base so we can at least shoot the approaches at our airport. Currently, we have RNAV approaches and did away with the VOR approach but the navdata base still only has the VOR approach. 

I am not too savvy on XP9 or the PFC system. So, any help is greatly appreciated. 

]]>609490Sat, 30 Oct 2021 16:03:58 +0000Reality XP hardware driverhttps://dev.avsim.com/forums/topic/606691-reality-xp-hardware-driver/ The installer for the hardware driver is getting stuck at the begin purchase stage.  Is it no longer for sale?

I was fortunate enough to find a PFC avionics stack with a PFC430 module for a steal and I've been excited about driving a GNS unit with it.  It was a pain to get it working with P3D v4.5 but I have.  I wasted some money on "that other GNS" that looks like a cartoonist put together so I came back and picked up the RXP 530.  

]]>606691Wed, 08 Sep 2021 19:32:50 +0000Installing FLT-Gauges into P3Dhttps://dev.avsim.com/forums/topic/584319-installing-flt-gauges-into-p3d/ I have a new sim PC and am reinstalling everything (win 10).  When I try to install FLT gauges and I am supposed to choose the FSX install folder, I choose the correct P3D folder and I get the following error:  "xxxx  is not a valid Flight Simulator X folder.  Be sure to choose the folder where fsx.exe is located".  It doesn't matter what folder I try to use.

I know that I was using the gauges previously in P3D v4, so I'm not exactly sure why there is an issue.  Is there a work around or some other way to extract the gauges?  I don't need any of the other utils, just the gauges to drop in the gauges folder.

 

 

]]>584319Fri, 11 Sep 2020 06:16:44 +0000Weater radar for FS2004 on Win 7 x64https://dev.avsim.com/forums/topic/603231-weater-radar-for-fs2004-on-win-7-x64/  

Hi

I'm interested in the work of the meteorological radar on the version FS2004 in Windows 7 x64 bit.
I want to buy this product.
Tell me if the radar will work, or is it needed Windows XP x32?

]]>603231Mon, 12 Jul 2021 08:39:18 +0000Reality XP Not Workinghttps://dev.avsim.com/forums/topic/602490-reality-xp-not-working/ My computer crashed with the blue screen of death. Then I did a complete system restore from a previous save point. Unfortunately Reality XP is not working anymore.  Note: I am using Windows XP. Please see the image below.

 

Reality-XP-Not-Working.jpg

]]>602490Sun, 27 Jun 2021 14:11:57 +0000Trouble on Legacy Reality-XP product re-installs! (resolved)https://dev.avsim.com/forums/topic/568195-trouble-on-legacy-reality-xp-product-re-installs-resolved/ First off I want to acknowledge that while the products in question are no longer supported they work just fine for me. Its not the actual products themselves that are the problem, its the v2.31 e-commerce wrapper that will not allow me to re-install them.  I've been in contact with f1, and after looking at it, and them manually renewing my keys on their end, the problem still continued.  The wrappers themselves consistently tell me they are transmitting the data, but then turn around post two messages to me, first that its could not establish a proper connect to the server, and second that the key data might be bad or corrupted.  I am running Windows 7, and went to extensive lengths to try and correct this on my end.  UAC turned off, Windows Defender turned off, Windows Firewall turned off, ran as Admin, as well as trying every single compatibility option available. It simply will not connect with the server. Anybody have any ideas how I can fix this?

Thanks!!

WX-500, Sandel 3308 & 3400, Jetline's 2 & 4 all FS2004 only versions.

]]>568195Mon, 16 Dec 2019 23:56:38 +0000Sandel St3400https://dev.avsim.com/forums/topic/600093-sandel-st3400/ Wow. Nice work sir. 

Cockpit builder here. Is there a way to remove the bitmap bezel to the ST3400? I have had my own bezel laser cut from acrylic and have added switches assigned based on the Keyboard settings in the INI file? They work very nice with the exception of the "VUE" entry. I was hoping you had a quick solution to removing this before I have to dive into the gauge coding. 

Many thanks for this awesome gauge. Its extremely obvious you put a ton of time and work into this, and your many other, gauges. Truly superb!!!

Michael
www.757simulator.com

]]>600093Fri, 07 May 2021 06:49:38 +0000LevelD 767 and Gear Disagreehttps://dev.avsim.com/forums/topic/540488-leveld-767-and-gear-disagree/ Do you have any plans to fix this? There are countless comments on many sites by folks indicating they never experienced this EICAS message in LevelD until installing WX500. Well you can add me to the list. It is obviously a bug in the Reality XP software. Again do you intend to fix this? If not, it would be fair to post on your website that the WX500 software is "incompatible" with the LevelD 767 software.

Respectfully,

Mitch

]]>540488Wed, 15 Aug 2018 05:01:55 +0000Bonanza A36 GNS 430 530https://dev.avsim.com/forums/topic/596823-bonanza-a36-gns-430-530/ Hi everybody !

