It used to be available as a patch on the Carenado site, but it seems to be no longer there.

Thanks.

Graeme

Thanks for any ideas!

John

I d/l and installed the Carenado F33A for P3D v4, and it all works OK, except I can't turn on the Internal lights, the switches (wheels)

seem to move but no lights.

Anyone knows about this and how to correct it???

Thanks

Is this not modelled in the Carenado Bonanza? Or am I doing something wrong?

So if the real thing isn't like what is modeled I was thinking I might try to look at the xml and see if something could be done about it, if it is a xml gauge, does anyone know where this xml might be located?

Thanks Mark :Idea:

2) I installed the optional Bernt Stolle Air file and I noticed that the Fuel Flow now doesn't really match up to where it should be for T/O at the different Field Elev. Its always low now, is that expected with the patch?

3) Does the decision height light work on Art. Horizon?

Apparently only released for FSX, but I have it running very nicely in P3D v3.4. Everything works.

I did a straight "copy & paste" into P3D v4.

 Most everything works except power to the gauges. 

It flies, all controls work, light switches that are meant to work, move.

The "on/off" buttons for AP etc don't move, but i think they will if I can get power to them.

Avionics Master switch clicks On & Off , just no juice.

Gauges are not black holes, dials etc are populated.

Would love to get this aircraft going. 

Any thoughts?

Anything I can tweak?

T45

Getting to grips with the F33 as a new user but have a persistent problem.

I can't stop the ident morse code audio playing, by changing frequencies or even when the Com radios are switched off. The only thing that stops it is turning off the master avionics switch.

It must be something I'm doing wrong, since no one else is complaining about this in the forum and for sure everyone is not flying around with that going on in the background.

Please could someone make a suggestion as to how I should turn this off.

Thanks in hopeful anticipation

Andrew

I have just installed the Carenado F33 Bonanza and am having a few minor problems right away.Any advice received would be very much appreciated.

My initial problems are:

No Beacon displayed on tail when it is switched on.

No luggage shown when selected, but chocks etc do show.

Can't shut up the ident morse code, even when radios are switched off

Any suggestions please?

Thanks in anticipation.

Andrew

I am looking for a GA single piston FSX aircraft to practice my IFR and medium / long cross country flights.

So far I used Carenado Bonanza F33A with Reality XP gauges FLT, FLN and GNS 430. Very nice, indeed.

Now I see that A2A came out with a beautiful simulation of Cessna 182. I know it is a bit slower than the Bonanza and does not have retractable gears (the two things are correlated, I believe...), but both are "complex" aircraft in the sense that have constant prop speed control.

What is better, especially for IFR?

I see that I could use my XP GNS 430 and an HSI on Cessna 182 as well, but I don't know how good is the autopilot Bendix King KAP 140 that A2A is simulating on the Cessna. 

Any comments on this, please? Should I switch to high-wings for IFR?

Thanks!

I recently moved to a Windows8.1 machine. All works fine (FSX Accelleration, ORBX Global Base & Vector, Global mesh, REX4). 

I tried to install the RealityXP FLT and FLN gauges on my Carenado F33A Bonanza but with no luck. The aircraft just never loads up. I read many threads in various forums, and there seems to be no solution, at the moment (please tell me if you know one). My final understanding is that during installation RealityXP forces you to put a Reality folder in C:/Programs (x86) without giving the options to change that. And this might be a problem in Windows8.1. If anybody know how to hack this and change the default directory, please let us know (so my people would thank you for that!!!).

I have installed RealityXP WAAS 430 (the GPS), and I have read that this should not give any trouble even in Windows8.1. In my hands, the aircraft loads up if I disable my antivirus (and run everything as administrator), but I am now experiencing some FSX crashes, which I wasn't before. 

Anybody could suggest some step to optimise my installation of WAAS 430 on my F33A, in Windos8.1 environment?

Many thanks!

All good so far, but I would light to program the 6 small switches on the quadrant to control the light switches (Beacon, Nav, taxi, landing, Strobe, ...) on my Bonanza F33A.

Unfortunately, when I go in settings/buttons in FSX I don't see listed most of these lights (I think I see only NAV and Landing), so I don't know how to make the assignment virtual-switch to physical-button for all the others...

Any help, please? Thanks!

am I supposed to see the N number (tail number, I guess) anywhere in the virtual cockpit of my Bonanza F33A? I see a blank rectangle on top part of instrument panel, but nothing is written on it.

Any comment or advice on this? 

many thanks!

I am reading the review for the F1 GTN products and considering the 650 for the F33A as a RXP 430 replacement. Considering the F33A sample pictures in the review, the GTN 650 seems to be a natural. By the way, I assume the restriction to not cross-utilize Flight 1 GTN  along with RXP products applies only to avionics (e.g. RXP 430-530) and not to RXP FLN options.

Can someone provide pro's & con's?

Many thanks,

Les Parson

I recently installed Active Sky Next and have their gauge (a radar gauge to visualise weather generated by ASN) as a pop-up window. It works fine, but it would be more realistic to have it embedded in the virtual cockpit on my Bonanza F33A. 

I have very little idea of how to do it. I know I should add something in the Virtual Cockpit paragraphs in panel.cfg and maybe something in gauge.cfg, but really not sure of the details...

Can anybody help/hint?

I will share the result when finished.

Thanks!

does anybody know if there is an "add-on", "extension", or whatever is called, to add HD sounds for the switches (such as lights, or radios, or Flight Director...) in the cockpit of Bonanza F33A by Carenado?

Thanks!

I was trying to find if there was a keyboard shortcut to toggle the AVSS from Altitude mode to Ascend/Descent rate mode and back again?

I think a quick mouse click will keep switching mode but I would like to assign a key so I can potentially use my VRInsight box.

Thanks in advance

For some reason the EGT gauged is barely responding to Mixture changes (only on this A/C), making me adjust by monitoring the engine sound, & changes in fuel consumption

Any idea ????

Tnx

Yair

I'm asking help for my problem. In the HSI the course deviation indicator doesn't follow the route in my gps. I think the yellow  course needle should always point to the next waypoint (and show deviation) but now it doesn't move. I have the RXP KI525 and my gps is Mindstar's 430. I have selected gps as nav source from the mindstar gns430 CDI-button. Autopilot flies the route correctly as in gps  but the crs needles doesn't move. I would be very grateful if some could help me!

Thanks

I'm using EZDOK, REX and RealityXP GPS, but no other mods.

Has anyone seen this before?

Thanks

I am having issues stopping the 3D knobs displaying. I have installed RX Garmin GNS 430 and used the FOR CUSTOMIZATION folders with required .cfg edits but the knobs continue to display over the top of the RX instrument. The Carenado Baron 58 has a mini panel that allows you to turn off the knobs is there any way in the F33 to do the same??

However, I can't get my panel lights to work after I have removed the 3D knobs. The GPS does light up, but not the other gauges. Anyone else with this problem or some thoughts?