Can not get auto thumbnail to work.  Installs correctly, have  the original and the latest update that purportedly works on W7 and above.  Have installed it many times but never on W11, am experienced FSX user.  Hopefully I overlooked something simple and someone can offer advice, thank you.

Thanks

I have just installed fsx se on to a new win 11 PC. Fsx is great and as I slowly move addons and programs from my win10pc almost everything is working.

I am having an issue with one addon which is installed but not working like it should as it does on my win10 pc.

I have downloaded simconnect files from justflight, wondering if that is what's need

Question is with the 4 installers is there any order in which to install them

Cheer

Rhys

I followed all instructions, and... you guessed it... no EZCA and it screwed up all the views in FSX. So, I went online and researched this issue and followed all recommendations with no success. I uninstalled EZCA and re-installed it with no results. Using the config tool I reverted to Simconnect 10.0.61259. No results.

So, I uninstalled EZCA and deleted all references to it in the registry. After that I re-installed it and I got it working half way. The issue that I have now is that when FSX starts, EZCA loads as a separate app but not in FSX. I can see this using the task manager. At that point EZCA doesn't show in the Addon menu either and the screen freezes. Okay, then I left it like that, ran the EZCA.exe and the EZCA app in the Task Manager moved from the app section to the Service section and started the 64 bit patch also in the services section. EZCA then loads in the Addon menu and runs normally. Lot of steps to get it running but at least I can use it.

But what happened here? How can I get it to start when FSX starts. Anyone to the challenge? Any ideas?

Thanks in advance.

Can any member point me in the right direction please.

I have activated online flying

Thank you

Donald

I uninstalled prepare 3-D, reinstalled it and ran the exe for my A2A skyhawk, but no joy.

There is no config.sys Files in my prepare 3-D software.

If Someone has a working version of prepare 3-D version five could they post a picture of their system files?

I have a picture of mine, but don’t know how to get it into the post.

what should the path be for the A2 aircraft installation?

Assistance will be appreciated,

Thank you

thank you

sarantopoulos nikos

1.0.20.0

10.0.60905.0

10.0.61242.0

10.0.61259.0

Is this normal for some reason?  Should I uninstall any?

Right now, I do not have a SimConnect issue that I am aware about, but I just want to be sure what is correct on this.

Thanks,

Fred K

Has any-one ever encountered this issue, where the Nd and lower DU screens are swapped and the upper is blank? If so, do you know how to fix? 

Thanks

I am unable to get EZCA 3.1 to work in P3d v5.1 running NGXu 737/800...any help would be great.

Thanks    Brian.

I have a carefully managed FSX setup composed of FSX SP2 (no SDK), ASN, FSC, GSX, FSUIPC, FSXGET, various PMDG planes and other utilities.

Quite recent installation, less than one year, as my old FSX-PC crashed after many years of service. All is installed on a separate SDD to avoid issues and keep the FSX world clean.

My setup has been working as a charm until last Saturday night when I updated to Win11. After the update FSX works well and the other individual components appear to be working as well, BUT it looks like SimConnect has disappeared!

FSUIPC logs that is not finding any of the supported versions, ASN connects to FSX but then throws an exception because "no compatible SimConnect library found", i suspect FSC10 will do the same.  

I had at hand all of the SimConnect.msi kits, and tried to install them one after the other: it looks like the installation starts, I see the eula splash screen, but after the (supposed installation) i do not see any new Simconnect file either in WinSxS or other folders on the PC disks. Also tried to reinstall FSX-sp2 to get it from there. Nothing.

The only Simconnect I see on the whole PC is the one associated to FSXGet, it is visible both in WinSxS and the FSXGet directory but has a name like microsoft.flightsimulator.simconnect.... And in fact FSXGet works with FSX so I can track the flight on GEarth as usual. 

Already tried the known actions: review AV exclusions, UAC, permissions, ... 

It looks that just upgrading to W11 made Simconnect to disappear silently... and now it looks it cannot be installed the ways we are used to-

Any hints on how to solve ? Did some of you already migrated to Win11 without finding this issue ? 

Thanks in advance for any support or hint !

Kind regards,

Aldo Borrione+

I'm hoping someone can help me on a project I'm looking at starting. When I'm not flying for a Virtual Airline I'm flying my own fleet on charter flights and I was curious about live flight tracking that can display the flight track and details on a webpage. I spoke to the IT team at the VA but they obviously wasn't willing to divulge their tracker secrets with me, so I'm looking at creating my own application from the ground up, I've installed VS2019 and I understand that its C++ (never used it).... I have also got the SDK (well what comes with SE edition (I can get the original SDK if needed).

I would appreciate anyone that can offer their help or even co-author with me

Any experience with this?

Thanks

marjimbo

I am trying to get the Fuel gauge to point to zero when the electrical system fails in the aircraft, by adding the failure to the .xml file of the gauge it still doesn't seem to have the desired effect on the gauge, maybe I'm missing something, I have referred to all the simconnect data available and P3D gauge file data, any references that you'll can provide for the same???

Despite Googling, I can't see, to find a list of simconnect variables/events. There is the list that comes up on spadnex when you create an action, but nothing is described.

Does decent documentation exist?

EDIT: I found it.

New question. I found a list of variables. These seem to be mostly bools of various states. So, for instance, I found the state for auto pilot heading lock. This brings another question. Is there a list of "commands"?

I am hoping somebody can help me i have just recently come back to flight simming and have been using pro-atcx for air traffic control ,currently i have this networked on a client pc the problem i am having is that i get no information line on my server pc scrolling across the screen everything else works fine i just don't get the information line. 

regards

Richard Sankey

But I usually create my flight plan from the MCDU on the airbus. 

I have found 
GPS_WP_NEXT_ID

GPS_WP_PREV_ID

as well as the long and lat for those, but not a full list of the waypoints.

I have three versions  here in the C:\Windows\WinSxS folder:

x86_microsoft.flightsimulator.simconnect_67c7c14424d61b5b_10.0.60905.0_none_dd92b94d8a196297

x86_microsoft.flightsimulator.simconnect_67c7c14424d61b5b_10.0.61242.0_none_e079b46b85043c20

x86_microsoft.flightsimulator.simconnect_67c7c14424d61b5b_10.0.61259.0_none_55f5ecdc14f60568

I am not seeing the Microsoft.FlightSimulator.SimConnect.dll installed anywhere on my computer.  Do I need to run  the  setup from C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X SDK\SDK\Core Utilities Kit\SimConnect SDK\lib  folder?  I thought this was for client computers only.

Where does the SimConnect setup install the FlightSimulator.SimConnect.dll i?  In the FSX main folder or C:\Windows\WinSxS folder?  I thought it installed a SimConnect.DLL in the current FSX main folder.  A little confused, here.

Then the next step is to get SP1 and SP2 installed in that order. There are posts out there that go in to detail on how to do this.   I assume this will update SimConnect to the latest version. 

Thanks for any help!

I am correctly reading the simulation rate as a number, being 1 when the sim runs normal and 2, 4, 8 or more when the time is accelerated. The problem is when the sim rate is set to 0.5 or 0.25 to slow the sim, in that case SimConnect says it is 0 because it is always returned as an integer value. I tired to read it as a float (using SIMCONNECT_DATATYPE_FLOAT32 or SIMCONNECT_DATATYPE_FLOAT64) but it doesn't work.

Any idea to read the value correctly?