I bought an old used A36 Bonanza from F1 Software, to try the included Reality XP GNS.

Unfortunately, the installer displays the message "Windows Exoplorer setting may affect the GNS simulator". Actually, the GNS won't work at all nor show as a pop-up.

I am at a loss to understand what the above message means, and how, if ever, I could fix this issue.

My computer is Windows 10 run, and my favourite explorer is Chrome. Maybe Chrome is in some way involved...

Thank you !

Alain

 

]]>596823Tue, 09 Mar 2021 12:59:21 +0000Volume knob in GNS430 ?https://dev.avsim.com/forums/topic/595841-volume-knob-in-gns430/ I am using GNS430 v1 (legacy for FSX) in A2A C172, and I am trying to turn down/off the ident morse signal that comes up when Nav1 (vor1) is tuned in.

I have two sources of the same signal: one coming from the sound panel (controlling com1, com2, nav1, nav2, etc) and one from the GNS430 alone (since it is setup to work as Nav1).
now, I can turn off the one from radios by clicking on Nav1 on stack, but cannot turn off the one coming from GNS.

in the manual of the real Garmin GNS430 it says that this can be done using the small knob on the left, right under the one used to power it on. But in the RealityXP model for some reason this little knob is used to control dim of the screen. 
Is there a way to return this knob to its original settings and control the ident volume?

is there another way to do that?

 

many thanks

]]>595841Sat, 20 Feb 2021 14:24:53 +0000<![CDATA[FS9 - Pb to manage OBS, QNH Flight T & N gauges]]>https://dev.avsim.com/forums/topic/593592-fs9-pb-to-manage-obs-qnh-flight-t-n-gauges/ Hi,

first, happy new year  !!!

--

i'm building a home copkpit and i have bought Flight T & N gauges.

I use a iTra Module to manage AP, differents radio instruments like QNH, CRS for vor 1 & vor 2...

My problem : when i chnage the CRS of the VOR 1 or 2 it's work fine with a standard FS gauge but not with these RealityXP gauges... ☹️

It's the same thing with the QNH....

Does somebody know how i can control these parameters ? (i don't want to use the mouse and clic to the appropriates zones)

Sorry for my bad english because i'm french (who live in Normandy) 😁

 

]]>593592Tue, 12 Jan 2021 12:43:32 +0000Lack of vertical path indicator in G500https://dev.avsim.com/forums/topic/593728-lack-of-vertical-path-indicator-in-g500/ In the Carenado Seneca and Alabeo Chieftain (both with G500 PFD), I get a glide slope indication on an ILS approach, but no indication on an RNAV LVP approach.  Is there a fix for this?

]]>593728Thu, 14 Jan 2021 19:53:07 +0000FLT and FLN Settings: modelshttps://dev.avsim.com/forums/topic/582396-flt-and-fln-settings-models/ With FLT/N multi-model capable gauges you're supposed to setup the panel.cfg with the generic gauge name (like Altimeter) and then use the "Config Tool" in order to set the specific model. The other single-model gauges don't need any particular model.

If you know the values you can also manually set the model up in the RXPFLT.ini and RXPFLN.ini files directly using notepad.exe

Here is a probably non exhaustive lists of these values:

FLT
Gauge Names (Models)

  • rxpFLT!KI256
  • rxpFLT!KI525
  • rxpFLT!KA51
  • rxpFLT!Airspeed
    (0: Generic 160 Kts, 1: Generic 200 Kts, 2: Beechcraft 260 Kts, 3: Cessna 200 Kts, 4: Generic 260 Kts)
  • rxpFLT!TurnCoordinator
    (0: Generic, 1: Beechcraft, 2: Cessna, 3: STEC 30)
  • rxpFLT!VerticalSpeed
    (0: Generic 2000 fpm, 1: Generic 4000 fpm, 2: Beechcraft 4000 fpm, 3: Cessna 2000 fpm, 4: Generic 3000 fpm, 5: Generic 6000 fpm)
  • rxpFLT!Altimeter
    (0: Generic Dual, 1: Generic Single, 2: Cessna, 3: Generic Digital)
  • rxpFLT!Gyro
    (0: Generic No HDG, 1: Generic, 2: Cessna Type1, 3: Cessna Type2)
  • rxpFLT!Attitude
    (0: Generic Cyan/Gray, 1: Generic Blue/Gray, 2: Generic Blue/Brown)
  • rxpFLT!Dimmer
  • rxpFLT!AltHld

Sample RXPFLT.ini file:

