I am having an issue with FS2Crew PMDG 777. On running the pre flight procedure the FO comes back from the walkaround. Then says ready for pre flight. The countdown clock is at 15 minutes. I say "Ready for the Preflight" but there is no response. The main window just says "Activate FS2Crew" and the up and down arrows to the right do not change this to anything else. My mike seems to work as my words are shown in the green bar. Likewise the Audio test was good.  How do I get the FO to read out the checklist please? I have just completed a fresh reinstall.

Cheers

Peter Coveney

https://ibb.co/wwDz7ST

I don't understand what's going on because it just started doing that.  Ive changed nothing.  I've reinstalled the software and no change.  My mic is recognized by Windoze 10 and works fine.  Any idea?

-Rick Schaefer

My problem here is that when I use the default Microsoft driver it'a sounds okay and voice recognition works fine. However when I install the razer synapse driver voice recognition stops. I also have voxatc and when trying to run that I get an error asking me to select a US English compatible recognizer. Fs2crew as well doesn't pick up any sound. I'm able to try recording my voice on online websites and hear it back and it sounds fine. The only reason I like using synapse is so that I can control the lighting and sound quality and it's quite nice. However this breaks the best addon of p3d, fs2crew and voice recognition. 

I created a restore point and go back to that point where the driver and software wasn't installed so that I can use everything as before. 

Any help would be appreciated. Thanks. 

I recently got the problem that from one flight to another, FS2Crew does not recognize my voice anymore. I first noticed it in the T7 but checked also for the NGXu: same problem.

It has been working flawlessly for years but suddenly stopped working.

I checked back for any changed settings and also checked the internet/forums for possible reasons why it stopped working but without any success.

Everything is set up just like it was when it still worked. ( Including the system settings as given in the FS2Crew manuals)

Is there any additional known reason for FS2Crew to suddenly stop working?

Best regards,

Hi guys, as I am not from English speaking country, my laptop's system is in Mandarin, I'm not sure if that is the point that my voice control is not able to be activated.

I have followed the instruction by fs2crew manuals, does anyone know how to make it fix it?

I love FS2Crew and uses it for all my PMDGs as well as for the FSLabs.

I think the 777 version needs a complete rework from the base. I am using 3.5 and nothing really changed or got better than the versions before, so I am quite disappointed!

The look is 2014 style, the F/o pushes the WPT button, the ECL does not work well (pops up and shows engine dsp, even I selected force ECL closed), so I gone back to paper, the F/O does not asks to start the APU and the briefings are not what I am used to. There are some other little things. The "soft mute" key should be the same as for the other versions....

Unfortunately, this version of FS2Crew isn't good under the line 😞

I hope, there will be a re-work to have this problems soved....

Greetings from EDDM!

Sebastian

when i start it up  fs2crew says....there is a newer version

i only see the psd version i have fsx 

any ideas???

thanks and rgds 

ken cyyc

The main panel doesn't work when I press the autofeather button. It worked in the past but this last time not. I didn't change anything and I checked everything in the OPS manual. but nothing worked. 

Is there anything else I should try.

Respectfully,

Charles Kiel

New here.  I have a question.

During the shutdown flow by the FS2Crew FO, I can hear an alarm bell.  Do you know what triggered that alarm bell?  Sounds strange to me.  Any information would be appreciated.  Thanks!

With best regards,

PS

Glenn Hutchinson

The text in the FS2Crew seems too large. I've already checked the font size in Windows Font (normal) to 100 percent.

I also reinstalled the FS2Crew.

Thank you

Cris

i got a issue with my gaming headset i brought the blackweb game headset with mic and the pc picks the mic up but the fs2crew doesn't work i check the mute off and the panel the hs button on and the voice button doesnt want to stay on on is there a way to fix this olso some of the fs2crew panel saying there a update someone said all you got to do is go back on the fs2crew and redownload the software again done that but still saying the same to install the update 

thanks 

martin 

So I received the mailer that November is updates month. Was wondering if the 777 would get some love? Do u have any user requests that you think you would include? 

A personal request of mine is to let fs2crew and gsx work better together if possible? (control doors). I know the ultimate ground crew x may do that better. 

I'd love to help test any of the new stuff if u need. 

Regards, 

I have a problem with the FS2 Crew Voice Version for the 777
I can work everything through to the checklist before the start.
But in the checklist before the start, it is so that I can not cope with MCP.
V2 will recognize HDG and TRK, but Altitude will not continue ...
Altitude is recognized as two two in the green status bar when I say altitude and 6000Thousand and I dont know why !!!
When I use the voice control and say altitude, the word is recognized !!
I do not know what I can do because someone has an idea

Status: April 27 2013

Still waiting on PMDG to release the 777!

I have no idea when that will be, so do not ask, speculate or threaten to water board me to find out when!

I don't know B)  

As for what you can expect with the 777 version of FS2Crew:

It will be very similar to the NGX version in terms of features and functionality, except modified to match 777 specific procedures.

There will be two versions like there was for the NGX:  Voice Control and Button Control.

While you're waiting, you can start using our new 777 specific forum signature:

Here's a direct link you can use for the above Forum Signature:

http://fs2crew.com/cart/temp/fs2crew777.jpg

I have a quick question regarding the Vref challenge during the landing data challenge.  I'm having the same issue in both the 777 and the NGX reboot.  When the landing data challenge is spoken by the first officer, I respond with, "vRef  is One Four Five, minimums, Two Seven Three feet"  (or whatever the actual numbers are).  The problem I am having is that after speaking the Vref One Four Five, the first officer says "Check" and then after I speak the minimums there is never a response, so I always have to go with the "set and checked" answer to move to the next item.  As I mentioned, i am experiencing the same issue with both the 777 and the NGX reboot, all the other checklists work with no issues in both aircraft, this is the only hiccup that I'm having.

Am I responding to the challenge incorrectly? 

Richard

When I go to  configuration and click on activate the tab stays blank.

it just stopps then i need to save and restart the sim audio resat and test dosent work..

Voice and HS is on. Tried clicked voice off and on again also but doesn't work.

First connected the USB headset through a HUB so i thought might be a problem but even connected directly didn't help.

Thanks

Swadeep

I really appreciate fs2crew and to 95% its a damn handy tool, i just want to show some major bugs i'm experiencing.

Checklists:

Sometimes it works, sometimes it doesnt. Sometimes the checklist comes up as blank, sometimes the f/o unchecks an item that should be checked. Sometimes

he opens an inappropriate list. Calling out the descent checklist and all of a sudden the before start list gets opened and checked down while reading the descent list.

APU:

Even as told to start the apu after clean up the f/o doesnt do so. No Problem because you still can give the voice command apu on but that shouldnt be the case, right?

MAJOR BUG:

At the command Autothrottle off he only turns of my right Autothrottle which turned into an intense situation while not recognizing it the first time after touchdown while reversing the

right engine and having an idle left engine.

Maybe i'm doing something wrong here but if not its maybe a nice to know thing for the development-Department.

Cheers,

Tom

My logitech h800, very comfortable sends me the execution of "RUNWAY ENTRY PROCEDURE" messages "CHECK" and the captain answers "hold" ...

I tried with a less efficient model, the Logitech H600 and everything works well BUT it is very incorforatable after 1 hour of use ..
Thank you for your proposals and experiences.

Best regards

Jean de VILLENAVE  D ORNON

After running RUNWAY ENTRY PROCEDURE I hear a CHECK message that repeats every 10 to 15 seconds?

Second question A radio casque Wifi it-is correct ,

Best regards

Jean de bordeaux France