Spoiler 

[SETTINGS]
SimpleMouse=Off
Light=Standard
LightVC=Standard
Info.Text=255,255,96
Info.Back=0,0,0
Info.Reverse=Off
Dimmer=On
KI256.Popup=
KI256.FlightDirector=On
KI256.DrawRate=18
KI525.Popup=
KI525.DriftRate=3.0
KI525.DrawRate=12
KA51.Vertical=On
Airspeed.Popup=
Airspeed.Type=1
Airspeed.Mounting=0
Airspeed.DrawRate=18
Airspeed.VS0=52.0
Airspeed.VS1=64.0
Airspeed.VFE=123.0
Airspeed.VNO=167.0
Airspeed.VNE=196.0
Airspeed.VLE=154.0
Airspeed.VLE.Color=236,233,246
Airspeed.Red=185,71,59
Airspeed.Yellow=237,215,57
Airspeed.Green=86,144,60
Airspeed.User1.IAS=0.0
Airspeed.User1.Color=64,94,226
Airspeed.User2.IAS=0.0
Airspeed.User2.Color=237,215,57
Airspeed.User3.IAS=0.0
Airspeed.User3.Color=185,71,59
Altimeter.Popup=
Altimeter.Type=0
Altimeter.Mounting=2
Altimeter.DrawRate=15
Altimeter.50s=Off
Altimeter.inHg=Off
Altimeter.BaroZoom=On
Altimeter.Standby=Off
Altimeter.Indicators=Off
Attitude.Popup=
Attitude.Type=0
Attitude.Mounting=0
Attitude.DrawRate=18
Attitude.Card=0
Gyro.Popup=
Gyro.Type=0
Gyro.Mounting=0
Gyro.DrawRate=12
Gyro.DriftRate=10.0
TurnCoordinator.Popup=
TurnCoordinator.Type=1
TurnCoordinator.Mounting=0
TurnCoordinator.DrawRate=12
TurnCoordinator.S30BootTime=30
VerticalSpeed.Popup=
VerticalSpeed.Type=2
VerticalSpeed.Mounting=0
VerticalSpeed.DrawRate=18
VerticalSpeed.IVSI=Off

 

FLN
Gauge Names (Models) :

  • rxpFLN!FDAP
  • rxpFLN!ST55X
  • rxpFLN!ST645
  • rxpFLN!ST360
  • rxpFLN!VOR1
    (0:GI102A, 1:GI106A, 2:KI203, 3:KI206, 4:KI208A, 5:KI209A)
  • rxpFLN!VOR2
    (0:GI102A, 1:GI106A, 2:KI203, 3:KI206, 4:KI208A, 5:KI209A)
  • rxpFLN!ADF
    (0:KI227, 1:STEC)
  • rxpFLN!RMI
    (0:KI229, 1:KNI582)
  • rxpFLN!Altimeter
    (0: Generic Dual, 1: Generic Single, 2: Cessna, 3: Generic Digital)
  • rxpFLN!Manifold
    (0: Simple InHg, 1: Dual InHg/Fuel)
  • rxpFLN!Dimmer

Sample RXPFLN.ini file:

Spoiler 

[SETTINGS]
SimpleMouse=Off
Light=Standard
LightVC=Standard
Info.Text=255,255,96
Info.Back=0,0,0
Info.Reverse=Off
Dimmer=On
VOR1.Popup=
VOR1.Type=1
VOR1.Mounting=0
VOR1.DrawRate=15
VOR1.OBS=Real
VOR1.FSOBS=Off
VOR1.AutoDisplay=Off
VOR1.GPS=On
VOR2.Popup=
VOR2.Type=3
VOR2.Mounting=0
VOR2.DrawRate=10
VOR2.OBS=Real
VOR2.FSOBS=On
VOR2.AutoDisplay=On
ADF.Popup=
ADF.Type=0
ADF.Mounting=0
ADF.DrawRate=15
ADF.HDG=Real
ADF.Simulation=Real
ADF.ParkNeedle=Off
ADF.Slaved=Off
ADF.AutoDisplay=Off
ADF.Channel=1
RMI.Popup=
RMI.Type=1
RMI.Mounting=2
RMI.DrawRate=15
RMI.Simulation=Real
RMI.ParkNeedle=Off
RMI.ADF.Channel=1
RMI.VOR.Channel=1
RMI.ChannelSwap=On
ST55X.Popup=795
ST55X.MaxVS=1800
ST55X.MaxAlt=30000
ST645.Popup=
ST360.Popup=
Altimeter.Popup=
Altimeter.Type=1
Altimeter.Mounting=0
Altimeter.DrawRate=15
Altimeter.50s=Off
Altimeter.inHg=Off
Altimeter.BaroZoom=On
Altimeter.Standby=On
Altimeter.Indicators=Off

 

 

]]>582396Tue, 25 Aug 2020 23:50:18 +0000Drop Gauge not loadinghttps://dev.avsim.com/forums/topic/575751-drop-gauge-not-loading/ I've just updated GNS530 WASS [fs9] . Now the rxpDrop.GAU  does not load. It is still in the gauge folder but will not load. Does anyone know how to repair this . Thanks.

]]>575751Sat, 23 May 2020 14:42:59 +0000